chupa 0 Posted ... I followed the guide here to load the config on my Asus RT-AC66U running Asuswrt-Merlin 380.66_4 : https://airvpn.org/asuswrt/ The guide is slightly different from the current version of Merlin but I think i was able to manage. However when I went to upload the file it hung for over 10 min. I restarted the router, regenerated a config and retried and it wen though this time. Does this configuration look correct? It connects but I am still having issues with port forwarding. Quote Share this post Link to post
go558a83nk 364 Posted ... I hope you're prepared for about 10mbit/s max speed. Port forwarding is done with iptables in the same way as dd-wrt or tomato. Do not use the web GUI for port forwarding as that works from WAN to LAN, you need TUN to LAN. Quote Share this post Link to post
chupa 0 Posted ... I hope you're prepared for about 10mbit/s max speed. Port forwarding is done with iptables in the same way as dd-wrt or tomato. Do not use the web GUI for port forwarding as that works from WAN to LAN, you need TUN to LAN. Does the config look correct though? Is the speed limitation from the hardware or airvpn in general? I'll have to look into configuring iptables. Quote Share this post Link to post
go558a83nk 364 Posted ... I hope you're prepared for about 10mbit/s max speed. Port forwarding is done with iptables in the same way as dd-wrt or tomato. Do not use the web GUI for port forwarding as that works from WAN to LAN, you need TUN to LAN. Does the config look correct though? Is the speed limitation from the hardware or airvpn in general? I'll have to look into configuring iptables. if it connects and works then the config is correct. The speed limitation is from the CPU of the router. Quote Share this post Link to post
duffydack 4 Posted ... I use merlin on my ac87u router, works great. I'm not sure about using client 5, I always use client 1 as it uses the core not used by the system, so gives you more speed. My max is only 5MB/s anyway, and I get that easily, core using maybe 50%. As for port forwards, here is my firewall-start script in /jffs/scripts/ for torrent and plex for reference, adjust accordingly. https://ptpb.pw/MoAG 2 go558a83nk and chupa reacted to this Quote Share this post Link to post
chupa 0 Posted ... I use merlin on my ac87u router, works great. I'm not sure about using client 5, I always use client 1 as it uses the core not used by the system, so gives you more speed. My max is only 5MB/s anyway, and I get that easily, core using maybe 50%. As for port forwards, here is my firewall-start script in /jffs/scripts/ for torrent and plex for reference, adjust accordingly. https://ptpb.pw/MoAG you use that script for firewall-start and not nat-start? Ive been going by this post for help:https://airvpn.org/topic/11264-asus-merlin-wrt-port-forwarding-script-setup/ Quote Share this post Link to post
chupa 0 Posted ... I figured it out. For anyone else out there I hope this helps: Asus RT-AC66U running Asuswrt-Merlin firmware 380.66.4 Use the steps in this post to help you create enable and create the scripts on your router:https://airvpn.org/topic/11264-asus-merlin-wrt-port-forwarding-script-setup/ I creates a firewall-start script which is as follows: #!/bin/sh logger "firewall" "Applying my custom rules" iptables -I FORWARD -i tun12 -p tcp -d IP.IP.IP.IP --dport PPPPP -j ACCEPT iptables -I FORWARD -i tun12 -p udp -d IP.IP.IP.IP --dport PPPPP -j ACCEPT iptables -t nat -I PREROUTING -i tun12 -p tcp --dport PPPPP -j DNAT --to-destination IP.IP.IP.IP iptables -t nat -I PREROUTING -i tun12 -p udp --dport PPPPP -j DNAT --to-destination IP.IP.IP.IP Adjust the IP and PPPP to your liking. I use tun12 because my airvpn connection is setup in OpenVPN client 2. Thanks for the help! Quote Share this post Link to post
duffydack 4 Posted ... I use merlin on my ac87u router, works great. I'm not sure about using client 5, I always use client 1 as it uses the core not used by the system, so gives you more speed. My max is only 5MB/s anyway, and I get that easily, core using maybe 50%. As for port forwards, here is my firewall-start script in /jffs/scripts/ for torrent and plex for reference, adjust accordingly. https://ptpb.pw/MoAG you use that script for firewall-start and not nat-start? Ive been going by this post for help:https://airvpn.org/topic/11264-asus-merlin-wrt-port-forwarding-script-setup/ I read somewhere ages ago about using firewall-start to put your iptables commands, and it's always worked so stuck with it. No idea about nat-start, never used it.Any reason you use client2 and not client1? Quote Share this post Link to post
chupa 0 Posted ... I use merlin on my ac87u router, works great. I'm not sure about using client 5, I always use client 1 as it uses the core not used by the system, so gives you more speed. My max is only 5MB/s anyway, and I get that easily, core using maybe 50%. As for port forwards, here is my firewall-start script in /jffs/scripts/ for torrent and plex for reference, adjust accordingly. https://ptpb.pw/MoAG you use that script for firewall-start and not nat-start? Ive been going by this post for help:https://airvpn.org/topic/11264-asus-merlin-wrt-port-forwarding-script-setup/ I read somewhere ages ago about using firewall-start to put your iptables commands, and it's always worked so stuck with it. No idea about nat-start, never used it.Any reason you use client2 and not client1? No reason other than I have a different openvpn connection on client 1 Quote Share this post Link to post