Блокировка протоколов wireguard и openvpn в России

[billy2210 0]

В инструкции сказано сохранить скачанный файл в телефоне в папке sdcard/ main storage, у меня в телефоне в проводнике нет такой папки!

[OpenSourcerer 1435]

В принципе всё равно куда скачивать файл, надо только найти потом)

И ещё, в этом форуме основной язык – английский. Прошу писать по-английскому чтобы другие понимали о чём речь без переводчика. Могу предложить личные сообщения на русском если проблемы с английском есть (но это не официально)).

---

For the readers, the gist is that there is a slight confusion as to where to save the downloaded profile as newer Android versions don't use /sdcard anymore. It was noted that it can be saved anywhere.

[billy2210 0]

I did everything according to the instructions, in Termux-e, downloaded from F-Drouda, this is what it says, look at the end there, maybe I placed Y or N incorrectly, when questions were asked there when loading pkg, ... and for some reason- then the ls command in the AirVPN folder, uploaded to the root of the phone's file system, shows only 2 files, and the explorer in the phone shows 3 files ......
~ $ termux-setup-storage
~ $ cd storage/shared/AirVPN
~/.../shared/AirVPN $ ls
AirVPN_LV-Riga_Schedir_SSL-443.ovpn  stunnel.crt
AirVPN_LV-Riga_Schedir_SSL-443.ssl
~/.../shared/AirVPN $ cd
~ $

here is the file modified according to the instructions -here is the file modified according to the instructions -
# --------------------------------------------------------
# Air VPN | https://airvpn.org | Friday 11th of August 2023 06:59:21 AM
# STunnel Client Configuration
# AirVPN_LV-Riga_Schedir_SSL-443
# --------------------------------------------------------

foreground = yes
pid = /data/data/com.termux/fales/home/stunnel4.pid
client = yes
debug = 6

[openvpn]
accept = 127.0.0.1:1413
connect = 46.183.217.14:443
TIMEOUTclose = 0
verify = 3
CAfile = stunnel.crt



~/.../shared/AirVPN $ ls
AirVPN_LV-Riga_Schedir_SSL-443.ovpn  stunnel.crt
AirVPN_LV-Riga_Schedir_SSL-443.ssl
~/.../shared/AirVPN $ stunnel AirVPN*.ssl
2023.08.11 17:25:28 LOG6[ui]: Initializing inetd mode configuration
2023.08.11 17:25:28 LOG5[ui]: stunnel 5.69 on arm-unknown-linux-androideabi platform
2023.08.11 17:25:28 LOG5[ui]: Compiled with OpenSSL 3.0.8 7 Feb 2023
2023.08.11 17:25:28 LOG5[ui]: Running  with OpenSSL 3.1.2 1 Aug 2023
2023.08.11 17:25:28 LOG5[ui]: Update OpenSSL shared libraries or rebuild stunnel
2023.08.11 17:25:28 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,OCSP,PSK,SNI
2023.08.11 17:25:28 LOG6[ui]: Initializing inetd mode configuration
2023.08.11 17:25:28 LOG5[ui]: Reading configuration from file /storage/emulated/0/AirVPN/AirVPN_LV-Riga_Schedir_SSL-443.ssl
2023.08.11 17:25:28 LOG5[ui]: UTF-8 byte order mark not detected
2023.08.11 17:25:28 LOG6[ui]: Compression disabled
2023.08.11 17:25:28 LOG6[ui]: Initializing service [openvpn]
2023.08.11 17:25:28 LOG6[ui]: stunnel default security level set: 2
2023.08.11 17:25:28 LOG6[ui]: Session resumption enabled
2023.08.11 17:25:28 LOG6[ui]: Configured trusted server CA: C=IT, ST=Italy, L=Perugia, O=AirVPN, OU=stunnel, CN=stunnel.airvpn.org, emailAddress=info@airvpn.org
2023.08.11 17:25:28 LOG6[ui]: DH initialization skipped: client section
2023.08.11 17:25:28 LOG5[ui]: Configuration successful
2023.08.11 17:25:28 LOG6[ui]: Service [openvpn] (FD=8) bound to 127.0.0.1:1413
2023.08.11 17:25:28 LOG3[ui]: Cannot create pid file /data/data/com.termux/fales/home/stunnel4.pid
2023.08.11 17:25:28 LOG3[ui]: create: No such file or directory (2)

Edited ... by billy22-10@protonmail.com

[OpenSourcerer 1435]

1 hour ago, billy22-10@protonmail.com said:

and for some reason- then the ls command in the AirVPN folder, uploaded to the root of the phone's file system, shows only 2 files, and the explorer in the phone shows 3 files ......

Are you sure? Your ls output shows three as well…

The principal error in the logs seems to be:

2023.08.11 17:25:28 LOG3[ui]: Cannot create pid file /data/data/com.termux/fales/home/stunnel4.pid
2023.08.11 17:25:28 LOG3[ui]: create: No such file or directory (2)

Permissions, maybe?