Search the Community

Today I bought a trial of PIA just to test it out and see how it compared to AirVPN. Well, I installed the PIA client on my Windows computer and wasn't satisfied with PIA, so I uninstalled PIA, uninstalled the TAP driver, then uninstalled Eddie as well to make sure nothing went wrong. Well, it did go wrong somehow. I reinstalled Eddie, logged in, it automatically installed the TAP driver again, and then it wouldn't connect to any servers at all, so I uninstalled and reinstalled again, restarted my PC, and now when I connect to a server with Network Lock on, it looks like there is a DNS error of some sort. Previously, when I went to ipleak.net, the DNS testing was near instant and it said "1 server". Now, it takes a very long time for it to test the DNS and it says "0 servers, 100 errors". Also, loading websites works at first, but 3 or 4 minutes after connecting to VPN, domain names will just not resolve. I type in google.com or airvpn.org and it just stays loading forever. Please help, I have no idea what is wrong either because the Eddie log is perfectly normal as if there were no issues. I have restarted the PC a few more times and uninstalled and re installed Eddie a few times but still no dice

Hi, when, if ever will there be more Japan servers? (Question to staff) At least another one would be nice. It's the ONLY server which gives a good latency when connecting from China. For example, the Japan based Iskandar server can achieve 79ms whereas all the others start at 190ms + when connecting from China. Can other China users verify this is the case for them, too? (All China users reading this please comment about your latency!....)

Source: https://www.bleepingcomputer.com/news/security/voracle-attack-can-recover-http-data-from-vpn-connections/ Hello everyone, I've recently read that article above about this new attack called VORACLE that can possibly allow an attacker to recover data from HTTP traffic sent through a VPN. I've searched these forums for anything mentioning voracle but no results so I'm starting this topic out of interest and concern, and some questions for AirVPN staff. Is AirVPN completely protected from this new attack? Or is this something that AirVPN needs to *address and what can/will be done, if not why? What can AirVPN users do against this if anything or what are the exact steps to configure inside Eddie if anything? (*With the above quote in-mind does AirVPN need to do the same for its service?) Appreciate any replies and interest in the matter. Thanks.

