Search the Community

I've been using Kubuntu for quite a while, it's a nice graphical interface that doesn't require a lot of knowledge for normal use. When necessary I can use a terminal window. I downloaded and installed eddie-ui_2.12.4_linux_x64_debian.deb. The install went fine and AirVPN is in my application launcher. When I click on it to start the program the icon bounces above the cursor as usual and the AirVPN program appears for several seconds on the task manager bar and vanishes. I'm dead in the water until I can get it to load, so any help would be appreciated.

Hello everybody, Maybe somebody can support me here. I am trying to get the whole thing running with the original Portable Linux Client of AirVPN. After I had the "net-tools" installed, the tool establishes a connection to AirVPN, but breaks the connection after a few moments, since no DNS server can be found. Of course, I have already researched the topic and found some tips that point to the DNS server "nameserver 10.4.0.1" to write to the file "/etc/resolv.conf". Since this file is always overwritten again, I had the file with "sudo chattr + i /etc/resolv.conf" protected and so the new DNS server actually remained in the 1.Line. But also the tool does not find a DNS server. My other system then synonymous only again, if the new DNS server again disappears. Does someone have you an idea how I get that running?

Hi all, I've followed the instructions at https://airvpn.org/topic/11431-using-airvpn-with-linux-from-terminal/ in order to set up my account. This works fine and leak-free, when my local networks gives me an IPv4 address -- but if I get an IPv6 address, that address is leaked to remote sites according to https://ipleak.net/ . How do I prevent that? Thanks, Chris

