Search the Community

Hello, Can I connect to airvpn with ssh, and use it to just route one airvpn forwarded port to a local port? For instance, external port 38573 to local port 80. I need to make sure my entire system won’t be tunneled. It’s sole purpose would be to route between the ports. I’ve done something similar with a vps but I don’t know if I can do it with airvpn. thanks!

hi i accidently pressed to not allow the map to geolocate me months ago , to this day ipleak.net always says user denied the request to geolocate ! how do i change this to allow it to locate me ? thanks

Hi, I am always getting this error when I SSH into my Raspberry Pi and try to do stuff with Goldcrest. I have already added "Jack" to the AirVPN group. But it still doesnt work, same error. jack@jack ~ $ goldcrest --disconnect Goldcrest - AirVPN Bluetit Client 1.3.0 - 1 June 2023 2023-11-24 17:00:26 Reading run control directives from file /home/jack/.config/goldcrest.rc 2023-11-24 17:00:26 DBusConnectorException: DBusConnector: not primary owner (2) Any ideas?

Basically just what the title is. It took the money out of my account, then it said "pending" which it never has before, so I clicked cancel. Now I feel like my money is in limbo... : |

Is it possible to set up Foxy Proxy or something similar using AirVPN? If so, how exactly? Notably, I'm wondering about GNU+Linux (Ubuntu) and Brave and Firefox. Particularly, I want certain browser profiles to use a proxy while the OS connects via OpenVPN CLI / Eddie.

Hi, I'm on a mobile data plan that offers unlimited youtube but limited on everything else. I was wondering. Is there a way to fake my airvpn encrypted data to look like it was youtube data passing through and not something else? I don't think they can look at the packet contents of youtube since it's also encrypted with HTTPS. yeah I don't know shit, any thoughts?

Source: https://www.bleepingcomputer.com/news/security/voracle-attack-can-recover-http-data-from-vpn-connections/ Hello everyone, I've recently read that article above about this new attack called VORACLE that can possibly allow an attacker to recover data from HTTP traffic sent through a VPN. I've searched these forums for anything mentioning voracle but no results so I'm starting this topic out of interest and concern, and some questions for AirVPN staff. Is AirVPN completely protected from this new attack? Or is this something that AirVPN needs to *address and what can/will be done, if not why? What can AirVPN users do against this if anything or what are the exact steps to configure inside Eddie if anything? (*With the above quote in-mind does AirVPN need to do the same for its service?) Appreciate any replies and interest in the matter. Thanks.

will using DNScrypt limit what information my ISP sees about what i do online? will it stop my ISP from being able to see what websites i connect to? is there a reason to use airVPNs DNS? will using DNScrypt with airVPN compromise my connection in any way? will airVPN ever offer an encrypted DNS, is that something you guys are thinking about and how hard would it be for you to implement? sorry if these questions are dumb, i'm pretty new to this stuff ^-^'! i love airVPN by the way, and i really love your eddie client on linux!

Would it improve security if airvpn uses LibreSSL to build the openvpn binary? https://www.libressl.org/

Hi, this is my first day as a paying customer here at AirVPN so I guess this qualifies as a newbie question. Q: What is the easiest way of using airvpn with network lock, and still being able to access the computer from other devices on the LAN? Background: I`ve got an old macbook setup with a torrent client, and a plex server to serve the goodies to various devices on my LAN. I`ve installed the AirVPN client on this machine now and I`m very happy with both the speeds I`m getting - and how connectable I am. (I just switched from BTguard - and it`s a BIG difference). However I can`t seem to connect to the machine from other devices on my LAN anymore, not with PLEX, and not with "remote screen sharing" in os-x. What have I tried: After reading some posts here at the forum I`ve tried to setup my LAN in "Routes" under "preferences" - and specified that all traffic on my LAN goes outside of the VPN tunnel. I`m a bit new to "CIDR ranges" - but what I`ve entered there now is 192.168.10.0/255.255.255.0. Does that cover it, or is there a better way to do it? What I have not tried: I`ve not yet tried to edit the "/etc/pf.conf"-file or use another external software like tunnelblick. But if this is the only way of achieving what I want, I can give that a go too. I`m guessing I`m not the first guy having this problem, and even if I have`nt found the right answer to the question here on the forum - the answer must be out there. So if anybody could point me in the right direction, I`d really appreciate it! Have a great day everybody! best regards Olav

What do you think about IVPN encryption, amount of servers, policies and any other comments about three servce. Here is the encryption they use, I got this information from the logs when I connected to there VPN Edit. tls-cipher TLS-DHE-RSA-WITH-AES-256-CBC-SHA:TLS-DHE-DSS-WITH-AES-256-CBC-SHA:TLS-RSA-WITH-AES-256-CBC-SHA Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 4096 bit RSA Here is there website https://www.ivpn.net