Hello. I read that connecting to AirVPN using port UDP 53 instead of UDP 443 is a way to get better speeds, but when I tried to do it today it could not connect to that port on any server and kept giving me an error. This happened on both my phone (connected with Wi-Fi) and PC (connected with ethernet cable) . I contacted my ISP and asked them if they were blocking any ports, and they said they were only blocking ports 80 and 25. I had the ISP unblock these ports just in case that was somehow the issue, but it was not and VPN on UDP 53 continued to not work. I even tried forwarding UDP port 53 to my devices from my router, but that didn't do anything. However, when I turn off Wi-Fi on my phone and connect to my mobile network, UDP 53 works flawlessly. Here is a log of me trying to connect to an AirVPN server on port UDP 53 on my Wi-Fi using my android phone and the Eddie for Android app Eddie Log created on 09 Aug 2018 19:24:41 UTC Eddie for Android 1.0 RC 2 Version Code 5 09 Aug 2018 19:23:52 UTC [debug] NativeMethods.OVPN3.Init succeeded (version=3) 09 Aug 2018 19:23:52 UTC Network is connected to WIFI 09 Aug 2018 19:23:52 UTC [debug] VPNService.NetworkStatusChanged: action='RESUME' 09 Aug 2018 19:23:52 UTC Network is connected to WIFI 09 Aug 2018 19:23:52 UTC [debug] VPNService.NetworkStatusChanged: action='RESUME' 09 Aug 2018 19:24:03 UTC Network is connected to WIFI 09 Aug 2018 19:24:03 UTC [debug] VPNService.NetworkStatusChanged: action='RESUME' 09 Aug 2018 19:24:03 UTC Network is connected to WIFI 09 Aug 2018 19:24:03 UTC [debug] VPNService.NetworkStatusChanged: action='RESUME' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'tls_version_min:tls_1_0' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'protocol:' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'ipv6:yes' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'timeout:30' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'tun_persist:true' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'compression_mode:yes' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'synchronous_dns_lookup:false' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'autologin_sessions:true' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'disable_client_cert:false' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'ssl_debug_level:0' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'default_key_direction:-1' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'force_aes_cbc_ciphersuites:false' 09 Aug 2018 19:24:04 UTC OpenVPN3: ovpn3_client_set_option '1' - 'tls_cert_profile:' 09 Aug 2018 19:24:04 UTC Eddie Native Library: client '1' starting 09 Aug 2018 19:24:04 UTC Eddie Native Library: loading profile 09 Aug 2018 19:24:04 UTC OpenVPN3: config.protoOverride: 09 Aug 2018 19:24:04 UTC OpenVPN3: config.connTimeout: 30 09 Aug 2018 19:24:04 UTC OpenVPN3: config.compressionMode: yes 09 Aug 2018 19:24:04 UTC OpenVPN3: config.ipv6: yes 09 Aug 2018 19:24:04 UTC OpenVPN3: config.tlsVersionMinOverride: tls_1_0 09 Aug 2018 19:24:04 UTC OpenVPN3: config.tlsCertProfileOverride: 09 Aug 2018 19:24:04 UTC OpenVPN3: config.disableClientCert: false 09 Aug 2018 19:24:04 UTC OpenVPN3: config.proxyHost: 09 Aug 2018 19:24:04 UTC OpenVPN3: config.proxyPort: 09 Aug 2018 19:24:04 UTC OpenVPN3: config.proxyAllowCleartextAuth: false 09 Aug 2018 19:24:04 UTC OpenVPN3: config.defaultKeyDirection: -1 09 Aug 2018 19:24:04 UTC OpenVPN3: config.forceAesCbcCiphersuites: false 09 Aug 2018 19:24:04 UTC OpenVPN3: config.sslDebugLevel: 0 09 Aug 2018 19:24:04 UTC [debug] DoUpdate - Begin 09 Aug 2018 19:24:04 UTC OpenVPN3: config.autologinSessions: true 09 Aug 2018 19:24:04 UTC OpenVPN3: config.tunPersist: true 09 Aug 2018 19:24:04 UTC OpenVPN3: config.synchronousDnsLookup: false 09 Aug 2018 19:24:04 UTC Eddie Native Library: profile loaded, connecting to server 09 Aug 2018 19:24:04 UTC Eddie Native Library: connect_attach 09 Aug 2018 19:24:04 UTC [debug] OnConnectAttach 09 Aug 2018 19:24:04 UTC OpenVPN3: Frame=512/2048/512 mssfix-ctrl=1250 09 Aug 2018 19:24:04 UTC [debug] OpenVPN Event: type=RESOLVE, name=RESOLVE, info=, data=0 09 Aug 2018 19:24:04 UTC Eddie Native Library: connect_pre_run 09 Aug 2018 19:24:04 UTC [debug] OnConnectPreRun 09 Aug 2018 19:24:04 UTC Eddie Native Library: connect_run 09 Aug 2018 19:24:04 UTC OpenVPN3: Contacting 107.150.23.66:53 via UDP 09 Aug 2018 19:24:04 UTC [debug] OpenVPN Event: type=WAIT, name=WAIT, info=, data=0 09 Aug 2018 19:24:04 UTC Eddie Native Library: socket_protect(socket=81) 09 Aug 2018 19:24:04 UTC [debug] OnSocketProtect(socket=81) 09 Aug 2018 19:24:04 UTC OpenVPN3: Connecting to [107.150.23.66]:53 (107.150.23.66) via UDPv4 09 Aug 2018 19:24:14 UTC OpenVPN3: Server poll timeout, trying next remote entry... 09 Aug 2018 19:24:14 UTC [debug] OpenVPN Event: type=RECONNECTING, name=RECONNECTING, info=, data=0 09 Aug 2018 19:24:14 UTC OpenVPN3: Contacting 107.150.23.66:53 via UDP 09 Aug 2018 19:24:14 UTC [debug] OpenVPN Event: type=WAIT, name=WAIT, info=, data=0 09 Aug 2018 19:24:14 UTC Eddie Native Library: socket_protect(socket=77) 09 Aug 2018 19:24:14 UTC [debug] OnSocketProtect(socket=77) 09 Aug 2018 19:24:14 UTC OpenVPN3: Connecting to [107.150.23.66]:53 (107.150.23.66) via UDPv4 09 Aug 2018 19:24:24 UTC OpenVPN3: Server poll timeout, trying next remote entry... 09 Aug 2018 19:24:24 UTC [debug] OpenVPN Event: type=RECONNECTING, name=RECONNECTING, info=, data=0 09 Aug 2018 19:24:24 UTC OpenVPN3: Contacting 107.150.23.66:53 via UDP 09 Aug 2018 19:24:24 UTC [debug] OpenVPN Event: type=WAIT, name=WAIT, info=, data=0 09 Aug 2018 19:24:24 UTC Eddie Native Library: socket_protect(socket=77) 09 Aug 2018 19:24:24 UTC [debug] OnSocketProtect(socket=77) 09 Aug 2018 19:24:24 UTC OpenVPN3: Connecting to [107.150.23.66]:53 (107.150.23.66) via UDPv4 09 Aug 2018 19:24:34 UTC OpenVPN3 CONNECTION_TIMEOUT: CONNECTION_TIMEOUT 09 Aug 2018 19:24:34 UTC VPN error detected. Locking VPN 09 Aug 2018 19:24:34 UTC Eddie Native Library: client '1' pausing 09 Aug 2018 19:24:34 UTC Eddie Native Library: client '1' paused 09 Aug 2018 19:24:34 UTC VPN locked 09 Aug 2018 19:24:34 UTC Eddie Native Library: tun_builder_teardown(disconnect=false) 09 Aug 2018 19:24:34 UTC [debug] OnTunBuilderTeardown(disconnect=0) 09 Aug 2018 19:24:34 UTC OpenVPN DISCONNECTED - DISCONNECTED: 09 Aug 2018 19:24:34 UTC [debug] OnConnectRun 09 Aug 2018 19:24:34 UTC Eddie Native Library: OpenVPN3 client started 09 Aug 2018 19:24:34 UTC Eddie Native Library: client '1' started 09 Aug 2018 19:24:34 UTC Eddie Native Library: client '1' stopping 09 Aug 2018 19:24:34 UTC Eddie Native Library: client '1' stopped 09 Aug 2018 19:24:34 UTC [debug] ClearContexts 09 Aug 2018 19:24:35 UTC Exception: client not initialized (Eddie.NativeAndroidApp.OpenVPNDispatcher.Run)I would highly appreciate if a fix for this issue could be found, thank you.