I wanted to install airvpn software on a linux terminal, but I can't find any tutorials or even commands that I should run, I'm a beginner so I don't know how should I do it without tutorial. I searched around and there is nothing that helped. I don't want to mess around through ftp and move .deb packages to linux, is there a way to run one command and do it all? I read some discussions here and I suppose those people who downloaded openvpn configs had graphical interface. The only thing I did was Import our maintainer key for validating signature: wget -qO - https://eddie.website/repository/keys/eddie_maintainer_gpg.key|sudo apt-key add - Couldn't run deb commands because I don't have the deb package. deb http://eddie.website/repository/apt stable main -bash: deb: command not found sudo apt-get install deb Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package deb I tried to download linux > 64bit > portable > command line, but again, it's just a tar.gz file, there are no commands on how to do it via ssh. Tried to download deb package remotely via SSH, but the link is encrypted or dynamic and not a direct link, also showing error 500...It seems in the past there were direct links (https://askubuntu.com/questions/825193/how-can-apt-get-deal-with-dependency-problems-associated-with-a-slightly-problem) /home# wget https://eddie.website/download/?platform=linux&arch=x64&ui=cli&format=portable.tar.gz&version=2.12.4&r=0.8266051129146859 [1] 28514 [2] 28515 [3] 28516 [4] 28517 [5] 28518 [2] Done arch=x64 [3] Done ui=cli [4]- Done format=portable.tar.gz [5]+ Done version=2.12.4 root@...:~/home# --2017-07-04 02:22:53-- https://eddie.website/download/?platform=linux Resolving eddie.website (eddie.website)... 2a03:b0c0:2:d0::11b4:6001, 188.166.41.48 Connecting to eddie.website (eddie.website)|2a03:b0c0:2:d0::11b4:6001|:443... connected. HTTP request sent, awaiting response... 500 Internal Server Error 2017-07-04 02:22:53 ERROR 500: Internal Server Error. There are like 10 dependencies for this to run and not one command or guide on how to install airvpn easily via terminal... I have to waste my time to reupload .deb file on some file hosting now to download it by using wget... Instead of 5 minutes this will take me 1 hour now... ~/home# apt-get install gksu mono-runtime mono-utils libmono-system-runtime2.0-cil libmono-winforms2.0-cil libmono-corlib2.0-cil openvpn stunnel4 Reading package lists... Done Building dependency tree... 50% Building dependency tree Reading state information... Done Package libmono-corlib2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel Package libmono-system-runtime2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel Package libmono-winforms2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel E: Package 'libmono-system-runtime2.0-cil' has no installation candidate E: Package 'libmono-winforms2.0-cil' has no installation candidate E: Package 'libmono-corlib2.0-cil' has no installation candidate Doing this from this tutorial https://askubuntu.com/a/80593 /home# tar xvzf eddie-cli_2.12.4_linux_x64_portable.tar.gz eddie-cli_2.12.4_linux_x64_portable/ eddie-cli_2.12.4_linux_x64_portable/libgdiplus.so.0 eddie-cli_2.12.4_linux_x64_portable/openvpn eddie-cli_2.12.4_linux_x64_portable/cacert.pem eddie-cli_2.12.4_linux_x64_portable/update-resolv-conf eddie-cli_2.12.4_linux_x64_portable/stunnel eddie-cli_2.12.4_linux_x64_portable/eddie-cli eddie-cli_2.12.4_linux_x64_portable/libMonoPosixHelper.so root@...:~/home# ./configure -bash: ./configure: No such file or directory root@...:~/home# cd eddie-cli_2.12.4_linux_x64_portable root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# ./configure -bash: ./configure: No such file or directory tar -xzf eddie-cli_2.12.4_linux_x64_portable.tar.gz root@...:~/home# cd eddie-cli_2.12.4_linux_x64_portable root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# ./configure -bash: ./configure: No such file or directory root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# make make: *** No targets specified and no makefile found. Stop. root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# sudo make install make: *** No rule to make target 'install'. Stop. root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# I installed .deb with a UI - there were no .deb without UI, hoping that it also can work only via command line. This is the error I got when running it, I suppose it's only for graphical UI ('Could not open display') sudo dpkg -i --ignore-depends=libmono-system-runtime2.0-cil --ignore-depends=libmono-winforms2.0-cil --ignore-depends=libmono-corlib2.0-cil eddie-ui_2.12.4_linux_x64_debian.deb Selecting previously unselected package airvpn. (Reading database ... 64452 files and directories currently installed.) Preparing to unpack eddie-ui_2.12.4_linux_x64_debian.deb ... Unpacking airvpn (2.12.4) ... Setting up airvpn (2.12.4) ... Processing triggers for man-db (2.7.6.1-2) ... Processing triggers for mime-support (3.60ubuntu1) ... root@...:~/home# airvpn I 2017.07.04 02:47:26 - Eddie client version: 2.12.4 / linux_x64, System: Linux, Name: Ubuntu 17.04 Linux generic #22-Ubuntu SMP Thu Apr 20 09:22:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Server : 546655 IPv4 : IPv6 : ... Hostname : ..., Mono/.Net Framework: v4.0.30319 . 2017.07.04 02:47:26 - Reading options from /root/.airvpn/AirVPN.xml . 2017.07.04 02:47:26 - Profile options not found, using defaults. Unhandled Exception: System.TypeInitializationException: The type initializer for 'System.Windows.Forms.WindowsFormsSynchronizationContext' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Windows.Forms.XplatUI' threw an exception. ---> System.ArgumentNullException: Could not open display (X-Server required. Check your DISPLAY environment variable) Parameter name: Display at System.Windows.Forms.XplatUIX11.SetDisplay (System.IntPtr display_handle) [0x00435] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11..ctor () [0x00077] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11.GetInstance () [0x0001c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUI..cctor () [0x0007d] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at System.Windows.Forms.Theme.get_MenuAccessKeysUnderlined () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.SystemInformation.get_MenuAccessKeysUnderlined () [0x00005] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x000ea] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.Control:.ctor () at System.Windows.Forms.WindowsFormsSynchronizationContext..cctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at (wrapper managed-to-native) System.Object:__icall_wrapper_mono_generic_class_init (intptr) at System.Windows.Forms.WindowsFormsSynchronizationContext.get_AutoInstall () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x00014] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at Eddie.UI.Linux.Program.Main () [0x000c3] in <827d8be374f3486292e08d514075969c>:0 [ERROR] FATAL UNHANDLED EXCEPTION: System.TypeInitializationException: The type initializer for 'System.Windows.Forms.WindowsFormsSynchronizationContext' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Windows.Forms.XplatUI' threw an exception. ---> System.ArgumentNullException: Could not open display (X-Server required. Check your DISPLAY environment variable) Parameter name: Display at System.Windows.Forms.XplatUIX11.SetDisplay (System.IntPtr display_handle) [0x00435] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11..ctor () [0x00077] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11.GetInstance () [0x0001c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUI..cctor () [0x0007d] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at System.Windows.Forms.Theme.get_MenuAccessKeysUnderlined () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.SystemInformation.get_MenuAccessKeysUnderlined () [0x00005] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x000ea] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.Control:.ctor () at System.Windows.Forms.WindowsFormsSynchronizationContext..cctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at (wrapper managed-to-native) System.Object:__icall_wrapper_mono_generic_class_init (intptr) at System.Windows.Forms.WindowsFormsSynchronizationContext.get_AutoInstall () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x00014] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at Eddie.UI.Linux.Program.Main () [0x000c3] in <827d8be374f3486292e08d514075969c>:0 Edit: Just figured out that if I want to use command-line I have to add -cli... Edit2: After connecting to best available server, linux crashed.. Now can't connect. 17:40:55.181 Key exchange #36 started by client. 17:40:55.744 Key exchange #36 completed. 18:11:01.036 The SSH2 session has terminated with error. Reason: FlowSocketReader: Error receiving bytes. Windows error 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. 18:11:01.041 Automatic reconnection started. Reconnection attempt is scheduled at 18:11:03. This is the last log before crashing . 2017.07.04 03:16:39 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA . 2017.07.04 03:16:39 - OpenVPN > [server] Peer Connection Initiated with [AF_INET]... . 2017.07.04 03:16:40 - OpenVPN > SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) . 2017.07.04 03:16:40 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.113.245 255.255.0.0' . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: compression parms modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: route options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: route-related options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified . 2017.07.04 03:16:40 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.07.04 03:16:40 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.07.04 03:16:40 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.07.04 03:16:40 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.07.04 03:16:40 - OpenVPN > ROUTE_GATEWAY .../255.255.255.0 IFACE=eth0 HWADDR=... . 2017.07.04 03:16:40 - OpenVPN > TUN/TAP device tun0 opened . 2017.07.04 03:16:40 - OpenVPN > TUN/TAP TX queue length set to 100 . 2017.07.04 03:16:40 - OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0 . 2017.07.04 03:16:40 - OpenVPN > /sbin/ip link set dev tun0 up mtu 1500 . 2017.07.04 03:16:40 - OpenVPN > /sbin/ip addr add dev tun0 .../16 broadcast ... . 2017.07.04 03:16:45 - OpenVPN > /sbin/ip route add .../32 via ... . 2017.07.04 03:16:45 - OpenVPN > /sbin/ip route add 0.0.0.0/1 via 10.4.0.1

