Search the Community

Hi! Why I should use AirVPN over the other VPNs that are out there? I've been thinking about getting AirVPN or Viking VPN I'm currently Using PIA and I'm happy with it but everyone seems to be telling something bad about each provider so I don't know is there any real difference do I use PIA or Air or Viking?

I'll cut right to the chase. AirVpn Doesn't seem to be showing accurate data transfer rates / totals when I use it while playing the MMORPG video game Final Fantasy XIV. Comodo shows it being connected to the tunnel properly, and I also have setup Comodo to immediatly shut down all net traffic in case of disconnection from Airvpn, thus, I can only assume FFXIV is indeed being tunneled properly. The reason I can say for certain that the rates are off, is because they show 0kb-2kb per second, despite the fact my in-game monitor shows sometimes ( usually) over 1.5mbps. So... uhh... What Gives? Is this indicative of a leak? Or is there more at play here than I can see?

I have used AirVPN quite a long time, but recently I noticed something which, in my opinion, need further explanation. When I am disconnected from AirVPN, my firewall is able to pass all the tests on Gibson Research Corporation's site. When I am connected to one of AirVPN servers (it doesn't matter which precisely - my test was proceeded on Linux Ubuntu 13.10 and Windows 8.1), Gibson's report reveals holes in firewall. They are related actually, as I presume, to AirVPN server's firewall, not mine. However, port 88 (Kerberos) is open. Furthermore, system replies to ping. Could you explain, is it deliberate action? Is it safe? Is my security copromised? Can someone obtain unauthorized access to my computer through port 88? I would like to emphasize in the end that my firewall works properly. I use Online Armor and I have tested AirVPN connection with Comodo Firewall as well. Thank you. Please respond. Screenshots are below.

I've readed almost every post in this forum about it and outside too but didn't managed to resolve. The problem is, i select Socks at config on AirVpn; Host : 127.0.0.1; Port 9150, then i start Tor, select the socks5 put the host and port and connect. But when i try to connect the AirVpn (Using TCP) it gives me this error everytime. 20/12/2013 - x:21 Login... 20/12/2013 - x:21 Login success. 20/12/2013 - x:21 Contacting service... 20/12/2013 - x:21 Connecting... 20/12/2013 - x:21 OpenVPN 2.3.2 i686-w64-mingw32 [sSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [iPv6] built on Aug 22 2013 20/12/2013 - x:21 Socket Buffers: R=[8192->8192] S=[8192->8192] 20/12/2013 - x:21 Attempting to establish TCP connection with [AF_INET]127.0.0.1:9150 20/12/2013 - x:21 TCP connection established with [AF_INET]127.0.0.1:9150 20/12/2013 - x:21 socks_handshake: server asked for username/login auth but we were not provided any credentials 20/12/2013 - x:21 SIGTERM[soft,init_instance] received, process exiting 20/12/2013 - x:21 Failed to start.

Hello AirVPN community, I've been lurking a few months, recently subscribed to the service here and am still learning/experimenting with different configurations. This forum btw, is one of the big reasons I decided to go with AirVPN, so kudos to the community and staff for developing a great knowledge base here. On to my question: I'm trying to route traffic from my Virtual box VM out the VPN interface without having to force ALL host traffic out the VPN. My setup: I followed Nadre's wonderful Traffic splitting guide in order to setup utorrent traffic to go out the VPN interface while the rest of my host(windows 7) traffic goes out the regular LAN interface and it's working marvously. My next goal is to run tails in virtual box and route all traffic from that VM out the VPN. The solution i'm looking for has the following goals: Host traffic goes out the non-vpn interface (check)uTorrent traffic goes out the VPN interface (check)Tails VM traffic goes out the VPN interface while maintaing the two above requirements.I've pondered over some way to use the host routing table to accomplish this, but haven't com up with anything. Virtual Box has a NAT bind option, but it is not currently working from what i gathered from the virtual box forums. I did find another post that claims that what i'm looking to do isn't possible but someone did detail a way to do it with a secondary vm acting as a router. While I could do this, i'd rather not put the extra strain on my host for just day to day stuff unless it's absolutely neccessary. Does anyone around here have a better way to accomplish this without the secondary VM? Thanks!

