rilasofa 0 Posted ... Hello, I've created a router config and set it up on my router, but the traffic is not going through the VPN. Here is a part of the generated router config without the certificates: clientdev tun proto udp remote us.vpn.airdns.org 443 resolv-retry infinite nobind persist-key persist-tun remote-cert-tls server cipher AES-256-CBC comp-lzo no route-delay 5 verb 3 explicit-exit-notify 5 Here is my router log: Mar 22 09:11:09 RT-N56U: WAN up (eth3) Mar 22 09:11:09 dnsmasq[397]: read /etc/hosts - 3 addresses Mar 22 09:11:09 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses Mar 22 09:11:09 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc Mar 22 09:11:09 dnsmasq[397]: using nameserver 167.206.10.178#53 Mar 22 09:11:09 dnsmasq[397]: using nameserver 167.206.10.179#53 Mar 22 09:11:09 miniupnpd[449]: version 1.9 starting UPnP-IGD ext if eth3 BOOTID=1490188269 Mar 22 09:11:09 miniupnpd[449]: HTTP listening on port 17455 Mar 22 09:11:09 httpd[445]: Server listening port 80 (HTTP). Mar 22 09:11:10 RT-N56U: starting OpenVPN client... Mar 22 09:11:10 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:11:10 kernel: br0: port 3(rai0) entered forwarding state Mar 22 09:11:10 kernel: br0: port 2(ra0) entered forwarding state Mar 22 09:11:10 kernel: br0: port 1(eth2) entered forwarding state Mar 22 09:11:19 NTP Client: Synchronizing time to pool.ntp.org. Mar 22 09:11:22 NTP Client: System time changed, offset: 2.135226s Mar 22 09:12:13 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:13:15 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:14:17 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:15:19 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:16:21 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:17:23 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:18:25 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Mar 22 09:19:27 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Attaching a screenshot from my router admin config: Can you please help me troubleshoot? Thanks!Jim Quote Share this post Link to post
go558a83nk 364 Posted ... Is there more to that log? according to the log you posted there openvpn never actually ran. Quote Share this post Link to post
rilasofa 0 Posted ... Here's the full log (replaced my IP with -.-.-.-): Apr 2 17:53:31 syslogd started: BusyBox v1.24.1Apr 2 17:53:31 RT-N56U: firmware version: 3.4.3.9-099 Apr 2 17:53:31 kernel: klogd started: BusyBox v1.24.1 (2016-01-31 21:51:57 KRAT) Apr 2 17:53:31 kernel: Linux version 3.4.110 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Sun Jan 31 23:21:35 KRAT 2016 Apr 2 17:53:31 kernel: Ralink SoC: RT3883, RevID: 0105, RAM: DDR2, XTAL: 40MHz Apr 2 17:53:31 kernel: CPU/OCP/SYS frequency: 500/166/166 MHz Apr 2 17:53:31 kernel: CPU revision is: 0001974c (MIPS 74Kc) Apr 2 17:53:31 kernel: Determined physical RAM map: Apr 2 17:53:31 kernel: memory: 08000000 @ 00000000 (usable) Apr 2 17:53:31 kernel: Zone PFN ranges: Apr 2 17:53:31 kernel: Normal 0x00000000 -> 0x00008000 Apr 2 17:53:31 kernel: Movable zone start PFN for each node Apr 2 17:53:31 kernel: Early memory PFN ranges Apr 2 17:53:31 kernel: 0: 0x00000000 -> 0x00008000 Apr 2 17:53:31 kernel: On node 0 totalpages: 32768 Apr 2 17:53:31 kernel: free_area_init_node: node 0, pgdat 8032d9e0, node_mem_map 81000000 Apr 2 17:53:31 kernel: Normal zone: 256 pages used for memmap Apr 2 17:53:31 kernel: Normal zone: 0 pages reserved Apr 2 17:53:31 kernel: Normal zone: 32512 pages, LIFO batch:7 Apr 2 17:53:31 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Apr 2 17:53:31 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Apr 2 17:53:31 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Apr 2 17:53:31 kernel: pcpu-alloc: [0] 0 Apr 2 17:53:31 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Apr 2 17:53:31 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs Apr 2 17:53:31 kernel: PID hash table entries: 512 (order: -1, 2048 bytes) Apr 2 17:53:31 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Apr 2 17:53:31 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Apr 2 17:53:31 kernel: Writing ErrCtl register=00000040 Apr 2 17:53:31 kernel: Readback ErrCtl register=00000040 Apr 2 17:53:31 kernel: Memory: 126264k/131072k available (2839k kernel code, 4808k reserved, 416k data, 196k init, 0k highmem) Apr 2 17:53:31 kernel: NR_IRQS:40 Apr 2 17:53:31 kernel: console [ttyS0] enabled Apr 2 17:53:31 kernel: Calibrating delay loop... 249.34 BogoMIPS (lpj=498688) Apr 2 17:53:31 kernel: pid_max: default: 32768 minimum: 301 Apr 2 17:53:31 kernel: Mount-cache hash table entries: 512 Apr 2 17:53:31 kernel: NET: Registered protocol family 16 Apr 2 17:53:31 kernel: bio: create slab <bio-0> at 0 Apr 2 17:53:31 kernel: SCSI subsystem initialized Apr 2 17:53:31 kernel: usbcore: registered new interface driver usbfs Apr 2 17:53:31 