Wireguard, how *not* to route all traffic through the VPN and also forward ports?

[Alonzo 0]

Hi,

I'm trying to setup wireguard in a way that only applications i set to use the wg's interface will route its traffic through the VPN, with port forwarding enabled. I was under the impression that something like the following should work, but it doesn't:
 

[Interface]
Address = 10.184.118.49
PrivateKey = [redacted]
MTU = 1320
DNS = 9.9.9.9

[Peer]
PublicKey = [redacted]
PresharedKey = [redacted]
Endpoint = ip:port
AllowedIPs = 10.184.118.0/24
PersistentKeepalive = 15

If I set the AllowedIPs to 0.0.0.0/0 then I can port forward, but all my traffic is routed over the VPN, and I don't want that. Is something like this possible with AirVPN?


Thank you,
Alonzo