Hello I got a small request for a VPN connection in Taiwan, i hope AirVPN could grand this request soon Best regards Morten

Hi, I'm curious as to why AirVPN DNS servers do not support OpenNIC TLDs, and only seem to recognize ICANN domains even though AirVPN said they no longer recognize ICANN's authority. Any details would be appreciated. Thanks!

Hi all, So recently I've started having issues running qBittorrent and remaining connected to AiVPN. If I connect to AirVPN (through the OpenVPN GUI) and just browse then there is no problem, speeds are good and the connection remains constant. If however I launch qBittorrent and download anything, within 3-4 minutes AirVPN drops. I can think of no explanation as to why this is happening - hence this post. I'm running Windows 8, tunneling through a Uni firewall on TCP 443, I've tried routing qBittorrent over a port explicitly opened in the Forward Ports section of AirVPN and through a randomly generated one, in both cases the results are the same. The only other thing to note is that I have modified the connection script slightly to change my DNS server to 10.5.0.1 (AirVPN's DNS) to prevent DNS leaks however like I say when I'm not running qBittorrent the connection doesn't drop, so I don't think this is the problem. It has only appeared in the last 2 weeks or so, prior to that there were no problems at all and I would quite like to get this fixed. Cheers, H. Log Below: Sat Nov 09 13:12:24 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [iPv6] built on Aug 22 2013Sat Nov 09 13:12:24 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25342Sat Nov 09 13:12:24 2013 Need hold release from management interface, waiting...Sat Nov 09 13:12:25 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25342Sat Nov 09 13:12:25 2013 MANAGEMENT: CMD 'state on'Sat Nov 09 13:12:25 2013 MANAGEMENT: CMD 'log all on'Sat Nov 09 13:12:25 2013 MANAGEMENT: CMD 'hold off'Sat Nov 09 13:12:25 2013 MANAGEMENT: CMD 'hold release'Sat Nov 09 13:12:25 2013 NOTE: the current --script-security setting may allow this configuration to call user-defined scriptsSat Nov 09 13:12:25 2013 Socket Buffers: R=[65536->65536] S=[65536->65536]Sat Nov 09 13:12:25 2013 Attempting to establish TCP connection with [AF_INET]119.81.1.126:443Sat Nov 09 13:12:25 2013 MANAGEMENT: >STATE:1383973945,TCP_CONNECT,,,Sat Nov 09 13:12:25 2013 TCP connection established with [AF_INET]119.81.1.126:443Sat Nov 09 13:12:25 2013 TCPv4_CLIENT link local: [undef]Sat Nov 09 13:12:25 2013 TCPv4_CLIENT link remote: [AF_INET]119.81.1.126:443Sat Nov 09 13:12:25 2013 MANAGEMENT: >STATE:1383973945,WAIT,,,Sat Nov 09 13:12:25 2013 MANAGEMENT: >STATE:1383973945,AUTH,,,Sat Nov 09 13:12:25 2013 TLS: Initial packet from [AF_INET]119.81.1.126:443, sid=01bab8df 8c0287c2Sat Nov 09 13:12:25 2013 VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.orgSat Nov 09 13:12:25 2013 VERIFY OK: nsCertType=SERVERSat Nov 09 13:12:25 2013 VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.orgSat Nov 09 13:12:26 2013 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:12:26 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:12:26 2013 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:12:26 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:12:26 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSASat Nov 09 13:12:26 2013 [server] Peer Connection Initiated with [AF_INET]119.81.1.126:443Sat Nov 09 13:12:27 2013 MANAGEMENT: >STATE:1383973947,GET_CONFIG,,,Sat Nov 09 13:12:28 2013 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)Sat Nov 09 13:12:28 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.5.0.1,comp-lzo no,route 10.5.0.1,topology net30,ping 10,ping-restart 60,ifconfig 10.5.0.230 10.5.0.229'Sat Nov 09 13:12:28 2013 OPTIONS IMPORT: timers and/or timeouts modifiedSat Nov 09 13:12:28 2013 OPTIONS IMPORT: LZO parms modifiedSat Nov 09 13:12:28 2013 OPTIONS IMPORT: --ifconfig/up options modifiedSat Nov 09 13:12:28 2013 OPTIONS IMPORT: route options modifiedSat Nov 09 13:12:28 2013 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modifiedSat Nov 09 13:12:28 2013 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0Sat Nov 09 13:12:28 2013 MANAGEMENT: >STATE:1383973948,ASSIGN_IP,,10.5.0.230,Sat Nov 09 13:12:28 2013 open_tun, tt->ipv6=0Sat Nov 09 13:12:28 2013 TAP-WIN32 device [Local Area Connection] opened: \\.