Can't connect on Win7 only

[AnnaGlup 0]

Hi,

 

I have a curios problem on Win7 x64 and no more ideas. Maybe someone can help ?

 

I have a laptop with a freshly installed Windows 7 x64 and using the AirVPN software.

I come to the point where it says "connect to ......" and nothing more. After 20-30 seconds it does a retry and so on.

 

The funny thing is I can connect with my smartphone without any problems (Android, using OpenVPN, UDP 443).

 

Let's make long story short. My test results are:

- At home I can connect via smartphone but not via Laptop

- But shouldn't be a Laptop problem because it works at work.

- I tried several different VPN servers and countries.

- I tried OpenVPN with the same result (can't connect). The log is shown below.

- I tried it via WLAN and LAN. Same result

- Internet works without problems

- I checked some network settings. I'm using automatic IP address and have no proxy.

- Switched off Firewall. Doesn't help.

- Did a reinstall without success.

 

No more ideas, now. Can someone help ?

 

OpenVPN Log laptop at home:

Thu Dec 04 08:10:59 2014 OpenVPN 2.3.6 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [PKCS11] [iPv6] built on Dec 1 2014
Thu Dec 04 08:10:59 2014 library versions: OpenSSL 1.0.1j 15 Oct 2014, LZO 2.08
Thu Dec 04 08:10:59 2014 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Thu Dec 04 08:10:59 2014 Need hold release from management interface, waiting...
Thu Dec 04 08:10:59 2014 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Thu Dec 04 08:10:59 2014 MANAGEMENT: CMD 'state on'
Thu Dec 04 08:10:59 2014 MANAGEMENT: CMD 'log all on'
Thu Dec 04 08:11:00 2014 MANAGEMENT: CMD 'hold off'
Thu Dec 04 08:11:00 2014 MANAGEMENT: CMD 'hold release'
Thu Dec 04 08:11:00 2014 Control Channel Authentication: tls-auth using INLINE static key file
Thu Dec 04 08:11:00 2014 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Dec 04 08:11:00 2014 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Dec 04 08:11:00 2014 Socket Buffers: R=[8192->8192] S=[8192->8192]
Thu Dec 04 08:11:00 2014 MANAGEMENT: >STATE:1417677060,RESOLVE,,,
Thu Dec 04 08:11:00 2014 UDPv4 link local: [undef]
Thu Dec 04 08:11:00 2014 UDPv4 link remote: [AF_INET]46.165.208.70:443
Thu Dec 04 08:11:00 2014 MANAGEMENT: >STATE:1417677060,WAIT,,,

[Staff 10691]

Hello,

 

what happens if you try a connection in TCP? With our client Eddie you can change connection mode in "AirVPN" -> "Preferences" -> "Protocols". In your laptop, try for example port 443, protocol TCP.

 

Have a check to antivirus software (if any) as well, just in case it's blocking openvpn.exe

 

Kind regards

[AnnaGlup 0]

Thanks for your suggestions.

No virus scanner installed.

I tried TCP and the issue was a liitle bit different. After connection it has problems to reach remote server and disconnets after 5 retries.

This gave me the idea to have a deeper look in the Router settings. Notebook was configured as Guest only in Router :-(

After change it works, now.

 

Thanks for your help.