Hi I'm using a Samsung Galaxy S8+ running Android 8.0 and having issues with the VPN disconnecting after a few minutes (<1 hour) of not using the device. This happens with both OpenVPN for Android & the Eddie - OpenVPN GUI. I've tried uninstalling and reinstalling OpenVPN for Android as well as deleted the config files and redownloaded them, but still doing so. Power Saving mode is off & I've also tried switching to other modes (Game/Entertainment/High performance). Does anyone know why/how to fix this? Apologies if this has already been discussed in another post/thread, I had a look but couldn't find anything, happy to use such a thread if you can point me to it. Thank you.

I recently stumbled upon the AirVPN API. I'd like to use it but the data provided by the api seems to be lacking information about the second generation servers, i.e. additional entry IPs and ipv6 IPs (and whether those features are available). Am I missing something or - if my assumption is correct - are there any plans to update the API to include the missing data?

-

I run OSX 10.12.6 I'm using Eddie 2.15.2 I'm using the latest TBB I've had no problem running Tor over Airvpn with a tor exit node prior to the Internet. I'm trying to run Airvpn over Tor with the Airvpn server prior to the internet. I've looked at https://airvpn.org/tor, as well as every other document that seemed related to my issue. I start the tor browser first, then the Eddie client. I'm able to make a connection from Eddie to tor with the test button within the Eddie client. I'm also able to connect to an airvpn server. However, when I test what my ip address is from the tor browser, it returns the tor exit node address, not the airvpn server address. And when I try another browser, which is not proxied through tor, the ip address returned is that of the airvpn server address. So essentially what I'm seeing is Tor over Airvpn, not Airvpn over Tor. The only difference between connecting using the "tor" proxy in Eddie preferences instead of "none" is that I no longer can directly access .onion sites. Any insight into this issue would be appreciated. AirvpnLog.txt AirvpnSystemReport.txt

