Leaderboard

NOTICE to the Moderator: PLEASE MOVE TO THE RIGHT FORUM Hello, I want to make a thread about split tunneling through a spezific user. I figured out how it works and want to share it. I use Debian 8/9 but it should work with other distros too. Openvpn Split tunnel though user Debian 8 & 9 based Install openvpn from apt or install it via source apt-get update -y && apt-get upgrade -y && apt-get install openvpn htop nload dstat sudo apt-utils iptables curl resolvconf -y nano /etc/systemd/system/openvpn@openvpn.service Config: [Unit] Description=OpenVPN connection to %i Documentation=man:openvpn(8) Documentation=https://community.openvpn.net/openvpn/wiki/Openvpn23ManPage Documentation=https://community.openvpn.net/openvpn/wiki/HOWTO After=network.target [Service] RuntimeDirectory=openvpn PrivateTmp=true KillMode=mixed Type=forking ExecStart=/usr/sbin/openvpn --daemon ovpn-%i --status /run/openvpn/%i.status 10 --cd /etc/openvpn --script-security 2 --config /etc/openvpn/%i.conf --writepid /run/openvpn/%i.pid PIDFile=/run/openvpn/%i.pid ExecReload=/bin/kill -HUP $MAINPID WorkingDirectory=/etc/openvpn Restart=on-failure RestartSec=3 ProtectSystem=yes LimitNPROC=10 DeviceAllow=/dev/null rw DeviceAllow=/dev/net/tun rw [Install] WantedBy=multi-user.target Enable Service systemctl enable openvpn@openvpn.service Download Airvpn/Openvpn config and paste it in there: nano /etc/openvpn/openvpn.conf Add this to the config: nobind script-security 2 route-noexec up /etc/openvpn/iptables.sh down /etc/openvpn/update-resolv-conf Change DNS nano /etc/openvpn/update-resolv-conf foreign_option_1='dhcp-option DNS AIRVPN DNS1' foreign_option_2='dhcp-option DNS AIRVPN DNS2' foreign_option_3='dhcp-option DNS 1.1.1.1' Add user and group adduser --disabled-login vpn usermod -aG vpn XXX usermod -aG XXX vpn Iptables Flush & Rules iptables -F iptables -A OUTPUT ! -o lo -m owner --uid-owner vpn -j DROP apt-get install iptables-persistent -y nano /etc/openvpn/iptables.sh Change INTERFACE, VPNUSER, LOCALIP and NETIF Script: #! /bin/bash export INTERFACE="tun0" export VPNUSER="vpn" export LOCALIP="192.168.1.130" export NETIF="eth0" # flushes all the iptables rules, if you have other rules to use then add them into the script iptables -F -t nat iptables -F -t mangle iptables -F -t filter # mark packets from $VPNUSER iptables -t mangle -A OUTPUT -j CONNMARK --restore-mark iptables -t mangle -A OUTPUT ! --dest $LOCALIP -m owner --uid-owner $VPNUSER -j MARK --set-mark 0x1 iptables -t mangle -A OUTPUT --dest $LOCALIP -p udp --dport 53 -m owner --uid-owner $VPNUSER -j MARK --set-mark 0x1 iptables -t mangle -A OUTPUT --dest $LOCALIP -p tcp --dport 53 -m owner --uid-owner $VPNUSER -j MARK --set-mark 0x1 iptables -t mangle -A OUTPUT ! --src $LOCALIP -j MARK --set-mark 0x1 iptables -t mangle -A OUTPUT -j CONNMARK --save-mark # allow responses iptables -A INPUT -i $INTERFACE -m conntrack --ctstate ESTABLISHED -j ACCEPT # block everything incoming on $INTERFACE to prevent accidental exposing of ports iptables -A INPUT -i $INTERFACE -j REJECT # let $VPNUSER access lo and $INTERFACE iptables -A OUTPUT -o lo -m owner --uid-owner $VPNUSER -j ACCEPT iptables -A OUTPUT -o $INTERFACE -m owner --uid-owner $VPNUSER -j ACCEPT # all packets on $INTERFACE needs to be masqueraded iptables -t nat -A POSTROUTING -o $INTERFACE -j MASQUERADE # reject connections from predator IP going over $NETIF iptables -A OUTPUT ! --src $LOCALIP -o $NETIF -j REJECT # Start routing script /etc/openvpn/routing.sh exit 0 chmod +x /etc/openvpn/iptables.sh nano /etc/openvpn/routing.sh Change ifconfig to ip if your OS dont support ifconfig anymore or install it. apt install net-tools Change VPNIG and VPNUSER if needed Script: #! /bin/bash VPNIF="tun0" VPNUSER="vpn" GATEWAYIP=`ifconfig $VPNIF | egrep -o '([0-9]{1,3}\.){3}[0-9]{1,3}' | egrep -v '255|(127\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3})' | tail -n1` if [[ `ip rule list | grep -c 0x1` == 0 ]]; then ip rule add from all fwmark 0x1 lookup $VPNUSER fi ip route replace default via $GATEWAYIP table $VPNUSER ip route append default via 127.0.0.1 dev lo table $VPNUSER ip route flush cache # run update-resolv-conf script to set VPN DNS /etc/openvpn/update-resolv-conf exit 0 chmod +x /etc/openvpn/routing.sh nano /etc/iproute2/rt_tables Add 200 vpn Edit vpn filter nano /etc/sysctl.d/9999-vpn.conf Add: Replace XXXXXX with your eth/wireless interface net.ipv4.conf.all.rp_filter = 2 net.ipv4.conf.default.rp_filter = 2 net.ipv4.conf.XXXXXX.rp_filter = 2 net.ipv6.conf.all.rp_filter = 2 net.ipv6.conf.default.rp_filter = 2 net.ipv6.conf.XXXXXX.rp_filter = 2 Apply Rules and show status sysctl --system service openvpn status Test it IP: sudo -u vpn -i -- curl ipinfo.io DNS: sudo -u vpn -i -- cat /etc/resolv.conf Enjoy

Are you aware that you are using beta version? We all have problems and are testing experimental version. Patience is a key here, together with providing as much bug details as possible. It doesn't matter the version. They ALL do the same thing. I think I'll switch to another vpn. This is too frustrating for me going through the same damn thing over and over and over again.