\Global\{2F2AC670-1C48-46EF-84D6-58E32F7205FC}.tapSat Nov 09 13:12:28 2013 TAP-Windows Driver Version 9.9 Sat Nov 09 13:12:28 2013 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.5.0.230/255.255.255.252 on interface {2F2AC670-1C48-46EF-84D6-58E32F7205FC} [DHCP-serv: 10.5.0.229, lease-time: 31536000]Sat Nov 09 13:12:28 2013 Successful ARP Flush on interface [16] {2F2AC670-1C48-46EF-84D6-58E32F7205FC}Sat Nov 09 13:12:28 2013 _up.bat Local Area Connection 1500 1560 10.5.0.230 10.5.0.229 initSat Nov 09 13:12:28 2013 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSat Nov 09 13:12:45 2013 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=upSat Nov 09 13:12:45 2013 C:\Windows\system32\route.exe ADD 119.81.1.126 MASK 255.255.255.255 172.20.167.250Sat Nov 09 13:12:45 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=10 and dwForwardType=4Sat Nov 09 13:12:45 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:12:45 2013 C:\Windows\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:12:45 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:12:45 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:12:45 2013 C:\Windows\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:12:45 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:12:45 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:12:45 2013 MANAGEMENT: >STATE:1383973965,ADD_ROUTES,,,Sat Nov 09 13:12:45 2013 C:\Windows\system32\route.exe ADD 10.5.0.1 MASK 255.255.255.255 10.5.0.229Sat Nov 09 13:12:45 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:12:45 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:12:45 2013 Initialization Sequence CompletedSat Nov 09 13:12:45 2013 MANAGEMENT: >STATE:1383973965,CONNECTED,SUCCESS,10.5.0.230,119.81.1.126 Here is where I turn on qBittorrent (about 13:13:00)Then as you can see at 13:16:52 the connection is reset... Sat Nov 09 13:16:52 2013 Connection reset, restarting [-1]Sat Nov 09 13:16:52 2013 C:\Windows\system32\route.exe DELETE 10.5.0.1 MASK 255.255.255.255 10.5.0.229Sat Nov 09 13:16:52 2013 Route deletion via IPAPI succeeded [adaptive]Sat Nov 09 13:16:52 2013 C:\Windows\system32\route.exe DELETE 119.81.1.126 MASK 255.255.255.255 172.20.167.250Sat Nov 09 13:16:52 2013 Route deletion via IPAPI succeeded [adaptive]Sat Nov 09 13:16:52 2013 C:\Windows\system32\route.exe DELETE 0.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:16:52 2013 Route deletion via IPAPI succeeded [adaptive]Sat Nov 09 13:16:52 2013 C:\Windows\system32\route.exe DELETE 128.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:16:52 2013 Route deletion via IPAPI succeeded [adaptive]Sat Nov 09 13:16:52 2013 Closing TUN/TAP interfaceSat Nov 09 13:16:52 2013 _down.bat Local Area Connection 1500 1560 10.5.0.230 10.5.0.229 initSat Nov 09 13:16:52 2013 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSat Nov 09 13:16:57 2013 SIGUSR1[soft,connection-reset] received, process restartingSat Nov 09 13:16:57 2013 MANAGEMENT: >STATE:1383974217,RECONNECTING,connection-reset,,Sat Nov 09 13:16:57 2013 Restart pause, 5 second(s)Sat Nov 09 13:17:02 2013 NOTE: the current --script-security setting may allow this configuration to call user-defined scriptsSat Nov 09 13:17:02 2013 Socket Buffers: R=[65536->65536] S=[65536->65536]Sat