Leaderboard

Hello! We're very glad to inform you that three new 10 Gbit/s full duplex servers located in Toronto (Ontario), Canada, are available: Castula, Chamukuy and Elgafar. The AirVPN client will show automatically the new servers; if you use any other OpenVPN or WireGuard client you can generate all the files to access them through our configuration/certificates/key generator (menu "Client Area"->"Config generator"). The servers accept connections on ports 53, 80, 443, 1194, 2018 UDP and TCP for OpenVPN and ports 1637, 47107 and 51820 UDP for WireGuard. They support OpenVPN over SSL and OpenVPN over SSH, TLS 1.3, OpenVPN tls-crypt and WireGuard. Full IPv6 support is included as well. As usual no traffic limits, no logs, no discrimination on protocols and hardened security against various attacks with separate entry and exit-IP addresses. You can check the status as usual in our real time servers monitor : https://airvpn.org/servers/Castula https://airvpn.org/servers/Chamukuy https://airvpn.org/servers/Elgafar/ Do not hesitate to contact us for any information or issue. Kind regards & datalove AirVPN Staff

Congratulations on the launch. This is great news for CA which has had most of its 2 Gbit/s servers pretty saturated during peak hours. Hopefully the ghost of Wurren does not come back to haunt us.

Hello! We're very glad to announce that Eddie Android edition 4.0.0 Beta 1 is now available. This is a major update: for the first time Eddie Android edition features AmneziaWG complete support. Eddie Android edition is a fully integrated with AirVPN, free and open source client allowing comfortable connections to AirVPN servers and generic VPN servers offering compatible protocols. Eddie 4.0.0 aims primarily at adding, besides the already available OpenVPN and WireGuard, a thorough and comfortable AmneziaWG support. AmneziaWG is a free and open source fork of WireGuard by Amnezia inheriting the architectural simplicity and high performance of the original implementation, but eliminating the identifiable network signatures that make WireGuard easily detectable by Deep Packet Inspection (DPI) systems. It can operate in several different ways, including a fallback, "compatibility mode" with WireGuard featuring anyway various obfuscation techniques. What's new in Eddie 4.0.0 AmneziaWG support Amnezia WireGuard API updated OpenSSL, OpenVPN3-AirVPN and WireGuard libraries see the complete changelog below AmneziaWG overview From the official documentation: https://docs.amnezia.org/documentation/amnezia-wg AmneziaWG offers: Dynamic Headers for All Packet Types (compatibility with WireGuard: YES) During tunnel initialization, the library generates a set of random constants applied to each of the four WireGuard packet formats: Init, Response, Data, Under‑Load. These constants: Replace predictable WireGuard packet identifiers; Shift offsets of Version/Type fields; Modify reserved bits. As a result, no two clients have identical headers, making it impossible to write a universal DPI rule. Handshake Length Randomization (compatibility with WireGuard: NO) In WireGuard, the Init packet is exactly 148 bytes, and the Response packet is exactly 92 bytes. AmneziaWG adds pseudorandom prefixes S1 and S2 (0-64 bytes by default): len(init) = 148 + S1 len(resp) = 92 + S2 Offsets of the remaining fields are automatically adjusted, and MAC tags are recalculated accordingly. In order to keep backward compatibility with WireGuard, S1 and S2 must be set to 0. Obfuscation Packets I1-I5 (Signature Chain) & CPS (Custom Protocol Signature) (compatibility with WireGuard: partial, with fallback) Before initiating a "special" handshake (every 120 seconds), the client may send up to five different UDP packets fully described by the user in the CPS format. In this way AmneziaWG can mimic perfectly QUIC, DNS and other protocols adding powerful methods to circumvent blocks. QUIC is particularly interesting as HTTP/3 is built on it and currently, from Chrome and other compatible browsers, 50% of traffic to/from Google is QUIC traffic. Therefore, blocking QUIC may have major disruptions for any ISP. Junk‑train (Jc) (compatibility with WireGuard: YES) Immediately following the sequence of I-packets, a series Jc of pseudorandom packets with lengths varying between Jmin and Jmax is sent. These packets blur the timing and size profile of the session start, significantly complicating handshake detection. Under‑Load Packet (compatibility with WireGuard: YES) In WireGuard, a special keep-alive packet (“Under-Load”) is used to bypass NAT timeouts. AmneziaWG replaces its fixed header with a randomized one, the value of which can be set manually. This prevents DPI from filtering short ping packets, ensuring stable tunnel connections, especially on mobile networks. How to use Eddie with AmneziaWG To enable AmneziaWG mode, just tap the connection mode available in the main and other views. It will rotate between WireGuard, AmneziaWG and OpenVPN. Set it to AmneziaWG. In its default AmneziaWG mode, Eddie will use all the possible obfuscation, except protocol mimicking, that keeps WireGuard compatibility, thus allowing connections to AirVPN servers. The default