Jump to content


Photo

DD-WRT router behind DSL Router not connecting?


Best Answer wuffles, 24 July 2015 - 04:46 PM

Success, I think. Well, it's connected, so it was a simple case of 1. forgot to add a cert, 2. forgot to add an ntp server after the factory reset, 3. broke it completely and 4. unbroke it and reset it up again.

 

So, now I know it works I can take out the subscription, and with just 15 mins of life left in th 3 day trial too.

 

Do I just use the firmware update facility through the GUI? In which case is there a specific thing I should be looking for on the DD-WRT site. Presumably just seach for the correct model and take it from there?

 

Thanks for your help DJ77.

Go to the full post


  • Please log in to reply
50 replies to this topic

#21 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 10:50 AM

Administration tab them Factory default tab

Then Setup wlan password / save&apply

Basic Setup Page: save&apply
static dns1: 8.8.8.8
static dns2: 8.8.4.4
static dns3: 10.0.0.0

Openvpn Setup save&apply

Reboot router

 

Just to clarify (and I am about to be dragged out to lunch). You say to set the static dns to these IPs

 

I mean Setup openvpn like on the Tutorial Page https://airvpn.org/ddwrt/

But on Basic Setup dont change anything like fixed ip only statistic dns 1-3

 

Then say to change the static dns IPs here.

 

Which do you have set?
 



#22 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 10:56 AM

No only on Basic Setup you change the static ips then you Setup openvpn your Firmware is very Old a Update Would be better but try now openvpn first

#23 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 11:03 AM

I clearly missed one of the certs when I set it up before, it's attempting to connect now as there's something appearing in logs. Airvpn still doesn't seem to think I am connected but may need to reconfigure some routing.

 

I ran the IPtables commands as per the instructions too.

 

Am being dragged out to lunch now, back in about an hour or so. Thanks for your perseverance, I think we might be getting somewhere.

 

Log is below:

 

Serverlog Clientlog 19700101 00:28:43 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:28:43 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:28:43 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_ACK_V1)
19700101 00:28:44 NOTE: --mute triggered...
19700101 00:29:34 22 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:29:34 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:29:34 D MANAGEMENT: CMD 'state'
19700101 00:29:34 MANAGEMENT: Client disconnected
19700101 00:29:34 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:29:34 D MANAGEMENT: CMD 'state'
19700101 00:29:34 MANAGEMENT: Client disconnected
19700101 00:29:34 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:29:34 D MANAGEMENT: CMD 'state'
19700101 00:29:34 MANAGEMENT: Client disconnected
19700101 00:29:34 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:29:34 D MANAGEMENT: CMD 'log 500'
19700101 00:29:34 MANAGEMENT: Client disconnected
19700101 00:29:43 N TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
19700101 00:29:43 N TLS Error: TLS handshake failed
19700101 00:29:43 I SIGUSR1[soft tls-error] received process restarting
19700101 00:29:43 Restart pause 2 second(s)
19700101 00:29:45 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:29:45 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:29:45 I UDPv4 link local: [undef]
19700101 00:29:45 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:29:45 TLS: Initial packet from [AF_INET]213.152.161.73:443 sid=fc2dc714 fd58c2f2
19700101 00:29:45 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:29:45 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:29:45 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:29:45 NOTE: --mute triggered...
19700101 00:29:45 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:29:45 I SIGUSR1[soft tls-error] received process restarting
19700101 00:29:45 Restart pause 2 second(s)
19700101 00:29:47 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:29:47 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:29:47 I UDPv4 link local: [undef]
19700101 00:29:47 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:29:47 TLS: Initial packet from [AF_INET]213.152.161.73:443 sid=3b07a49b d33ad347
19700101 00:29:48 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:29:48 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:29:48 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:29:48 NOTE: --mute triggered...
19700101 00:29:48 2 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:29:48 I SIGUSR1[soft tls-error] received process restarting
19700101 00:29:48 Restart pause 2 second(s)
19700101 00:29:50 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:29:50 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:29:50 I UDPv4 link local: [undef]
19700101 00:29:50 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:29:50 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_ACK_V1)
19700101 00:29:52 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:29:52 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:29:52 NOTE: --mute triggered...
19700101 00:30:51 22 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:30:51 I SIGUSR1[soft tls-error] received process restarting
19700101 00:30:51 Restart pause 2 second(s)
19700101 00:30:53 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:30:53 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:30:53 I UDPv4 link local: [undef]
19700101 00:30:53 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:30:53 TLS: Initial packet from [AF_INET]213.152.161.73:443 sid=6d7d0486 145fca54
19700101 00:30:53 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:30:53 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:30:53 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:30:53 NOTE: --mute triggered...
19700101 00:30:53 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:30:53 I SIGUSR1[soft tls-error] received process restarting
19700101 00:30:53 Restart pause 2 second(s)
19700101 00:30:55 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:30:55 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:30:55 I UDPv4 link local: [undef]
19700101 00:30:55 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:30:55 TLS: Initial packet from [AF_INET]213.152.161.73:443 sid=12d8e03d 23fdef7d
19700101 00:30:55 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:30:55 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:30:55 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:30:55 NOTE: --mute triggered...
19700101 00:30:55 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:30:55 I SIGUSR1[soft tls-error] received process restarting
19700101 00:30:55 Restart pause 2 second(s)
19700101 00:30:57 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:30:57 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:30:57 I UDPv4 link local: [undef]
19700101 00:30:57 I UDPv4 link remote: [AF_INET]213.152.161.73:443
19700101 00:30:57 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:30:57 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_ACK_V1)
19700101 00:30:58 N TLS Error: Unroutable control packet received from [AF_INET]213.152.161.73:443 (si=3 op=P_CONTROL_V1)
19700101 00:30:58 NOTE: --mute triggered...
19700101 00:31:50 24 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:31:50 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:31:50 D MANAGEMENT: CMD 'state'
19700101 00:31:50 MANAGEMENT: Client disconnected
19700101 00:31:50 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:31:50 D MANAGEMENT: CMD 'state'
19700101 00:31:51 MANAGEMENT: Client disconnected
19700101 00:31:51 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:31:51 D MANAGEMENT: CMD 'state'
19700101 00:31:51 MANAGEMENT: Client disconnected
19700101 00:31:51 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:31:51 D MANAGEMENT: CMD 'log 500'
19700101 00:00:00 