Nov 09 13:17:02 2013 Attempting to establish TCP connection with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:02 2013 MANAGEMENT: >STATE:1383974222,TCP_CONNECT,,,Sat Nov 09 13:17:02 2013 TCP connection established with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:02 2013 TCPv4_CLIENT link local: [undef]Sat Nov 09 13:17:02 2013 TCPv4_CLIENT link remote: [AF_INET]119.81.1.126:443Sat Nov 09 13:17:02 2013 MANAGEMENT: >STATE:1383974222,WAIT,,,Sat Nov 09 13:17:02 2013 MANAGEMENT: >STATE:1383974222,AUTH,,,Sat Nov 09 13:17:02 2013 TLS: Initial packet from [AF_INET]119.81.1.126:443, sid=397dc156 e530db5fSat Nov 09 13:17:02 2013 VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.orgSat Nov 09 13:17:02 2013 VERIFY OK: nsCertType=SERVERSat Nov 09 13:17:02 2013 VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.orgSat Nov 09 13:17:02 2013 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:17:02 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:17:02 2013 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:17:02 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:17:02 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSASat Nov 09 13:17:02 2013 [server] Peer Connection Initiated with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:04 2013 MANAGEMENT: >STATE:1383974224,GET_CONFIG,,,Sat Nov 09 13:17:05 2013 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)Sat Nov 09 13:17:05 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.5.0.1,comp-lzo no,route 10.5.0.1,topology net30,ping 10,ping-restart 60,ifconfig 10.5.0.230 10.5.0.229'Sat Nov 09 13:17:05 2013 OPTIONS IMPORT: timers and/or timeouts modifiedSat Nov 09 13:17:05 2013 OPTIONS IMPORT: LZO parms modifiedSat Nov 09 13:17:05 2013 OPTIONS IMPORT: --ifconfig/up options modifiedSat Nov 09 13:17:05 2013 OPTIONS IMPORT: route options modifiedSat Nov 09 13:17:05 2013 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modifiedSat Nov 09 13:17:05 2013 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0Sat Nov 09 13:17:05 2013 MANAGEMENT: >STATE:1383974225,ASSIGN_IP,,10.5.0.230,Sat Nov 09 13:17:05 2013 open_tun, tt->ipv6=0Sat Nov 09 13:17:05 2013 TAP-WIN32 device [Local Area Connection] opened: \\.\Global\{2F2AC670-1C48-46EF-84D6-58E32F7205FC}.tapSat Nov 09 13:17:05 2013 TAP-Windows Driver Version 9.9 Sat Nov 09 13:17:05 2013 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.5.0.230/255.255.255.252 on interface {2F2AC670-1C48-46EF-84D6-58E32F7205FC} [DHCP-serv: 10.5.0.229, lease-time: 31536000]Sat Nov 09 13:17:05 2013 Successful ARP Flush on interface [16] {2F2AC670-1C48-46EF-84D6-58E32F7205FC}Sat Nov 09 13:17:05 2013 _up.bat Local Area Connection 1500 1560 10.5.0.230 10.5.0.229 initSat Nov 09 13:17:05 2013 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSat Nov 09 13:17:17 2013 MANAGEMENT: CMD 'signal SIGHUP'Sat Nov 09 13:17:17 2013 Closing TUN/TAP interfaceSat Nov 09 13:17:17 2013 _down.bat Local Area Connection 1500 1560 10.5.0.230 10.5.0.229 initSat Nov 09 13:17:17 2013 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSat Nov 09 13:17:21 2013 SIGHUP[hard,] received, process restartingSat Nov 09 13:17:21 2013 MANAGEMENT: >STATE:1383974241,RECONNECTING,SIGHUP,,Sat Nov 09 13:17:21 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [iPv6] built on Aug 22 2013Sat Nov 09 13:17:21 2013 Restart pause, 5 second(s)Sat Nov 09 13:17:26 2013 NOTE: the current --script-security setting may allow this configuration to call user-defined scriptsSat Nov 09 13:17:26 2013 Socket Buffers: R=[65536->65536] S=[65536->65536]Sat Nov 09 13:17:26 2013 Attempting to establish TCP connection with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:26 2013 MANAGEMENT: >STATE:1383974246,TCP_CONNECT,,,Sat Nov 09 13:17:26 2013 TCP connection established