Hi, my setup is a fresh install of Debian 9 and i run Eddie in an lxde session. everything works perfect, except the dns. Sometimes it seems to work at first but that's always right after you did reconnect to the vpn, so idk what that means. Perhaps any other application editing iptables etc? i didn't find anything like that, at least for now. would be really nice if someone has any idea here if you need any files just ask and I post Edit: some more information: i already tested all the DNS modes(auto and the 2 "linux only" ones), none work. I also tried to add a dns myself but nothing worked

Hey Guys - I just recently started using AirVPN and have spent the weekend setting up a few things. I subscribed to AirVPN with the plan of using a local VM with my fiber connection instead of a remote Seedbox. My goal is to have the local VM on 24/7 running Deluge and have it save all completed files to my primary system. I host too many things on my primary system plus must connect to work's VPN on it which is why I'm using this setup. I've already mounted the share for the downloads in the VM, set everything up, and all seems to be working except one thing. Just wanted to ask a couple of questions including verification that how I set it up is the best suggested method for what I'm trying to do, please. Questions 1. From Deluge's WebUI in a browser, I can connect to Deluge's Daemon. From the WebUI, it connects to 127.0.0.1:58846 (local ip because it's hosted on same system as daemon. However, when I try to connect to the Daemon using the Deluge Client with classic mode disabled, I cannot from my PC using the local IP and same port or even on the hosting PC using 127.0.0.1:58846. This only occurs when the VPN is connected. I tried connecting via DDNS from a forwarded port I created using 58846 as local port but also didn't work 2. Even though I installed AirVPN in the VM (Ubuntu 17.04 x64), it didn't have an option to launch at boot so instead I installed openvpn as a service and have it configured to launch the config file I downloaded at boot to automatically connect. Does connecting this way still offer all of the features such as ports I forward? If not or there's a better way to accomplish this, please let me know 3. Is there a way to implement network lock when using the openvpn method above - or - if openVPN looses connection, will it automatically reconnect? If VPN fails for some reason, I don't want it to continue downloading torrents. VM Environment - Ubuntu 17.04 x64 (hosted on ESXi 6.5) --- Folder mounted to Windows share for completed downloads - each label goes to different folder within mounted share --- AirVPN 2.12.4 installed via .deb (Even though currently not using client to connect) --- openVPN 2.4.0 --- Deluge / Deluged / Deluge WebUI 1.3.15 Conf File (Snippet) Below is the first part of my conf file I build & downloaded. If anything needs to be changed to accommodate anything above, please let me know. #####clientdev tunproto udpremote america.vpn.airdns.org 443resolv-retry infinitenobindpersist-keypersist-tunremote-cert-tls servercipher AES-256-CBCcomp-lzo noroute-delay 5verb 3explicit-exit-notify 5##### Thanks Guys!

