Port Forwarding and Game Server Hosting - UT3 (UNREAL TOURNMENT 3)

[ARPANET+ 2]

Hello,

im hosting a game server for unreal tournment 3.
the point is that the game server choice the wrong nic adapter to bind the ip correctly.

instead of 10.xxx it  set/choice 192.168.1.4 everytime...  it is a dedicated server.

so in this way is impossible put on internet the server of the game and let join the players.

i already fowarded the neded ports here in website dedicated section and set everyting in the .ini files of the game.

i never save or foward in my modem-router the fowarded ports for security reason. upnp is disabled too by me . using a vpn service.

setting manualy the nic priority the server game  not work...

SERVER GAME LOGS:

Log: Virtual  memory allocation size: 176.15 MByte (184709120 Bytes)
Log: Physical memory allocation size:   0.00 MByte (0 Bytes)
Log: Game class is 'UTVehicleCTFGame_Content'
Init: WinSock: Socket queue 131072 / 131072
Log: NetMode is now 1
Log: Primary PhysX scene will be in software.
Log: Creating Primary PhysX Scene.
Log: Bringing World VCTF-ArenaOfLife.TheWorld up for play 
ScriptLog: MinNetPlayers:  0
UTVoting: Game voting is enabled
UTVoting: Map voting is enabled
UTVoting: Mutator voting is enabled
UTVoting: Kick voting is enabled
ScriptLog: Web Server Created http://192.168.1.4:9913 Port: 9913 MaxCon 18 ExpirationSecs 86400 Enabled True
Log: GConfig::Find has loaded file:  ..\UTGame\Localization\INT\WebAdmin.INT
WebAdmin: Starting UT3 WebAdmin v1.17 - 2009-09-13 20:13:18 +0000
WebAdmin: Creating IWebAdminAuth instance from: BasicWebAdminAuth
WebAdmin: Creating ISessionHandler instance from: SessionHandler
WebAdmin: Updating news...
Log: Bringing up level for play took: 0.328217
Log: ########### Finished loading level: 0.778586 seconds
Init: Game engine initialized
Log: Initializing Game Engine Completed
Log: FSTUNClient resolved stun.faktortel.com.au:3478 (0.0.0.0)
Log: FSTUNClient starting test 1...
Log: Error Sending Test Packet 1
Log: FSTUNClient error sending test packet...

any suggestions ?

thank you in advance for your support !!

[OpenSourcerer 1359]

As this suggests a problem with the dedicated server software rather than anything from AirVPN, I'm moving this to Off-Topic.
 

48 minutes ago, ARPANET+ said:

the point is that the game server choice the wrong nic adapter to bind the ip correctly.

You can hope that someone else with experience setting up this dedicated server chimes in. Otherwise I'd direct you to other specialized resources for this game.

[ARPANET+ 2]

thank you for your quck response...
yeah hope someone may help...
thanx again

[Stalinium 44]

I think this is what network priority is for in Windows. You had to enable the menu bar by pressing ALT, then Advanced -> Advanced Settings. Bring the OpenVPN network adapter to the top and see if it changes UT's selection.
Relevant words: LAN wrong network selection by game server

[ARPANET+ 2]

hi,

i can go in advanced settings but cannot see nothing you show in your screenshot..
as example i cannot see air vpn tap in the adapters  list ect...
i see only web client network + windows microsoft network and host provider network  remote desktop
thank you

[Stalinium 44]

I see it was removed in later Windows 10 updates. Judging by the two articles, all it did was to change the interface's metric (how costly a path would be, if started from that network interface). Low cost is preferred. See the two guides:
https://www.ghacks.net/2021/11/09/how-to-change-network-adapter-priorities-on-windows-11/
https://www.isunshare.com/windows-10/change-network-connection-priority-in-windows-10.html

Before you change the metric to a lower value by following the instructions, please run "route -4 print" and figure out what's the metric for your LAN interface connections and the VPN (OpenVPN-TAP) connections. My name is different because I followed a guide on the forums to create a custom name.

[ARPANET+ 2]

Hello !!
have the main nic and the vpn tap but win 10 x64 just not remember what was set as primary nic interface...
i take a look in the 2 guide links but no way to do it work...
system have not issue,blue screen ect.
thank you for your guide and suppport 
very appreciated 

[Stalinium 44]

You can send me "route -4 print" output in PM, remove unique identifiers like adapter names, MAC addresses. To see what it looks like on your system.
Have you tried to search for UT server guides for Hamachi/Tunngle etc? The exact same problem

[ARPANET+ 2]

hello and a big thank you to you guyz helping to fix the UT3 issue...
about "route -4 print" output seem something to do with linux based os ?
ordering the nics in advanced settings is not possible under latest win 10 x64 os...in that case i was able to fix it from time.
btw i appreciate your support 🙂

[ARPANET+ 2]

Hello !!
today , cannot login - acces  my own server with or without the vpn on - off..
checked everything not working...

any suggestions ?

thank you !!