with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:26 2013 TCPv4_CLIENT link local: [undef]Sat Nov 09 13:17:26 2013 TCPv4_CLIENT link remote: [AF_INET]119.81.1.126:443Sat Nov 09 13:17:26 2013 MANAGEMENT: >STATE:1383974246,WAIT,,,Sat Nov 09 13:17:26 2013 MANAGEMENT: >STATE:1383974246,AUTH,,,Sat Nov 09 13:17:26 2013 TLS: Initial packet from [AF_INET]119.81.1.126:443, sid=b7f11659 f2c55d2dSat Nov 09 13:17:26 2013 VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.orgSat Nov 09 13:17:26 2013 VERIFY OK: nsCertType=SERVERSat Nov 09 13:17:26 2013 VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.orgSat Nov 09 13:17:27 2013 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:17:27 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:17:27 2013 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySat Nov 09 13:17:27 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSat Nov 09 13:17:27 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSASat Nov 09 13:17:27 2013 [server] Peer Connection Initiated with [AF_INET]119.81.1.126:443Sat Nov 09 13:17:28 2013 MANAGEMENT: >STATE:1383974248,GET_CONFIG,,,Sat Nov 09 13:17:29 2013 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)Sat Nov 09 13:17:29 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.5.0.1,comp-lzo no,route 10.5.0.1,topology net30,ping 10,ping-restart 60,ifconfig 10.5.0.230 10.5.0.229'Sat Nov 09 13:17:29 2013 OPTIONS IMPORT: timers and/or timeouts modifiedSat Nov 09 13:17:29 2013 OPTIONS IMPORT: LZO parms modifiedSat Nov 09 13:17:29 2013 OPTIONS IMPORT: --ifconfig/up options modifiedSat Nov 09 13:17:29 2013 OPTIONS IMPORT: route options modifiedSat Nov 09 13:17:29 2013 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modifiedSat Nov 09 13:17:29 2013 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0Sat Nov 09 13:17:29 2013 MANAGEMENT: >STATE:1383974249,ASSIGN_IP,,10.5.0.230,Sat Nov 09 13:17:29 2013 open_tun, tt->ipv6=0Sat Nov 09 13:17:29 2013 TAP-WIN32 device [Local Area Connection] opened: \\.\Global\{2F2AC670-1C48-46EF-84D6-58E32F7205FC}.tapSat Nov 09 13:17:29 2013 TAP-Windows Driver Version 9.9 Sat Nov 09 13:17:29 2013 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.5.0.230/255.255.255.252 on interface {2F2AC670-1C48-46EF-84D6-58E32F7205FC} [DHCP-serv: 10.5.0.229, lease-time: 31536000]Sat Nov 09 13:17:29 2013 Successful ARP Flush on interface [16] {2F2AC670-1C48-46EF-84D6-58E32F7205FC}Sat Nov 09 13:17:29 2013 _up.bat Local Area Connection 1500 1560 10.5.0.230 10.5.0.229 initSat Nov 09 13:17:29 2013 env_block: add PATH=C:\Windows\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSat Nov 09 13:17:46 2013 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=upSat Nov 09 13:17:46 2013 C:\Windows\system32\route.exe ADD 119.81.1.126 MASK 255.255.255.255 172.20.167.250Sat Nov 09 13:17:46 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=10 and dwForwardType=4Sat Nov 09 13:17:46 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:17:46 2013 C:\Windows\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:17:46 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:17:46 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:17:46 2013 C:\Windows\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.5.0.229Sat Nov 09 13:17:46 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:17:46 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:17:46 2013 MANAGEMENT: >STATE:1383974266,ADD_ROUTES,,,Sat Nov 09 13:17:46 2013 C:\Windows\system32\route.exe ADD 10.5.0.1 MASK 255.255.255.255 10.5.0.229Sat Nov 09 13:17:46 2013 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4Sat Nov 09 13:17:46 2013 Route addition via IPAPI succeeded [adaptive]Sat Nov 09 13:17:46 2013 Initialization Sequence CompletedSat Nov 09 13:17:46 2013 MANAGEMENT: >STATE:1383974266,CONNECTED,SUCCESS,10.5.0.230,119.81.1.126