When I check my IP while running Eddie on most Canadian servers, it shows a USA address. IPv6 leak checks always show Canada. ...Just wondering if something's wrong with my (Linux) setup, and/or if I need to be concerned? - Thanks

Greetings, Long Story short; I have a Netgate APU with pfSense configured with one "Clear" Network, i.e. no VPN connection, and one VPN Network connected to AirVPN. The clear network has the WiFi AP on it, and most of the time, my laptop (Fedora 25) is connected to the Clear network, but is connected to another VPN provider separately. However, running DNS leak test (dnsleaktest.org, whoer.net etc) sometimes shows the AirVPN DNS on the Clear network, both then devices are connected to a seperate VPN on the clear network, and when they are not. Is this an AirVPN issue, or some sort of lacking pfSense configuration? Would this perhaps be a questions better suited for the pfSense forum? Thanks for any help.

Here's a strange problem. I use openvpn to connect to AirVPN, with the update-resolv-conf script to prevent DNS 'leaks' (I know they "don't happen on Linux", but that's what I'm calling it). After starting the VPN, going to dnsleaktest.com, and hitting the extended test, the first query comes back as 2 and shows both my ISP and Air, and all of the rest come back as 1 showing only Air. If I retest or go to another DNS leak checking site (like ipleak.net) after doing this, only Air is shown. If I go to a different site and check *before* using dnsleaktest.com, it will detect my ISP. If I retest, it still shows my ISP along with Air. In short, I am getting DNS 'leaks' until I test for them using dnsleaktest.com. What could be causing this, and how can I fix it? Edit: It seems that testing with dnsleak.com also 'fixes' it.

Anyone able to get netselect (http://apenwarr.ca/netselect/) on linux to work at picking the "best" server? Does nothing but timeout for me.

Hi Everyone I am helping a friend make the transition from windows to Linux. Everything is working just fine for him except we can not get magnet links to work when the VPN is on. He is running Ubuntu 16.04, connecting to VPN using openvpn and is using Vuze for a torrent client. Torrent files download fast and web browsing works perfectly but magnet links fail to do anything, they just sit there trying to connect, they never connect or throw a error. As soon as I take the vpn down the connect immediately. I have tried both UDP and TCP Vpn connections and several different torrent clients and get the same results. I have a similar setup on one of my machines and have not had any problems with magnet links and cannot figure out what is going on. Any help is greatly appreciated.

Hello there! Is there a way to hide Eddie in the tray under linux so it wont appear in the window list?