settings choice was possible thanks to the invaluable support of persons living in countries where VPN blocks are widespread. Such settings have been tested as working and capable to bypass the current blocking methods in various countries. You may consider to modify them if they are ineffective to bypass "your" specific blocks. In Settings > Advanced, you will find, at the bottom of the page, a new "Custom Amnezia WG directives" item. By tapping it you will summon a dialog that will let you customize any possible AmneziaWG parameter. You can maintain backward compatibility with WireGuard in the dialog WireGuard section, or enable the full AmneziaWG support in the Amnezia section, which is not compatible (at the moment) with AirVPN WireGuard servers. This mode will be mostly valuable in a not distant future, when AirVPN servers will start to support AmneziaWG natively. You may also enable QUIC or DNS mimicking for additional obfuscation efficacy. In order to maintain WireGuard backward compatibility, with or without QUIC or DNS mimicking, you must set: S1 = S2 = 0 Hn ∈ {1, 2, 3, 4} H1 ≠ H2 ≠ H3 ≠ H4 Furthermore, do not exceed the valid limit of the J parameters (anyway Eddie will not let you do it). In this preview version, Eddie's formal control of the input data is based on the following document. We strongly recommend you read it if you need to modify manually parameters: https://github.com/amnezia-vpn/amneziawg-linux-kernel-module?tab=readme-ov-file#configuration Please do not modify In parameters if you don't know exactly what you're doing. Eddie implements QUIC and DNS mimicking and random obfuscation packets for each specific "I" parameter (by using the corresponding "Generate" button). You can enable them with a tap on the proper buttons. You may mimic QUIC and DNS even to connect to WireGuard based servers. When you enable QUIC mimicking and you maintain WireGuard backward compatibility, you add a powerful tool against blocks, because the first packets will be actual QUIC packets. AmneziaWG will fall back to WireGuard compatibility very soon. However, when DPI and SPI tools, and demultiplexers in general, identify the initial QUIC flow, most of them will be unable to detect a WireGuard flow for several minutes. This has been tested thoroughly with deep packet inspection on Linux and FreeBSD based machines by AirVPN staff. Therefore, in different blocking scenarios the QUIC mimicking increases likelihood of successful block bypass. NOTE: the same does not happen with DNS mimicking. In this case DPI / SPI tools identify the stream initially as DNS, but are much quicker (just in a few dozens of packets) to identify the stream as WireGuard's, after the initial DNS identification. If you decide to test, please report at your convenience any bug and problem in this thread. If possible generate a report from the app in a matter of seconds: by tapping the paper plane icon on the Log view bar rightmost side you will generate a full system report which will include both log and logcat and have it sent to our servers. Then you just need to send us the link the app shows you (open a ticket if you prefer to do it in private). Download link, checksum and changelog https://eddie.website/repository/Android/4.0.0-Beta1/EddieAndroid-4.0.0-Beta-1.apk This is a build debug package and side load is mandatory. $ sha256sum EddieAndroid-4.0.0-Beta-1.apk 617269290a0406237646cc0885e5b10f3916252f89fe82ba9ccb947354980fcb EddieAndroid-4.0.0-Beta-1.apk Changelog 4.0.0 (VC 37) - Release date: 26 November 2025 by ProMIND Native Library [ProMIND] updated to version 4.0.0, API 10 [ProMIND] added Amnezia WireGuard API [ProMIND] updated to OpenVPN-AirVPN 3.12 (20251126) AirVPNUser.java [ProMIND] getWireGuardProfile(): added Amnezia support ConnectAirVPNServerFragment.java [ProMIND] showConnectionInfo(): added AmneziaWG logo display [ProMIND] onCreateContextMenu(): added AmneziaWG items [ProMIND] onContextItemSelected(): added AmneziaWG items [ProMIND] added method loadVPNProfile() ConnectVpnProfileFragment.java [ProMIND] added Amnezia support EddieLibraryResult.java [ProMIND] added Amnezia WireGuard API QuickConnectFragment.java [ProMIND] onCreateView(): added AmneziaWG logo display [ProMIND] updateStatusBox(): added AmneziaWG logo display SettingsActivity.java [ProMIND] added "Custom AmneziaWG directives" setting SettingsManager.java [ProMIND] added Amnezia specific settings and methods SupportTools.java [ProMIND] removed method getVPNProfile() VPN.java [ProMIND] added methods enableAmneziaWireGuard() and isWireGuardAmneziaEnabled() VPNManager.java [ProMIND] added method isWireGuardAmneziaEnabled() VPNProfileDatabase.java [ProMIND] added AMNEZIA type WebViewerActivity.java [ProMIND] EddieWebViewClient.shouldOverrideUrlLoading(): it now properly opens android asset files WireGuardClient.java [ProMIND] added WireGuard tunnel node to constructor [ProMIND] added methods for generating Amnezia's junk settings WireGuardTunnel.java [ProMIND] added support for Amnezia WireGuard [ProMIND] added Mode enum [ProMIND] added tunnel node to constructor EddieLibrary.java [ProMIND] added Amnezia WireGuard API Kind regards & datalove AirVPN Staff