Hi, I'm having trouble with download speeds through utorrent. without vpn (using the same file as a test) i get approx. 500kB/s with vpn active im getting approx.03 - 3.0kB/s, I've tried all available UK servers, some of which i get no download at all. I'd really appreciate any advise. Thank you.

Hello, i've been using airvpn for over a year now and up until a few days/weeks ago I never had any complaints about the speed. i have a 100mbps connection (speedtest.net is usually showing around 70-80mbps via wifi connection) and when i used to connect to NL Leporis/Lyra servers i would get around 20mbps which was fine for me. lately, i would say since the new NL servers were added, i barely get over 5mbps on any NL servers. which is not really enough to watch HD sports streams... any idea what it could be? let me know if you need anything from my end to better analyze what the problem might be. thanks in advance

I have been using AirVPN for about 5 months and I have a problem I cannot resolve. I play Steam games on the internet, like Left4Dead, and the gaming servers now see me as being in the UK, and try hook me up to servers local to Europe, and not to my home area around Los Angeles. Befor I play, I always quit out of AirVPN. But it seems some setting is left behind in my setup that makes the game servers see me as being in the UK and not in the Los Angeles area. Anyone know how I can fix this? Thanks.

Hello! I am using COMODO but the posts on the forum about its configuration lock too many connections for my needs. I only want to prevent two programs from communicating when I am not connected to AirVPN, i.e. utorrent and jdownloader. To do that, I set the configuration shown in the picture below: Can you confirm that I do not have any kind of leaks for the two programs when I disconnect from the VPN? Am I safe even if the connection to you stops working? I made some tests and the configuration seems to be effective (when I disconnect from you the downloads and uploads just stop), but I'd like to have a confirmation. Kind regards, Pr1nc1p1

Hi All, Sorry for my splurge of posts over the past couple of days, just trying to get my head round all of this! Anyway, I am having some issues when trying to change my IP on Tor. What I have done so far: Generated the config for OpenVPN with my selected country of choice, and have set it to use "Socks" and Port 9150. Successfully loaded that config file into the correct part of the OpenVPN folder. Launch Tor and then navigate to IPChicken to see the IP of the exit node (I think). Connect to the VPN using OpenVPN. Reload the IPChicken page. It shows the same IP address.​What have I missed out? Have I done something wrong? Thanks for any help!

Hi AirVPN Forums, Love The Service!. Ok, Well this is my Enquiry, is there a way to Exclude an IP Address on the router, & put it outside the VPN Connection. for example, My laptop is 192.168.1.8 & Thats happily running within VPN. BUT i want 192.168.1.200 To be Outside of this zone & be able to access the internet with 0 VPN Connection.. So it will show the ISP's Provided IP Address.. Sorry if this question is somewhat vague & Badly Formatted. Thanks. Stan464. More INFO Router: Netgear WNR834B DD/FW: DD-WRT OpenVPN Build. GWIP: 192.168.1.1 ISPGW:192.168.0.1

Greetings, I've searched for forums, but couldn't find a concrete answer. Is it possible to use AirVPN as a proxy server? I'd like to run it, but NOT have it redirect all traffic through air's vpn, only specific browser traffic that I point to it. I'm looking at using Switchy! for chrome, which can route traffic through a proxy based on domain name (or other rules), and am wondering if I can setup AirVPN to be used as the proxy to go through when these rules trigger.

I have just purchased this for port forwarding as i have 2 different computer that I want to use for webhosting and cannot port forward to 2 separate computers. I have installed network-manager-openvpn-gnome on the computer with Ubuntu. I do not have a GUI so the instructions to follow here https://airvpn.org/linux/ do not work. I have created openvpn in my home directory and uploaded the 4 files made in airvpn to here. i restarted openvpn and get the following NO VPN is running. What do I need to do next. I have not set up the port forwarding as yet. Thanks for any help.

