Network Lock failure, Eddie 2.13.6

[oroboros 0]

I have been using Eddie 2.11.5 (Windows 10, portable, 64bit) for a while now, and Network Lock works fine.
 
I just installed Eddie 2.13.6 (Windows 10, portable, 64bit), and Network Lock no longer works. Instead I get the error message (see attached screenshot):

 

Windows WFP, Add rule failed: App not found: <rule name="NetLock - Allow Eddie" layer="ale_auth_recv_accept_v4" ... etc.

 

Settings on both versions are the same: Mode Automatic, Allow lan/private, Allow ping, no Addresses allowed. I even tried swaping AirVPN.xml files to see if that would work, but it still doesn't.

 

 

[LZ1 672]

Hello!

 

Then please try the experimental client, as that error looks similar to one which got fixed in 2.14.2.

 

Instructions on where to find it can be found in my signature.

[oroboros 0]

I installed Eddie 2.14.2 (Windows10, portable, 64bit), but now get the following error:

 

Cannot login. (curl is required.)

 

... even though, as you can see in the screen shot below, curl.exe is in the folder where it usually is.

 

Logfile

. 2018.03.29 18:59:17 - Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319

. 2018.03.29 18:59:17 - Reading options from \\N5550\xxxxx\Internet Downloads\_Security_\AirVPN\airvpn_current\AirVPN.xml

. 2018.03.29 18:59:18 - Command line arguments (0):

. 2018.03.29 18:59:19 - OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2

E 2018.03.29 18:59:19 - OpenVPN - Not available

W 2018.03.29 18:59:19 - SSH - Not available

W 2018.03.29 18:59:19 - SSL - Not available

W 2018.03.29 18:59:19 - curl - Not available

W 2018.03.29 18:59:19 - Certification Authorities - Not available

. 2018.03.29 18:59:19 - Updating systems & servers data ...

I 2018.03.29 18:59:19 - Ready

. 2018.03.29 18:59:19 - Cannot retrieve systems & servers data. (curl is required.)

I 2018.03.29 18:59:36 - Checking login ...

F 2018.03.29 18:59:36 - Cannot login. (curl is required.)

[LZ1 672]

Strange. Did you try un-installing, restart and then going with the installer instead?

[oroboros 0]

I'm using the portable version, from a network drive. 

 

 

[hugomueller 13]

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'

[Staff 9972]

@hugomueller

 

Hi,

 

can you please publish a full system report as well? "Logs" > click the life belt icon > copy all > paste in the message

 

Kind regards

[LZ1 672]

 

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'

 

I got that as well. After supplying Staff with the requested solution, you can try what worked for me.

 

The same goes for the OP .

[Clodo 176]

I'm using the portable version, from a network drive.

Confirmed bug. Eddie have some issue on network \\ path.

Copy to local disk, or map the network path on a disk letter, or wait a new release that fix this issue.

Thanks for the report.

[MersennePrime 1]

Since I had similar problems that I could finally solve: Do you use the Bitdefender engine (any Bitdefender security product, Bullguard, and probably some more)?

 

Once I uninstalled Bitdefender, any error messages I received concerning Eddie went away!

 

Everything works fine with Windows Defender/Firewall or ESET Internet Security or Avast free antivirus + Voodooshield.