Hi Arch Linux (Gnome desktop). Downloaded Eddie 2.12.4 from AirVPN, ran it as-is and I can't connect. It attempts the connection to a recommended server. Client output is like this: Checking DNS then Checking DNS don't match then Disconnecting then Restarting in 3 seconds It tries to another server and fails again in the same way. Suggestions? Thanks in advance! Logs: I 2017.04.08 18:59:09 - Session starting. . 2017.04.08 18:59:09 - Unable to understand if IPv6 is active. I 2017.04.08 18:59:09 - Checking authorization ... ! 2017.04.08 18:59:10 - Connecting to Zaniah (Sweden, Uppsala) . 2017.04.08 18:59:10 - OpenVPN > OpenVPN 2.4.1 x86_64-unknown-linux-gnu [sSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Mar 22 2017 . 2017.04.08 18:59:10 - OpenVPN > library versions: OpenSSL 1.0.2k 26 Jan 2017, LZO 2.10 . 2017.04.08 18:59:10 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:3100 . 2017.04.08 18:59:10 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.04.08 18:59:10 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.04.08 18:59:10 - OpenVPN > TCP/UDP: Preserving recently used remote address: [AF_INET]62.102.148.136:443 . 2017.04.08 18:59:10 - OpenVPN > Socket Buffers: R=[212992->212992] S=[212992->212992] . 2017.04.08 18:59:10 - OpenVPN > UDP link local: (not bound) . 2017.04.08 18:59:10 - OpenVPN > UDP link remote: [AF_INET]62.102.148.136:443 . 2017.04.08 18:59:10 - OpenVPN > TLS: Initial packet from [AF_INET]62.102.148.136:443, sid=25ac96c4 18d65c12 . 2017.04.08 18:59:10 - OpenVPN > VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.org . 2017.04.08 18:59:10 - OpenVPN > VERIFY KU OK . 2017.04.08 18:59:10 - OpenVPN > Validating certificate extended key usage . 2017.04.08 18:59:10 - OpenVPN > ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication . 2017.04.08 18:59:10 - OpenVPN > VERIFY EKU OK . 2017.04.08 18:59:10 - OpenVPN > VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.org . 2017.04.08 18:59:10 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA . 2017.04.08 18:59:10 - OpenVPN > [server] Peer Connection Initiated with [AF_INET]62.102.148.136:443 . 2017.04.08 18:59:11 - OpenVPN > SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) . 2017.04.08 18:59:11 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.78.49 255.255.0.0' . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: compression parms modified . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: route options modified . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: route-related options modified . 2017.04.08 18:59:11 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified . 2017.04.08 18:59:11 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.04.08 18:59:11 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.04.08 18:59:11 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.04.08 18:59:11 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.04.08 18:59:11 - OpenVPN > ROUTE_GATEWAY 192.168.0.1/255.255.255.0 IFACE=enp3s0f0 HWADDR=00:90:f5:bb:61:5c . 2017.04.08 18:59:11 - OpenVPN > TUN/TAP device tun0 opened . 2017.04.08 18:59:11 - OpenVPN > TUN/TAP TX queue length set to 100 . 2017.04.08 18:59:11 - OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0 . 2017.04.08 18:59:11 - OpenVPN > /usr/bin/ip link set dev tun0 up mtu 1500 . 2017.04.08 18:59:11 - OpenVPN > /usr/bin/ip addr add dev tun0 10.4.78.49/16 broadcast 10.4.255.255 . 2017.04.08 18:59:16 - OpenVPN > /usr/bin/ip route add 62.102.148.136/32 via 192.168.0.1 . 2017.04.08 18:59:16 - OpenVPN > /usr/bin/ip route add 0.0.0.0/1 via 10.4.0.1 . 2017.04.08 18:59:16 - OpenVPN > /usr/bin/ip route add 128.0.0.0/1 via 10.4.0.1 . 2017.04.08 18:59:16 - Starting Management Interface . 2017.04.08 18:59:16 - OpenVPN > Initialization Sequence Completed . 2017.04.08 18:59:16 - /etc/resolv.conf moved to /etc/resolv.conf.eddie as backup . 2017.04.08 18:59:16 - DNS of the system updated to VPN DNS (Rename method: /etc/resolv.conf generated) I 2017.04.08 18:59:16 - Checking route I 2017.04.08 18:59:16 - Checking DNS E 2017.04.08 18:59:16 - Checking DNS don't match . 2017.04.08 18:59:16 - Checking DNS (2° try) E 2017.04.08 18:59:17 - Checking DNS don't match . 2017.04.08 18:59:17 - Checking DNS (3° try) E 2017.04.08 18:59:19 - Checking DNS don't match E 2017.04.08 18:59:19 - DNS checking failed. . 2017.04.08 18:59:19 - OpenVPN > MANAGEMENT: Client connected from [AF_INET]127.0.0.1:3100 ! 2017.04.08 18:59:19 - Disconnecting . 2017.04.08 18:59:19 - Management - Send 'signal SIGTERM' . 2017.04.08 18:59:19 - OpenVpn Management > >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info . 2017.04.08 18:59:19 - OpenVPN > MANAGEMENT: CMD 'signal SIGTERM' . 2017.04.08 18:59:19 - OpenVPN > SIGTERM received, sending exit notification to peer . 2017.04.08 18:59:24 - OpenVPN > /usr/bin/ip route del 62.102.148.136/32 . 2017.04.08 18:59:24 - OpenVPN > /usr/bin/ip route del 0.0.0.0/1 . 2017.04.08 18:59:24 - OpenVPN > /usr/bin/ip route del 128.0.0.0/1 . 2017.04.08 18:59:24 - OpenVPN > Closing TUN/TAP interface . 2017.04.08 18:59:24 - OpenVPN > /usr/bin/ip addr del dev tun0 10.4.78.49/16 . 2017.04.08 18:59:24 - OpenVPN > SIGTERM[soft,exit-with-notification] received, process exiting . 2017.04.08 18:59:24 - Connection terminated. . 2017.04.08 18:59:24 - DNS of the system restored to original settings (Rename method) I 2017.04.08 18:59:27 - Cancel requested. ! 2017.04.08 18:59:27 - Session terminated.