Asus RT-N16: DD-WRTBroadcom BCM4716 chip rev 1Clock = 500 MHz (slightly up from factory 480) My bottleneck is at the router while utilizing the DD-WRT OpenVPN Client function. I get a 40% decrease in bandwidth as apposed to using VPN straight from the computer. This is due to limintations of the onboard processor. I use the router because I have just the one VPN account so I have all the computers in the network going through it. I tested the bandwidth with just a single computer connected to assure that it wasn't a network sharing issue. Now I believe my options are: Overclock the hell out of the router. Running some kind of local OpenVPN Server. Purchase a better router. Purchase additional separate monthly VPN accounts I would like to go with 2 because its the cheapest and less risky. Also because I am already running a local tower as SFTP file server and Ubuntu+Debian package archive mirror. Now my knowledge of OpenVPN is limited as is my knowledge of DD-wrt routing functions. Ideally I would like to prevent any and all PlainText traffic. So I think my setup would look roughly like this. Current Configuration: [Computers & Devices] --P--> [Router] --E--> [iSP] --E--> [VPN Provider] --P--> [internet] Proposed Configuration: [Computers & Devices] --P--> [Router] --P--> [Local OpenVPN Server] --E--> [Router] --E--> [iSP] --E--> [VPN Provider] --P--> [internet] P = PlainText E = Encrypted VPN Tunnel

Hi I'm trying to use transparent proxying Tor over VPN on Debian latest x64 and standard OpenVPN client with port 2018 configuration file generated from Air client area. My problem is that I will either be reduced to an intermittent connection or no connection after a few (simultaneous?) requests. I can connect to the VPN, and get a page in the terminal with "wget" or "curl" without problems. If I then open my browser (latest Firefox) and try to load a page, it may load without issues, it may take over a minute to load, or it may not load at all. During this time, the previously working wget and curl, don't work. I also can't resolve hostnames (using Tor's DNSPort). It may start working again a while later, and then I will try to load a site that has a lot of content, and it will stop working again. Maybe it will stop working entirely. The solution is to disconnect from the VPN and reconnect. Nothing is shown in Tor log, VPN log (connecting is normal), or system logs. Another problem is that UDP traffic will still go through. I can connect to a UDP service and the VPN IP is shown, but I want it blocked entirely. My iptables rules, which may be incorrect, I'm not experienced with them: #!/bin/sh iptables -F iptables -t nat -F iptables -t nat -A OUTPUT -m owner --uid-owner 110 -j RETURN iptables -t nat -A OUTPUT -p udp --dport 53 -j REDIRECT --to-ports 53 iptables -t nat -A OUTPUT -d 192.168.0.0/24 -j RETURN iptables -t nat -A OUTPUT ! -o lo -p tcp -m tcp -m owner ! --uid-owner 110 -j REDIRECT --to-ports 9040 iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -m owner --uid-owner 110 -j ACCEPT iptables -A OUTPUT -p icmp -j DROP iptables -A INPUT -p icmp -j DROP iptables -A INPUT -i tun0 -p udp -j RETURN iptables -A OUTPUT -o tun0 -p udp -j RETURN iptables -A INPUT -i lo -p udp -j RETURN iptables -A OUTPUT -o lo -p udp -j RETURN iptables -A INPUT -p udp -s 192.168.0.0/24 -j RETURN iptables -A OUTPUT -p udp -d 192.168.0.0/24 -j RETURN iptables -A INPUT -p udp ! --source-port 2018 -j DROP iptables -A OUTPUT -p udp ! --destination-port 2018 -j DROP ip6tables -F ip6tables -t nat -F ip6tables -A INPUT -j DROP ip6tables -A OUTPUT -j DROP Thanks in advance.

Hello all, I am currently connected to Air vpn, then running a virtual machine. I am also running tor on the vm, but I am not sure if the traffic from tor is being routed through my vpn...any input is so very much appreciated..I am at a loss for tech skills here. Thank you all.