Hello! We're very glad to inform you that a new 10 Gbit/s full duplex server located in Los Angeles, California, is available: Revati. The AirVPN client will show automatically the new server; if you use any other OpenVPN or WireGuard client you can generate all the files to access it through our configuration/certificates/key generator (menu "Client Area"->"Config generator"). The server accepts connections on ports 53, 80, 443, 1194, 2018 UDP and TCP for OpenVPN and ports 1637, 47107 and 51820 UDP for WireGuard. Revati supports OpenVPN over SSL and OpenVPN over SSH, TLS 1.3, OpenVPN tls-crypt and WireGuard. Full IPv6 support is included as well. As usual no traffic limits, no logs, no discrimination on protocols and hardened security against various attacks with separate entry and exit-IP addresses. You can check the status as usual in our real time servers monitor , by clicking the server name. Direct link: https://airvpn.org/servers/Revati Do not hesitate to contact us for any information or issue. Kind regards & datalove AirVPN Staff

You are making absolutely zero sense with that comparison. It's 98% of people who don't bother changing profile settings. Which also means, 98% of profiles will be hidden, as the default visibility setting of the profile is Hide for all. Now, you could, of course, change that setting for you yourself, open up to the community, and provide that info, especially to explicitly provide your gender as to foster correct referrals to your person. I sincerely believe, that's what this is all about: Reducing the risk of hurting someone in a conversation. But, let's explore this situation a little. Suppose someone wants to find out how to refer to some other poster around here. First hurdle: 98% of profiles are hidden. Means, one in fifty is open. So the profile is clicked to find out "so, do I say him, do I say them?" and, oh darn, hidden profile. Then that person answers another person, clicks the profile, oh darn, hidden again. And a third, hidden. And a fourth, hidden. That person quickly learns: "Why bother, all the profiles are hidden, anyway", and defaults to "he", "he/she" or "them". Or even "per". So even if you sincerely wanted to do so, correctly referring to another person without the chance of having the necessary info left of every post gets tedious and downright impossible to do with all the profiles being hidden. Hence why the gender info might provide the choices for many genders, but what's the point if no one can look at it? Even if one of those profiles was opened, it doesn't mean all the fields were filled. The probability of finding a correct pronoun for referral gets even lower. As I wrote, we are here for discussions around AirVPN and VPN technology in general (actually, tech support for AirVPN), with some related topics around it. It would be a first for me to find out that gender is important in discussions about VPN tech. You are right that, in the past, I mostly defaulted to the masculine form when referring to any one poster (I prepended a Mr. to every username when referring to that user) but am shifting to @ mentions instead, those are neutral and even cause notifications. That's probably the most scandalous thing in regard to genders one can accuse me of. Homophobia… just really isn't. And, please, do not start the race thing. There is a good, tangible reason to publish pronouns. There is absolutely no reason to publish race, so it's incomparable. A little bit of warning: I will move this discussion to off-topic as, while it refers to the forums software of AirVPN, it does not relate to AirVPN tech directly. Don't think anything bad about the move, it is not an attempt to silence you. Simple moderator chore: Every post to the correct subforum. I am futhermore happy to continue discussing this matter with you (and everyone may join, I might add). But, should your tone of discussion not shift to be more constructive, with less baseless slander against any one person here, I'm putting a warning point on the table. This will come with being put on moderator queue which will see all your posts being screened before publication (as is actually the case right now as you're a new poster). Thank your for your understanding in this matter, and to a good, fruitful discussion. 🍷