Jump to content
Not connected, Your IP: 18.215.159.156
oroboros

Network Lock failure, Eddie 2.13.6

Recommended Posts

I have been using Eddie 2.11.5 (Windows 10, portable, 64bit) for a while now, and Network Lock works fine.
 
I just installed Eddie 2.13.6 (Windows 10, portable, 64bit), and Network Lock no longer works. Instead I get the error message (see attached screenshot):

 

Windows WFP, Add rule failed: App not found: <rule name="NetLock - Allow Eddie" layer="ale_auth_recv_accept_v4" ... etc.

 

Settings on both versions are the same: Mode Automatic, Allow lan/private, Allow ping, no Addresses allowed. I even tried swaping AirVPN.xml files to see if that would work, but it still doesn't.

 

 

Share this post


Link to post

Hello!

 

Then please try the experimental client, as that error looks similar to one which got fixed in 2.14.2.

 

Instructions on where to find it can be found in my signature.


Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please also do not run Tor Exit Servers behind AirVPN, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.


Tired of Windows? Why Linux Is Better.

Share this post


Link to post

I installed Eddie 2.14.2 (Windows10, portable, 64bit), but now get the following error:

 

Cannot login. (curl is required.)

 

... even though, as you can see in the screen shot below, curl.exe is in the folder where it usually is.

 

Logfile

. 2018.03.29 18:59:17 - Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
. 2018.03.29 18:59:17 - Reading options from \\N5550\xxxxx\Internet Downloads\_Security_\AirVPN\airvpn_current\AirVPN.xml
. 2018.03.29 18:59:18 - Command line arguments (0):
. 2018.03.29 18:59:19 - OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
E 2018.03.29 18:59:19 - OpenVPN - Not available
W 2018.03.29 18:59:19 - SSH - Not available
W 2018.03.29 18:59:19 - SSL - Not available
W 2018.03.29 18:59:19 - curl - Not available
W 2018.03.29 18:59:19 - Certification Authorities - Not available
. 2018.03.29 18:59:19 - Updating systems & servers data ...
I 2018.03.29 18:59:19 - Ready
. 2018.03.29 18:59:19 - Cannot retrieve systems & servers data. (curl is required.)
I 2018.03.29 18:59:36 - Checking login ...
F 2018.03.29 18:59:36 - Cannot login. (curl is required.)

Share this post


Link to post

Strange. Did you try un-installing, restart and then going with the installer instead?


Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please also do not run Tor Exit Servers behind AirVPN, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.


Tired of Windows? Why Linux Is Better.

Share this post


Link to post

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'

Share this post


Link to post

 

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'

 

I got that as well. After supplying Staff with the requested solution, you can try what worked for me.

 

The same goes for the OP .


Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please also do not run Tor Exit Servers behind AirVPN, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.


Tired of Windows? Why Linux Is Better.

Share this post


Link to post

I'm using the portable version, from a network drive.

Confirmed bug. Eddie have some issue on network \\ path.

Copy to local disk, or map the network path on a disk letter, or wait a new release that fix this issue.

Thanks for the report.

Share this post


Link to post

Since I had similar problems that I could finally solve: Do you use the Bitdefender engine (any Bitdefender security product, Bullguard, and probably some more)?

 

Once I uninstalled Bitdefender, any error messages I received concerning Eddie went away!

 

Everything works fine with Windows Defender/Firewall or ESET Internet Security or Avast free antivirus + Voodooshield.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...