#24 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 11:28 AM

Tls cyper aes128?

All certs Start with ---Begin--- ?

#25 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 02:48 PM

Yes and yes (now) although instructions don't say that.

 

State
Server: : Local Address: Remote Address: Client: WAIT: Local Address: Remote Address:

Status

Log
Serverlog Clientlog 19700101 00:00:06 I OpenVPN 2.3.0 mipsel-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Mar 25 2013
19700101 00:00:06 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:16
19700101 00:00:06 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:00:07 W WARNING: file '/tmp/openvpncl/client.key' is group or others accessible
19700101 00:00:07 W WARNING: file '/tmp/openvpncl/ta.key' is group or others accessible
19700101 00:00:07 I Control Channel Authentication: using '/tmp/openvpncl/ta.key' as a OpenVPN static key file
19700101 00:00:07 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
19700101 00:00:07 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
19700101 00:00:07 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:00:07 I UDPv4 link local: [undef]
19700101 00:00:07 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:00:15 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=504aabe6 1eae679c
19700101 00:00:16 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:00:16 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:00:16 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:00:16 NOTE: --mute triggered...
19700101 00:00:16 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:00:16 I SIGUSR1[soft tls-error] received process restarting
19700101 00:00:16 Restart pause 2 second(s)
19700101 00:00:18 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:00:18 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:00:18 I UDPv4 link local: [undef]
19700101 00:00:18 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:00:18 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:18 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=a880ecc1 da64a482
19700101 00:00:18 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:00:18 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:00:18 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:00:18 NOTE: --mute triggered...
19700101 00:00:18 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:00:18 I SIGUSR1[soft tls-error] received process restarting
19700101 00:00:18 Restart pause 2 second(s)
19700101 00:00:20 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:00:20 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:00:20 I UDPv4 link local: [undef]
19700101 00:00:20 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:00:20 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:20 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_ACK_V1)
19700101 00:00:21 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:22 NOTE: --mute triggered...
19700101 00:00:23 3 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'log 500'
19700101 00:00:00 


#26 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 02:51 PM

Actually, was connected to the wrong router then. Here's the result after I connected.

 

State
Server: : Local Address: Remote Address: Client: WAIT: Local Address: Remote Address:

Status

Log
Serverlog Clientlog 19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'state'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:00:23 D MANAGEMENT: CMD 'log 500'
19700101 00:00:23 MANAGEMENT: Client disconnected
19700101 00:00:23 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:23 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:24 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:00:25 NOTE: --mute triggered...
19700101 00:01:20 18 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:20 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:20 Restart pause 2 second(s)
19700101 00:01:22 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:22 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:22 I UDPv4 link local: [undef]
19700101 00:01:22 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:22 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=597d735e 85520f64
19700101 00:01:23 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:01:23 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:01:23 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:01:23 NOTE: --mute triggered...
19700101 00:01:23 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:23 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:23 Restart pause 2 second(s)
19700101 00:01:25 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:25 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:25 I UDPv4 link local: [undef]
19700101 00:01:25 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:25 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:25 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=366b96f2 f3713fe0
19700101 00:01:25 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:01:25 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:01:25 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:01:25 NOTE: --mute triggered...
19700101 00:01:25 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:01:25 I SIGUSR1[soft tls-error] received process restarting
19700101 00:01:25 Restart pause 2 second(s)
19700101 00:01:27 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:01:27 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:01:27 I UDPv4 link local: [undef]
19700101 00:01:27 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:01:28 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_ACK_V1)
19700101 00:01:29 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:29 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:01:29 NOTE: --mute triggered...
19700101 00:02:27 25 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:27 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:27 Restart pause 2 second(s)
19700101 00:02:29 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:29 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:29 I UDPv4 link local: [undef]
19700101 00:02:29 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:30 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=2a091fe0 f3042222
19700101 00:02:30 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:02:30 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:02:30 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:02:30 NOTE: --mute triggered...
19700101 00:02:30 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:30 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:30 Restart pause 2 second(s)
19700101 00:02:32 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:32 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:32 I UDPv4 link local: [undef]
19700101 00:02:32 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:32 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:32 TLS: Initial packet from [AF_INET]62.102.148.132:443 sid=951028e3 82d050a6
19700101 00:02:33 N VERIFY ERROR: depth=1 error=certificate is not yet valid: C=IT ST=IT L=Perugia O=airvpn.org CN=airvpn.org CA emailAddress=info@airvpn.org
19700101 00:02:33 N TLS_ERROR: BIO read tls_read_plaintext error: error:14090086:lib(20):func(144):reason(134)
19700101 00:02:33 N TLS Error: TLS object -> incoming plaintext read error
19700101 00:02:33 NOTE: --mute triggered...
19700101 00:02:33 1 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:02:33 I SIGUSR1[soft tls-error] received process restarting
19700101 00:02:33 Restart pause 2 second(s)
19700101 00:02:35 W NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
19700101 00:02:35 Socket Buffers: R=[114688->131072] S=[114688->131072]
19700101 00:02:35 I UDPv4 link local: [undef]
19700101 00:02:35 I UDPv4 link remote: [AF_INET]62.102.148.132:443
19700101 00:02:35 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:36 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:36 N TLS Error: Unroutable control packet received from [AF_INET]62.102.148.132:443 (si=3 op=P_CONTROL_V1)
19700101 00:02:37 NOTE: --mute triggered...
19700101 00:03:06 21 variation(s) on previous 3 message(s) suppressed by --mute
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'state'
19700101 00:03:06 MANAGEMENT: Client disconnected
19700101 00:03:06 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:16
19700101 00:03:06 D MANAGEMENT: CMD 'log 500'
19700101 00:00:00 


#27 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 03:01 PM

you paste in ca in ca cert
Cert in public Client
Key in private Client key

Right?

#28 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 03:02 PM

Your Router Time is correct too?

#29 Staff

Staff

    Advanced Member

  • Staff
  • PipPipPip
  • 7792 posts

Posted 24 July 2015 - 03:02 PM

Hello,

 

the logs are quite clear:

19700101 00:01:23 N VERIFY ERROR: depth=1 error=certificate is not yet valid

 

We confirm that on Jan 1, 1970, our certificate is not valid.

 

Kind regards



#30 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 03:30 PM

So, I updated the ntp server, rebooted the router, and it won't come back onto the network either wirelessly or via a wire. Am going to go through the restore factory reset from the button on the back and try it all over again.



#31 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 03:33 PM

Dont forget to reboot Router After setup

#32 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 03:40 PM

I can't actually factory reset it anyway. No idea what happened there but it's not looking like it's going to come back on again.



#33 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 03:47 PM

You try the correct ip? I think ddwrt Standard Setup use 192.168.1.1 give your pc 192.168.1.2 or something

#34 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 03:50 PM

Factory reset leaves dhcp enabled and wifi on too, neither of which are. I'll try an ip in that range.

 

After I changed the ntp and rebooted it the wifi never came up.



#35 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 03:53 PM

Nope. Nothing. How do you get this back to anything usable do you think? Model is WNR 2000v2



#36 dj77

dj77

    Advanced Member

  • Members
  • PipPipPip
  • 117 posts

Posted 24 July 2015 - 03:53 PM

Found over Google:
To do a factory reset of the router, clearing out all of the settings that have been made, simply take a paperclip to push and hold the small hole to the left on the back of the router that's marked "Reset", until the Power LED on the front starts blinking. Then let go and wait for the Power LED to become stable/solid again. Now you can reinstall the router.

#37 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 04:01 PM

Yes, I'd already tried that. Doesn't work.

 

So, I updated the ntp server, rebooted the router, and it won't come back onto the network either wirelessly or via a wire. Am going to go through the restore factory reset from the button on the back and try it all over again.



#38 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 04:04 PM

4th time is a charm on the reset button obviously. Back in a mo, I need to find out what state this thing is in.



#39 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 04:46 PM   Best Answer

Success, I think. Well, it's connected, so it was a simple case of 1. forgot to add a cert, 2. forgot to add an ntp server after the factory reset, 3. broke it completely and 4. unbroke it and reset it up again.

 

So, now I know it works I can take out the subscription, and with just 15 mins of life left in th 3 day trial too.

 

Do I just use the firmware update facility through the GUI? In which case is there a specific thing I should be looking for on the DD-WRT site. Presumably just seach for the correct model and take it from there?

 

Thanks for your help DJ77.



#40 wuffles

wuffles

    Advanced Member

  • Members
  • PipPipPip
  • 32 posts

Posted 24 July 2015 - 05:51 PM

I spoke too soon. It was a fluke. It's not reconnecting through OpenVPN again now, and nothing showing in the log at all either. Don't think I changed anything at all, just went away and came back to the computers to find it not working.

 

So how can I force a connection do you think so I can see the logs?







Similar Topics Collapse

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Servers online. Online Sessions: 15731 - BW: 55202 Mbit/sYour IP: 54.90.204.233Guest Access.