Hi, I'm trying to use a NetGear R6300v1 as a VPN Router with the latest DD-WRT build I could find (dd-wrt.v24-36330_NEWD-2_K3.x_mega-R6300). I can establish a TCP/443 connection to AirVPN (using DE or NL servers) and everything is fine in my opinion: There seem to be no DNS leaks and when the VPN goes down the R6300v1 stops traffic over the WAN interface, just as I want it to. With my 100/40 MBit/s NetCologne DSL @ home I see about 15/13 MBit/s VPN Performance on the R6300v1 with TCP, I have not yet seen more than 30% CPU usage on the R6300v1 during Speedtests. Streaming 1080p YouTube videos in a browser window on a PC connected via LAN to the R6300v1 the CPU usage stays below 15%. Streaming 4K video to an iPad connected via 5 GHz WLAN results in 25% to 35% CPU usage on the R6300v1. This is using a TCP connection - I wonder if UDP would give me more performance and if I should strive further to get that up and running? My problem is: With the very same settings - AFAIK I don't have anything TCP exclusive in there - just switching to UDP for connecting to AirVPN I cannot browse anything anymore. DNS resolution still works with UDP, I can ping for example www.heise.de both in Windows and via SSH directly on the R6300v1, I just cannot browse to www.heise.de. On a sidenote, the same is true if I use 'OpenVPN connect' on an iPad (iOS 11.4.1) - when I generate a .ovpn config for TCP/443 to German servers all is well, same config just with UDP/443 not so much on the iPad, too. On a second sidenote, I can get the latest Tomato build I could find for the R6300v1 (tomato-Netgear-R6300V1_RT-AC6x--140-AIO-64K) to do the same and have the same UDP issue as with the DD-WRT load ... I settled for DD-WRT for now because it seems to me the hardware support, especially WLAN AC, is better in the more recent DD-WRT build I'm using. I think I'm either missing something obvious or UDP simply cannot work on the R6300v1 (and an iPad). If anybody has an idea what I should try differently with the settings, I'd very much appreciate the information. Thanks in advance, Kyle

Hi. When connected to an AirVPN-server through a VPN-router... Are there any fixed IPs on the VPN-server that can be used to ping for monitoring the quality of the VPN connection (RRD graphs etc)? I used to be able to use 10.x.0.1 but they do not seem to respond to pings anymore. What is the correct IP to use for this purpose? Kind regards,

Hello I have a very strange problem with my Windows 10 laptop. I try to make a VPN chain. My host OS is a freshly and clean installed Windows 10 Professional without any third party antivirus or firewall installed. I set up an Ubuntu virtual machine in vmware workstation player with NAT network setting. I can successfully connect to the first VPN server on my host OS and start up the virtual machine. When I go to ipleak.net (in the Ubuntu guest OS) i can see the ip address from the first VPN server, so far so good. But when I try to fire up the eddie client in the Ubuntu guest OS and make the second VPN connection it's always stuck on checking route and it fails to connect. After that, I tried to disable the VPN connection on my host OS. I can now make a VPN connection inside the Ubuntu guest OS without any errors. So, a VPN connection is possible on the host and guest OS, but chaining doesn't work. I tried exactly the same on my friends Windows 10 host machine and it worked right away. Why it doesn't on my Windows 10 Laptop?

I'm looking to run AIrVPN on my router as it supports OpenVPN. Since the VPN configured on the router will be fixed, I'm looking for a server that doesn't have too much packet loss, low ping and consistent. What server would you guys recommend for gaming which will also enhance matchmaking?

When I connect to Persei using UDP and the Eddie 2.14.2 my speeds decrease dramatically macOS 10.13.4 (17E202). Not connected to VPN connected to Persei

Hi! We have work witout problems with eddie client , in a few days all servers its really slow some 3 or 15 mb and i dont understand why change browser , check firewall and antivirus rules , and i cannt see any error in log files any help ??or what i need check? have windows 8 service pack 1 os 64bits my connection 100 MB down 30 up regards!

