Jump to content
Not connected, Your IP: 3.94.202.6
wuffles

ANSWERED DD-WRT router behind DSL Router not connecting?

Recommended Posts

Actually, was connected to the wrong router then. Here's the result after I connected.

 

State
Server: : Local Address: Remote Address: Client: WAIT: Local Address: Remote Address:

Status

Log
Serverlog Clientlog 19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'log 500'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:23 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:24 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:25 NOTE: --mute triggered...
19700101 00:01:20 18 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:20 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:20 Restart pause 2 second(s)
19700101 00:01:22 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:22 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:22 I UDPv4 link local: [undef]
19700101 00:01:22 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:22 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=597d735e 85520f64
19700101 00:01:23 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:01:23 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:01:23 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:01:23 NOTE: --mute triggered...
19700101 00:01:23 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:23 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:23 Restart pause 2 second(s)
19700101 00:01:25 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:25 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:25 I UDPv4 link local: [undef]
19700101 00:01:25 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:25 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:25 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=366b96f2 f3713fe0
19700101 00:01:25 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:01:25 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:01:25 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:01:25 NOTE: --mute triggered...
19700101 00:01:25 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:25 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:25 Restart pause 2 second(s)
19700101 00:01:27 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:27 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:27 I UDPv4 link local: [undef]
19700101 00:01:27 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:28 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_ACK_V1)
19700101 00:01:29 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:29 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:29 NOTE: --mute triggered...
19700101 00:02:27 25 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:27 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:27 Restart pause 2 second(s)
19700101 00:02:29 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:29 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:29 I UDPv4 link local: [undef]
19700101 00:02:29 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:30 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=2a091fe0 f3042222
19700101 00:02:30 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:02:30 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:02:30 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:02:30 NOTE: --mute triggered...
19700101 00:02:30 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:30 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:30 Restart pause 2 second(s)
19700101 00:02:32 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:32 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:32 I UDPv4 link local: [undef]
19700101 00:02:32 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:32 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:32 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=951028e3 82d050a6
19700101 00:02:33 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:02:33 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:02:33 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:02:33 NOTE: --mute triggered...
19700101 00:02:33 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:33 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:33 Restart pause 2 second(s)
19700101 00:02:35 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:35 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:35 I UDPv4 link local: [undef]
19700101 00:02:35 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:35 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:36 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:36 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:37 NOTE: --mute triggered...
19700101 00:03:06 21 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'log 500'
19700101 00:00:00 

Share this post


Link to post

you paste in ca in ca cert

Cert in public Client

Key in private Client key

 

Right?

Share this post


Link to post

Hello,

 

the logs are quite clear:

19700101 00:01:23 N VERIFY ERROR: depth=1 error=certificate is not yet valid

 

We confirm that on Jan 1, 1970, our certificate is not valid.

 

Kind regards

Share this post


Link to post

So, I updated the ntp server, rebooted the router, and it won't come back onto the network either wirelessly or via a wire. Am going to go through the restore factory reset from the button on the back and try it all over again.

Share this post


Link to post

I can't actually factory reset it anyway. No idea what happened there but it's not looking like it's going to come back on again.

Share this post


Link to post

You try the correct ip? I think ddwrt Standard Setup use 192.168.1.1 give your pc 192.168.1.2 or something

Share this post


Link to post

Factory reset leaves dhcp enabled and wifi on too, neither of which are. I'll try an ip in that range.

 

After I changed the ntp and rebooted it the wifi never came up.

Share this post


Link to post

Nope. Nothing. How do you get this back to anything usable do you think? Model is WNR 2000v2

Share this post


Link to post

Found over Google:

To do a factory reset of the router, clearing out all of the settings that have been made, simply take a paperclip to push and hold the small hole to the left on the back of the router that's marked "Reset", until the Power LED on the front starts blinking. Then let go and wait for the Power LED to become stable/solid again. Now you can reinstall the router.

Share this post


Link to post

Yes, I'd already tried that. Doesn't work.

 

So, I updated the ntp server, rebooted the router, and it won't come back onto the network either wirelessly or via a wire. Am going to go through the restore factory reset from the button on the back and try it all over again.

Share this post


Link to post

4th time is a charm on the reset button obviously. Back in a mo, I need to find out what state this thing is in.

Share this post


Link to post

Success, I think. Well, it's connected, so it was a simple case of 1. forgot to add a cert, 2. forgot to add an ntp server after the factory reset, 3. broke it completely and 4. unbroke it and reset it up again.

 

So, now I know it works I can take out the subscription, and with just 15 mins of life left in th 3 day trial too.

 

Do I just use the firmware update facility through the GUI? In which case is there a specific thing I should be looking for on the DD-WRT site. Presumably just seach for the correct model and take it from there?

 

Thanks for your help DJ77.

Share this post


Link to post

I spoke too soon. It was a fluke. It's not reconnecting through OpenVPN again now, and nothing showing in the log at all either. Don't think I changed anything at all, just went away and came back to the computers to find it not working.

 

So how can I force a connection do you think so I can see the logs?

Share this post


Link to post

Try Upgrade maybe something is wrong with the firmware

 

Administration tab / Firmware Upgrade select After Upgrade reset to default Settings

Chose Firmware and Start Router reboot of its finished

Share this post


Link to post

? What you have now for a router ? Not the r7000? Your Link is about wnr2000

 

My Link is for r7000

Share this post


Link to post

Nope. Nothing. How do you get this back to anything usable do you think? Model is WNR 2000v2

 

I've not said it was an R7000, you did kind of mention that model number before but I assumed (as with many Netgear cr@p) it has a few names.

 

It's always been a WNR2000v2

Share this post


Link to post

Oh then sorry lol i think i read Here r7000 my Bad less sleep

Share this post


Link to post

No it's cool. So, I think the newest firmware is the one I have. I may go about getting hold of a newer router once I know this all works. Is there a preferred model these days?

 

I have a number of access points around the property all feeding into the TP Link router which is the DSL router, and it all gets a bit funny when things change.

Share this post


Link to post

Right on. Well, I'll stick with this £25 off eBay one for a bit now it appears settled.

 

Do you mind me picking your brains on how to point various clients (wired and wireless) through the VPN? Which btw is still working even though it was supposed to run out of free trial at 6pm. Oh well.

Share this post


Link to post

Policy based routing there you can add 1 Device ip per line which should use vpn the Rest use your isp

 

But im not sure if it works on your Old Firmware Check ipleak After adding

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...