Wireguard configuration to allow local server access

[Bradford 0]

I am using Wireguard on my android device and would like access to my local unraid server while connected to AirVPN.

Using the AirVPN config generator I see that the "Allowed IPs" is set to "0.0.0.0/0, ::/0".  This routes ALL traffic over the VPN.

What would be the best way to allow traffic to my home server at 192.168.1.100 but route all other traffic through the VPN?

Thanks.
 

Edited ... by Bradford
Spellling

[Flx 81]

 

[Bradford 0]

Thank you for the link.

I'm not a network expert.  Can you translate what exactly this setting means:  "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1".

I just want to make sure I'm not opening up more than I need to.

Thanks.