I am having an issue with my computer (Peppermint 7 and LInux Mint 18 respectively). Whenever I boot up and connect to a VPN server it works fine and no DNS leaks, but when I switch to a different server, ther interner stops working and it says that I am connected to the VPN tunnel. The internet hangs but whenever I connect to an AirVPN server through the Eddie client, it works with no problems at all. (I accidentally turned on Network Lock and it messed up the IPTables, and I do not have a backup.) I did some looking around and Network Lock edits the Linux IpTables and I don't know how to erase the rules. Nothing helps at the moment. Question is, where do I go to fix the issues Network Lock makes? Thanks.

I've been using the Airvpn client on this installation of Ubuntu 14.04 for the past few weeks without any issues. This morning, after I booted my computer, airvpn would connect to one server, stay connected but no websites would load. I tried connecting to several servers in other countries and it didn't even connect. I uninstalled the airvpn client, and then installed the new version, no luck it doesn't connect to any server. It gets stuck at "Checking route" for a minute then disconnects and tries again. As a test, I downloaded the Mullvad client and tried it, it would connect to a server but websites wouldn't load. Really not sure what the issue might be as I didn't install or uninstall any new software last night, and my wifi is working fine, any idea what it might be and how I could fix it? Thanks in advance for your help

I have been trying to get the VPN to work for a few days now, and I have the VPN being created for the tun0 interface. I'm not 100% sure if this is a VPN config error, or another problem. I haven't been able to connect to anything although I am getting data sent out and received back. I'm running on ubuntu and just trying to bind rtorrent to the VPN once I figure it out. I've been trying to use ping to see what I can and can't connect to. Pinging 10.4.0.1 works great. ###:###$ ping -I tun0 10.4.0.1 PING 10.4.0.1 (10.4.0.1) from 10.4.61.179 tun0: 56(84) bytes of data. 64 bytes from 10.4.0.1: icmp_seq=1 ttl=64 time=81.1 ms 64 bytes from 10.4.0.1: icmp_seq=2 ttl=64 time=82.3 ms 64 bytes from 10.4.0.1: icmp_seq=3 ttl=64 time=82.2 ms However, pinging 8.8.8.8 is not. ###:###$ ping -I tun0 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 10.4.61.179 tun0: 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 12 packets transmitted, 0 received, 100% packet loss, time 11088ms And this is the tcpdump data showing that I am actually receiving the ICMP reply. ###:#### tcpdump -i tun0 -n tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tun0, link-type RAW (Raw IP), capture size 262144 bytes 00:25:43.902145 IP 10.4.61.179 > 8.8.8.8: ICMP echo request, id 1939, seq 5, length 64 00:25:43.984580 IP 8.8.8.8 > 10.4.61.179: ICMP echo reply, id 1939, seq 5, length 64 00:25:44.910111 IP 10.4.61.179 > 8.8.8.8: ICMP echo request, id 1939, seq 6, length 64 00:25:44.991955 IP 8.8.8.8 > 10.4.61.179: ICMP echo reply, id 1939, seq 6, length 64 00:25:45.918162 IP 10.4.61.179 > 8.8.8.8: ICMP echo request, id 1939, seq 7, length 64 00:25:46.002446 IP 8.8.8.8 > 10.4.61.179: ICMP echo reply, id 1939, seq 7, length 64 00:25:46.926141 IP 10.4.61.179 > 8.8.8.8: ICMP echo request, id 1939, seq 8, length 64 00:25:47.008672 IP 8.8.8.8 > 10.4.61.179: ICMP echo reply, id 1939, seq 8, length 64 00:25:47.934134 IP 10.4.61.179 > 8.8.8.8: ICMP echo request, id 1939, seq 9, length 64 00:25:48.015698 IP 8.8.8.8 > 10.4.61.179: ICMP echo reply, id 1939, seq 9, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel The first thing I thought of when I saw that is that iptables might be doing something weird, so I checked that. I know this isn't the best thing do have on a computer but I'm just trying to get the config working on this first and then I'll move it to a machine with firewall rules on it. ###:###$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Please let me know if I can provide any other information that can be helpful.

