Search the Community

Hi, I am currently connected to Betelgeuse on a Netgear R7000 running dd-wrt firmware but the speeds I'm getting are massively throttled. I use Virgin and have a 150meg account, connected to the router without vpn from a gateway wirelessly onto my laptop I get 116mbps but as soon as I enable vpn I get 16mbps. Any hints, advice or tips would be greatly appreciated.

So I love AirVPN, I use the portable app that runs on my machine, and I get great speeds, usually 60 Mbps when connected. However I would love to run it on my router so that way I could possibly run another VPN on top of it for extra security, but it's more so for the peace of mind knowing that my router is 100% securing my data at all times. I have 2 different routers, and I was going to try to have my main dedicated router broadcasting my normal signal, and then my Asus Rt-n66u running a VPN at all times. After running through the setup guides and everything I was able to get a successful connection however the speeds were terrible, maxing out at around 7 Mbps. I need desperate help as my other router (r7000) has a similar problem with speeds only maxing out at about 10 Mbps. This isn't doable, and I love getting decent speeds but I can't work with something this slow. Has anyone else here had any similar issues with installation to a router? I was also looking at the Ubiquiti Edgerouter as a higher performing router, I just want to be sure I've expended all my resources before I buy another router that may be more powerful.

Currently, I divide my wireless SSID into two sets. I bridge WAN, LAN1, LAN2, LAN3, eth1 and eth2 as br0. br1 is set as wl1.1 and vlan3. If I want to force br0 to use OpenVPN, br1 uses outside tunnel network, how can I set it up? Right now I write iptables as following. #Enable NAT on the WAN (Correct a BUG) iptables -t nat -I POSTROUTING -o br0 -j SNAT --to `nvram get lan_ipaddr` #Restrict br1 from accessing br0 iptables -I FORWARD -i br1 -d `nvram get lan_ipaddr`/`nvram get lan_netmask` -m state --state NEW -j logdrop iptables -I FORWARD -i br1 -o br0 -m state --state NEW -j logdrop #Restrict br1 from accessing tun1 iptables -I FORWARD -i br1 -o tun1 -m state --state NEW -j logdrop #Restrict br1 from accessing the router #iptables -I INPUT -i br1 -m state --state NEW -j DROP #Allow br1 to access DHCP on the router iptables -I INPUT -i br1 -p udp --dport 67 -j ACCEPT #Allow br1 to access DNS on the router iptables -I INPUT -i br1 -p udp --dport 53 -j ACCEPT iptables -I INPUT -i br1 -p tcp --dport 53 -j ACCEPT #Allow br0 to access DNS on the router iptables -I INPUT -i br0 -p udp --dport 53 -j ACCEPT iptables -I INPUT -i br0 -p tcp --dport 53 -j ACCEPT Device : R7000 using Firmware: DD-WRT v3.0-r29440M kongac (04/19/16) with YAMON

I want to use airvpn on my R7000. Currently, I can add single airvpn server to my router. I want to be able to switch to other airvpn server without reconfigure my router. Is there any possible chance to do it?

Dear community, Hoping someone can help with this.... I am trying to setup a firewall script for my router running Tomato Firmware 1.28.0000 -121 K26ARM USB AIO-64K by SHIBBY on a Netgear R7000 Nighthawk on mostly default settings apart from the VPN Client. The script is to block all non-VPN traffic even if the connection fails and i have tried several suggestions made in the forums without success. Below is the script most people have success with (except me): iptables -I FORWARD -i br0 -o tun0 -j ACCEPT iptables -I FORWARD -i tun0 -o br0 -j ACCEPT iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I INPUT -i tun0 -j REJECT iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE (from https://airvpn.org/topic/4287-how-to-block-all-traffic-with-dd-wrt-if-vpn-connection-fails/) I think the problem lies in the assigned interface names. Below is my current routing table while VPN'd: In short can someone modify the script to suite my arrangement?? or let me know what direction I need to take to set this up.... using the script above lets traffic through even if I stop the VPN client and my attempts to modify usually blocks all traffic. Any help would me much appreciated, EWS

I am trying to configure AirVPN as per the website instruction. I am running a Netgear R7000 with DD-WRT firmware (DD-WRT v24-sp2 (04/16/14) kongac). I have loaded the settings as pictured, but there are a few additional settings that aren't mentioned in the guide. At any rate, the status page never updates and I do not connect. Settings screenshot attached. Thanks. DD-WRT AirVPN Settings.tiff