Hello, I really didn't want to write this post, especially after reading the "Config Generator not resolving hosts for Entry IP 2" post and the https://airvpn.org/topic/14378-how-can-i-get-vpn-servers-entry-ip-addresses post over and over again. I read these posts a million times each but still couldn't figure out how to get my entry IP address and I kind of guessed for the DNS. The only command line prompt I could even get a response for was: nslookup nihal.airservers.org. I tried so many variations of nslookup nl.all.vpn.airdns.org (for example, uslookup pavo.airservers.org) and couldn't get the earth one to work either: earth.all.vpn.airdns.org I went to the specs page of the airvpn website looking for the VPN DNS and kind of just guessed with 10.4.0.1 Here we go: Operating System: RouterOpenVPN version: >= 2.4 IPv4 only Servers: by Continent Protocol: TCP Port: 1194 I chose TCP 1194 because the router I'm flashing has Tor capability and I'm shooting for true anonymity. Everything is just about set up and ready to go but despite reading the entry-ip-addresses article over and over again I couldn't seem to ascertain how exactly to get it. Thoughts anyone?

I'm attempting to host a Minecraft server on campus using the provided internet (we aren't allowed to purchase our own) and would like my friends outside campus to be able to connect but they cannot. I've tried to do port forwarding to allow this but it doesn't seem to be working no matter what I try. I can only connect to the server myself when running it locally (connecting to 127.0.0.1) and not when running it through the vpn. Any suggestions?

Hi, I have written an alternative client for AirVPN that I would like to share with you. Just as Eddie, it supports other providers, too, as long as OpenVPN config files are provided. For AirVPN and Mullvad it offers a convenient update function that just requires you to enter your credentials in order to download the latest server configurations. Furthermore, it allows you to choose among the plethora of protocols offered by AirVPN (including OpenVPN over SSL/SSH) except the experimental ones (I might add support for those in the future, once they become available for all servers). Qomui (Qt OpenVPN management UI) as I have named it, is written in Python and PyQt and should run on any GNU/Linux distribution. It allows you to easily create double-hop connections. In other words, you can route your requests via two OpenVPN servers. This feature works provider-independent. For example, you could choose a Mullvad server for the first hop, and AirVPN for the second (I have successfully tested this with AirVPN, Mullvad and ProtonVPN). Thereby, it avoids a major downside of similar offers by some providers, namely the fact that if one provider controls all "hops" he or she could potentially still see, log or inspect all your traffic. In the latter case, you would gain little in terms of privacy. With the ability to "mix" providers, Qomui does not suffer from the same problem and hence offers some tangible benefits. Obviously, you would still have to sacrifice some speed/bandwith, though. Depending on your DE (looking at you, Gnome!), Qomui will also display a systray icon that shows the country of the server you are currently connected to. Additional features include protection against DNS leaks and a firewall that optionally blocks all outgoing network connections except for the OpenVPN server you have chosen. Since it is never recommended to run graphical applications as root, which is a major flaw of most OpenVPN clients, all commands that require root privileges are handled by a background service that can be controlled via systemd. The following screenshot gives you an idea of what Qomui looks like (on Arch/Arc Dark Theme). If you are interested, you can download Qomui from github: https://github.com/corrad1nho/qomui Of course, I'd be happy for any kind of feedback. If you find bugs or Qomui does not run properly or not at all on your machine, please let me know. I'm happy to help! At last, a big thank you to AirVPN and its amazing community. The fact that you rely more on explaining technical details than empty promises, has helped me to learn a lot. It is also one of the main reason why I chose AirVPN. Commendably, Eddie is also released as open-source software. Only Mullvad does that, too, to my knowledge. Why doesn't every provider do that? You are selling a service, not software! Why would I trust in proprietary software? Funnily, I have never really used Eddie, though, since I was accustomed to manually adding config files to NetworkManager as my first provider did not offer a GNU/Linux client. My interest in features such as OpenVPN over SSL made me look into more convenient solutions, though. Ultimately I decided to write my own program as I wanted to learn some Python and this provided a perfect practical challenge. I have actually used Qomui daily on multiple machines during the past few months and constantly tried to improve it. So I'd thought it'd be about to time to share it (it's an alpha release, though). Have a nice weekend! Corrado

I've been noticing this lately in wireshark. I'm using OpenVPN 2.4.5. Its sending and receiving to the VPN server, however Wireshark shows it is using IPv4, and not the OpenVPN protocol. Is this something to be concerned about, and if so, how can I fix this issue while using OpenVPN?