Hi, First of all, I'm very happy with the service. AirVPN is simply the best VPN service out there and I am glad to have found you! Running AirVPN on my desktop machines (Win, OSX, Linux) works like a charm either with plain OpenVPN or one of your clients. However, I'm not really sure how I can also use your service on my Linux server to which I connect via ssh. The issue is that as soon as I run openvpn with sudo openvpn --config your_config_file.ovpn naturally the existing ssh connection - as well as any other means to reach my server - gets interrupted. So my use case is that my server should stay reachable publicly as before, but ideally I would like to open a single shell session that gets routed through your VPN for occasional casual browsing or processes which I prefer to use anonymously.. Can I somehow restrict the VPN to only one process? Do you see any other solution for my use case? Best regards!

Hello everyone! I am using AirVPN on Fedora 25 and the first week it worked perfectly. But, as I got a router (D-Link DIR-868L) this week I have started noticing DNS Leaks occurring now and then, and if I bypass the router by connecting straight to wall the DNS leaks go away. It doesn't seem to matter what way I have of connecting to the VPN, I have tried Gnome-Network-Manager, Eddie and using the terminal and it is all the same. How can I fix this?

Hi all, I have been using the program since v2.10, but only from CLI. I have not been able to run the program from GUI, regardless of Linux platform/version or deb/portabel version. The OS is running virtualized. Debian is preferred, but not mandatory. Logs are showing the same errors (null reference, GDI+ status: Invalidparameter) on all the Linux distributions. I'm not ruling out installation errors on my part, so feel free to enlighten me on the correct procedure on latest Debian 8 version. The metod I have been using to install are this from a post in the forum:https://airvpn.org/topic/18625-eddie-211beta-available/?p=47975 Logs from starting the GUI:Feb 16 21:29:23 250debian83 AirVPN.desktop[1234]: I 2017.02.16 21:29:23 - Eddie client version: 2.11.15 / linux_x64, System: Linux, Name: Debian GNU/Linux 8 \n \l, Mono/.Net Framework: v4.0.30319 Feb 16 21:29:23 250debian83 AirVPN.desktop[1234]: . 2017.02.16 21:29:23 - Restarting with admin privileges Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: #033[6n#033[H#033[JI 2017.02.16 21:29:25 - Eddie client version: 2.11.15 / linux_x64, System: Linux, Name: Debian GNU/Linux 8 \n \l, Mono/.Net Framework: v4.0.30319 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: . 2017.02.16 21:29:25 - Reading options from /home/name/.airvpn/AirVPN.xml Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: . 2017.02.16 21:29:25 - Profile options not found, using defaults. Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: Unhandled Exception: Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: System.ArgumentException: A null reference or invalid value was found [GDI+ status: InvalidParameter] Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap:.ctor (System.Drawing.Image,System.Drawing.Size) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip:.ctor (System.Windows.Forms.Control) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Form..ctor () [0x00012] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at Eddie.UI.Linux.Program.Main () [0x000c3] in <4602e22e132042abba2bbc88a7051628>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: [ERROR] FATAL UNHANDLED EXCEPTION: System.ArgumentException: A null reference or invalid value was found [GDI+ status: InvalidParameter] Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <1917aa1c39d94b1a91807b8cd9f03350>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap:.ctor (System.Drawing.Image,System.Drawing.Size) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip:.ctor (System.Windows.Forms.Control) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.Form..ctor () [0x00012] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in :0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: at Eddie.UI.Linux.Program.Main () [0x000c3] in <4602e22e132042abba2bbc88a7051628>:0 Feb 16 21:29:25 250debian83 AirVPN.desktop[1234]: #033[39;49m Any help on getting the GUI running is appreciated!

I do not see my destination on Linux (Debian+Ubuntu) in Chromium or Firefox browsers. I do see the destination on Windows 10 (Firefox+Edge) Any ideas welcome...

I'm trying to log in via GUI using the airvpn_linux_x64_portable with centos. I open the client with: $ sudo ./airvpn Then I type in my loginname and password. Now it says: "Checking login..." and it just keeps doing this. Anyone had this problem before? I logged in using this same client 6 months back and I had no problems. Update: I finally recieved this error message: ! 2017.01.24 19:06:01 - Ready I 2017.01.24 19:06:41 - Checking login ... . 2017.01.24 19:26:02 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (An error occurred performing a WebClient request.)

