ANSWERED Castor/IPv6 question and problem

[NinjaThunderbolt 5]

Hi,

 

My ISP does not support IPv6, and was hoping that using Castor with AirVPN would give me an IPv6 address and let me use IPv6-only sites.

 

However, when I try to connect with Eddie, it puts in the Windows 10 notifications "netsh failed: error code 1"

 

Is this to be expected if your ISP does not support IPv6, or is there something else I have to do to get it to work?

 

Thank you!

[Clodo 182]

My ISP does not support IPv6, and was hoping that using Castor with AirVPN would give me an IPv6 address and let me use IPv6-only sites.

Hope correct.

 

Please check in Windows "Open Network & Internet settings" > "Change adapter options" > right click on EACH interface > "Properties" > check if TCP/IPv6 is checked. If not, check it.

[NinjaThunderbolt 5]

After enabling IPv6 on the interfaces, and in Eddie switching IPv6 from "Disable" to "None" and unchecking "Disable IPv6 at OS level if requested", I can access ipv6.nop.hu. Thank you!

[Guest]

 

My ISP does not support IPv6, and was hoping that using Castor with AirVPN would give me an IPv6 address and let me use IPv6-only sites.

Hope correct.

 

Please check in Windows "Open Network & Internet settings" > "Change adapter options" > right click on EACH interface > "Properties" > check if TCP/IPv6 is checked. If not, check it.

Don't have ipv6 either and checked and ipv6 is enabled in the adapters and resetted eddie settings but i keep getting the error below every time i try to connect to the experimental server. Any ideas?

 

curl: (7) Failed to connect to castor_exit.airservers.org port 89: Bad access