Will this enhance security and reduce chances of DNS leakages on AirVPN? Or can this cause problems? Thank you so much!

Hi there, I am totally new to vpn and I just curious about how that all works and how to do it right, and now I am quite confused about thousand different setup methods. I have a plain linux box which runs a service Y on a specific port that shall go throught airvpn. So far I only read that once openvpn is started all traffic goes through the vpn. If I simply start the vpn as descibed here https://airvpn.org/topic/11431-using-airvpn-with-linux-from-terminal/ on the box does this mean that everyone on the other side of the vpn can portscan/connect to services that are running on that box? If I manage that box from another client in my LAN via a vncserver that is installed on that box, can I still reach the box after starting openvpn and can anyone on the other vpn side connect to the vncserver? So my question is what is the easyest way to route only service Y to the vpn and make incomming (from the vpn) request route only to service Y's port?

Apparently it is as easy as adding the following to the client/server OPVN files: http://my.host.net.nz/2014/04/12/adding-perfect-forward-secrecy-to-openvpn/ Create a common private key, eg openvpn --genkey --secret /path/to/store/pfs.key Securely distribute this key to each OpenVPN client, then add the following to the server tls-servertls-auth /path/to/store/pfs.key 0 and this to each client tls-clienttls-auth /path/to/store/pfs.key 1 Without this, using OpenVPN standalone will lack some essential security features.

Just a short question to the admins here. I would like to use the AirVPN DNS servers on my VPN routers. The manuals (DD-WRT and Tomato) are referring to the Specs Page but I can't find them there anymore.

Hi, I have an issue with my home network. I have an ASUS RT-AC87U router. I use Expressvpn on the router with polcy routing. My Mac is connected straight to the WAN but I use AirVPN'd client Eddie. I have had no issues with either Expressvpn or AirVPN. Last night I spent serveral hours on my universities website doing work. At the end of the night I decided to just check everything was running ok with the VPN connections. I found no matter what I did (clear caches, delete cookies, check my dns settings, renew the lease etc) this problem persists. My iPhone uses the Expressvpn (openvpn in the router) and my mac uses the AirVPN client eddie. When I run the ipleak.net test I receive 100 DNS errors. I have not changed any settings in the router whatsoever. I've changed nothing. See the screenshots ... (Sweden is AirVPN, US is Expressvpn) Obviously the error is being caused within my router, which I have restarted and checked for a ASUS-WRT Merlin update).

Dear Users, Support Stuff, I have a Problem to solve, i try to Run a Web Server. My ISP dont like this and have restrictions over all Ports from Outbound. So i try with a VPN, i have a Port Forwarding, Port is Open with the Connection to the VPN. If i Open the Browser to the VPN IP and the Port from the VPN i have a Network Timeout. Always... I have Down Speed 20mb / Up Speed 6 mb I stopped my Firewall but the same Error ( if you think from my Firewall ) I dont knwo so solve this one, little bit Network Technic i understand. If possible you can Help me. Im so sorry for my ugly English, i know. Im from the German Language Part of Switzerland. Kind regards Chris

Hi, Totally new to doing VPN over TOR. I'm just seeing what its like to set up. I'm using an iMac 27" macOS 10.13.3 & Eddie 2.12.4. I have Tor Browser installed and running fine, its connected to TOR. I followed the instructions on this page: https://airvpn.org/tor/ - In Preferences for Eddie Proxy/Tor>Type>Tor I clicked the test and Eddie indicates there is connectivity to Tor. Am I actually running the VPN through TOR as it is? See images. The Test indicates there is connectivity. But how do I know the VPN traffic is running through TOR? ipleak.net doesn't indicate any tor exit node. Any help or suggestion will be appreciated. Cheers.