Hi, Long-time AirVPN user, I'm on a linux PC, using the ufw method described here: (https://airvpn.org/topic/5586-prevent-leaks-with-linux-firestarter-also-stop-traffic-when-vpn-drops/?p=14095). I would like to share this connection with other devices, having my PC serve as a kind of router. Assume I cannot modify my router or the other devices to natively use AirVPN. I have been able to create a wifi hotspot using an ethernet connection. However, my devices are unable to complete the connection until I disable the firewall. Obviously, this is not an acceptable solution as it will allow leaks and I was wondering if anyone here in the community could modify randombit and worric's method to allow hotspot usage.

Think of sshuttle as a "poor man's VPN". You start sudo sshuttle -r 1.2.3.4 0/0 and when you surf to http://ipchicken.com you're IP is 1.2.3.4, as if you were on a VPN. But sshuttle takes a whole different approach via python. If it works, it is great to use with a rental VPS or sth. like that. It may not work on all Linux versions, but if it does, it is less hassle to run and set up than "softether VPN".

Hi all, I am new to AirVPN. I am trying to use it as a way to bypass my ISP block and access my web server. I did configure the VPN with success on my Ubuntu 16.04 machine and i am able to connect to the VPN. Also, I forwarded the traffic to my port 80 and when I check when I check the TCP test everything seems fine (I got a green circle in the AirVPN forwarded port section). Unfortunately, I wasn't able to access the webserver through the given "Mapped to public IP" neither from my same webserver. I also tried with the config files generated using the mode "Direct, protocol UDP, port 80", but still with the same result. Any idea on what am I doing wrong? Thanks in advance, Umberto

Hello, I have a question that maybe someone more knowledgeable can answer. I have a computer at home that runs airvpn client and a remote computer. I want to be able to connect from either computer to another one with ssh. Without airvpn client, everything works (obviously). If I run airvpn without network lock, I can ssh from home to remote (it goes via the AirVPN server) but not from remote to home. I tried to start airvpn with the parameter "routes.custom=my.remote.ip.addr,255.255.255.255,out" but it didn't help - the required route was not added to the routing table. However, that problem was easily solved: I added the route separately with "route add -host my.remote.ip.address gw 192.168.1.1" and all was well: ssh works from home to remote and from remote to home bypassing AirVPN as I want it to do. Now, I enable network lock. This time I need to add "allowed IP" parameter to be able to ssh from home to remote: ./airvpn -cli -connect -netlock -login=**** password=**** netlock.allowed_ips=my.remote.ip.addr But ssh from remote to home is blocked by the firewall. I can't find any airvpn parameter that can be used to create custom firewall rules. So I ended up with adding the required rule myself. Before: # iptables -L -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 177 16717 ACCEPT all -- lo any anywhere anywhere 2 0 0 ACCEPT all -- any any 255.255.255.255 anywhere 3 93 8963 ACCEPT all -- any any 192.168.0.0/16 192.168.0.0/16 4 26 4651 ACCEPT all -- any any 10.0.0.0/8 10.0.0.0/8 5 0 0 ACCEPT all -- any any 172.16.0.0/12 172.16.0.0/12 6 0 0 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 7 1890 460K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 8 0 0 ACCEPT all -- tun+ any anywhere anywhere 9 6 502 DROP all -- any any anywhere anywhere Add the rule: iptables -t filter -I INPUT 9 -i eth0 -p tcp -s my.remote.ip.addr --dport 22 -j ACCEPT After: # iptables -L -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 182 17197 ACCEPT all -- lo any anywhere anywhere 2 0 0 ACCEPT all -- any any 255.255.255.255 anywhere 3 107 10296 ACCEPT all -- any any 192.168.0.0/16 192.168.0.0/16 4 41 6945 ACCEPT all -- any any 10.0.0.0/8 10.0.0.0/8 5 0 0 ACCEPT all -- any any 172.16.0.0/12 172.16.0.0/12 6 0 0 ACCEPT icmp -- any any anywhere anywhere icmp echo-request 7 1981 480K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 8 0 0 ACCEPT all -- tun+ any anywhere anywhere 9 0 0 ACCEPT tcp -- eth0 any my.remote.ip.addr anywhere tcp dpt:22 10 6 502 DROP all -- any any anywhere anywhere Now everything works again, but the question remains: what is the best way to achieve that ? In the worst case scenario, I can just start airvpn in the background, wait a minute or so and then run iptables with my additional rule. But that looks ugly. Can anyone think of a better way ? Maybe some "event.session..." or "event.vpn..." parameter will do the trick ? Thanks for any help.