Good day, First of all I am running Ubuntu 14.04 on my laptop. What I want to achiev is to connect to tor via Airvpn. (That's the safest setup way, am I right?). Problems that I occure: To connect to Tor, I need to setup proxy in Airvpn client. Ant then use data in Tor configuration and achieve connection. Airvpn client without proxy setting works flawless. After I turn on proxy (socks5), I cant connect to server, I get reconnect loop, log: I 2015.03.09 11:03:54 - AirVPN client version: 2.8.8, System: Linux, Name: Ubuntu 14.10 \n \l, Architecture: x86 . 2015.03.09 11:03:54 - Reading options from /home/vibe/.airvpn/AirVPN.xml . 2015.03.09 11:03:56 - Data Path: /home/vibe/.airvpn . 2015.03.09 11:03:56 - App Path: /usr/lib/AirVPN . 2015.03.09 11:03:56 - Executable Path: /usr/lib/AirVPN/AirVPN.exe . 2015.03.09 11:03:56 - Command line arguments (1): path="/home/vibe/.airvpn" . 2015.03.09 11:03:57 - Operating System: Unix 3.16.0.23 - Linux Q 3.16.0-23-generic #31-Ubuntu SMP Tue Oct 21 18:00:35 UTC 2014 i686 i686 i686 GNU/Linux . 2015.03.09 11:03:57 - Updating systems & servers data ... I 2015.03.09 11:03:57 - OpenVPN Driver - Found I 2015.03.09 11:03:57 - OpenVPN - Version: OpenVPN 2.3.2 (/usr/sbin/openvpn) I 2015.03.09 11:03:57 - SSH - Version: OpenSSH_6.6.1p1 Ubuntu-8, OpenSSL 1.0.1f 6 Jan 2014 (/usr/bin/ssh) I 2015.03.09 11:03:57 - SSL - Version: stunnel 5.02 (/usr/bin/stunnel4) I 2015.03.09 11:03:57 - IPV6: Available ! 2015.03.09 11:03:57 - Ready . 2015.03.09 11:03:57 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:03:58 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) I 2015.03.09 11:04:49 - Session starting. I 2015.03.09 11:04:49 - Installing tunnel driver F 2015.03.09 11:04:50 - Only TCP protocol is allowed with a proxy. . 2015.03.09 11:04:58 - Updating systems & servers data ... . 2015.03.09 11:04:58 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:04:58 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) I 2015.03.09 11:05:12 - Session starting. I 2015.03.09 11:05:12 - Installing tunnel driver I 2015.03.09 11:05:12 - Retrieving manifest W 2015.03.09 11:05:12 - Unable to retrieve systems & servers data. Continue anyway with the old data. . 2015.03.09 11:05:12 - Updating systems & servers data ... I 2015.03.09 11:05:12 - Checking authorization ... . 2015.03.09 11:05:12 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Checking authorization ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Checking authorization ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:13 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) . 2015.03.09 11:05:13 - Checking authorization ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:13 - Authorization check failed, continue anyway ({1]) ! 2015.03.09 11:05:13 - Connecting to Grafias (Netherlands, Amsterdam) I 2015.03.09 11:05:13 - DNS of the system will be updated to VPN DNS (ResolvConf method) . 2015.03.09 11:05:13 - OpenVPN > OpenVPN 2.3.2 i686-pc-linux-gnu [sSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [eurephia] [MH] [iPv6] built on Dec 1 2014 . 2015.03.09 11:05:13 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:3100 . 2015.03.09 11:05:13 - OpenVPN > NOTE: the current --script-security setting may allow this configuration to call user-defined scripts . 2015.03.09 11:05:13 - OpenVPN > Control Channel Authentication: tls-auth using INLINE static key file . 2015.03.09 11:05:13 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2015.03.09 11:05:13 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2015.03.09 11:05:13 - OpenVPN > Socket Buffers: R=[87380->131072] S=[16384->131072] . 2015.03.09 11:05:13 - OpenVPN > Attempting to establish TCP connection with [AF_INET]127.0.0.1:9150 [nonblock] . 2015.03.09 11:05:13 - OpenVPN > TCP connection established with [AF_INET]127.0.0.1:9150 . 2015.03.09 11:05:13 - OpenVPN > socks_handshake: server asked for username/login auth but we were not provided any credentials . 2015.03.09 11:05:13 - OpenVPN > SIGTERM[soft,init_instance] received, process exiting ! 2015.03.09 11:05:13 - Disconnecting . 2015.03.09 11:05:13 - Connection terminated. I 2015.03.09 11:05:16 - Checking authorization ... . 2015.03.09 11:05:16 - Checking authorization ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:16 - Authorization check failed, continue anyway ({1]) I 2015.03.09 11:05:16 - Cancel requested. ! 2015.03.09 11:05:16 - Session terminated. By the way how to access Tor line in Airvpn->Preferences->Protocols? Off problem topic question - would openvpn increase security or solve problem? (Sorry newbie) Have a nice day, amen1337 P.S.: Sorry for poor English