kernel: usbcore: registered new interface driver hub Apr 2 17:53:31 kernel: usbcore: registered new device driver usb Apr 2 17:53:31 kernel: PCI host bridge to bus 0000:00 Apr 2 17:53:31 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff] Apr 2 17:53:31 kernel: pci_bus 0000:00: root bus resource [io 0x10160000-0x1016ffff] Apr 2 17:53:31 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400 Apr 2 17:53:31 kernel: pci 0000:00:00.0: reg 0x14: [mem 0x20100000-0x2010ffff] Apr 2 17:53:31 kernel: pci 0000:00:00.0: supports D1 Apr 2 17:53:31 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot Apr 2 17:53:31 kernel: pci 0000:01:00.0: [1814:3091] type 00 class 0x028000 Apr 2 17:53:31 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff] Apr 2 17:53:31 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot Apr 2 17:53:31 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff] Apr 2 17:53:31 kernel: pci 0000:00:00.0: BAR 1: assigned [mem 0x20100000-0x2010ffff] Apr 2 17:53:31 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff] Apr 2 17:53:31 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01] Apr 2 17:53:31 kernel: pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff] Apr 2 17:53:31 kernel: Switching to clocksource MIPS Apr 2 17:53:31 kernel: NET: Registered protocol family 2 Apr 2 17:53:31 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes) Apr 2 17:53:31 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes) Apr 2 17:53:31 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes) Apr 2 17:53:31 kernel: TCP: Hash tables configured (established 4096 bind 4096) Apr 2 17:53:31 kernel: TCP: reno registered Apr 2 17:53:31 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes) Apr 2 17:53:31 kernel: NET: Registered protocol family 1 Apr 2 17:53:31 kernel: PCI: CLS 32 bytes, default 32 Apr 2 17:53:31 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Apr 2 17:53:31 kernel: msgmni has been set to 246 Apr 2 17:53:31 kernel: io scheduler noop registered (default) Apr 2 17:53:31 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled Apr 2 17:53:31 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A Apr 2 17:53:31 kernel: Ralink GPIO driver initialized. Number of GPIO: 96, GPIO mode: 0000185D Apr 2 17:53:31 kernel: loop: module loaded Apr 2 17:53:31 kernel: ralink flash device: 0x1000000 at 0x1c000000 Apr 2 17:53:31 kernel: Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb Apr 2 17:53:31 kernel: Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Apr 2 17:53:31 kernel: Amd/Fujitsu Extended Query Table at 0x0040 Apr 2 17:53:31 kernel: Amd/Fujitsu Extended Query version 1.1. Apr 2 17:53:31 kernel: number of CFI chips: 1 Apr 2 17:53:31 kernel: Creating 7 MTD partitions on "Ralink SoC physically mapped flash": Apr 2 17:53:31 kernel: 0x000000000000-0x000000030000 : "Bootloader" Apr 2 17:53:31 kernel: 0x000000030000-0x000000040000 : "Config" Apr 2 17:53:31 kernel: 0x000000040000-0x000000050000 : "Factory" Apr 2 17:53:31 kernel: 0x000000050000-0x0000001787e0 : "Kernel" Apr 2 17:53:31 kernel: 0x0000001787e0-0x0000007f0000 : "RootFS" Apr 2 17:53:31 kernel: 0x0000007f0000-0x000000800000 : "Storage" Apr 2 17:53:31 kernel: 0x000000050000-0x000000800000 : "Firmware_Stub" Apr 2 17:53:31 kernel: tun: Universal TUN/TAP device driver, 1.6 Apr 2 17:53:31 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Apr 2 17:53:31 kernel: Ralink APSoC Ethernet Driver v3.2.2 (raeth) Apr 2 17:53:31 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536 Apr 2 17:53:31 kernel: raeth: NAPI support, weight 32 Apr 2 17:53:31 kernel: raeth: Byte Queue Limits (BQL) support Apr 2 17:53:31 kernel: PPP generic driver version 2.4.2 Apr 2 17:53:31 kernel: PPP MPPE Compression module registered Apr 2 17:53:31 kernel: NET: Registered protocol family 24 Apr 2 17:53:31 kernel: PPTP driver version 0.8.5 Apr 2 17:53:31 kernel: Realtek RTL8367 GigaPHY Switch Driver v2.9. Apr 2 17:53:31 kernel: rtl8367 - hw bridge: W|LLLL Apr 2 17:53:31 kernel: usbcore: registered new interface driver libusual Apr 2 17:53:31 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max) Apr 2 17:53:31 kernel: xt_time: kernel timezone is -0000 Apr 2 17:53:31 kernel: Bridge firewalling registered Apr 2 17:53:31 kernel: gre: GRE over IPv4 demultiplexor driver Apr 2 17:53:31 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Apr 2 17:53:31 kernel: TCP: cubic registered Apr 2 17:53:31 kernel: NET: Registered protocol family 10 Apr 2 17:53:31 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Apr 2 17:53:31 kernel: IPv6 over IPv4 tunneling driver Apr 2 17:53:31 kernel: NET: Registered protocol family 17 Apr 2 17:53:31 kernel: L2TP core driver, V2.0 Apr 2 17:53:31 kernel: PPPoL2TP kernel driver, V2.0 Apr 2 17:53:31 kernel: 8021q: 802.1Q VLAN Support v1.8 Apr 2 17:53:31 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK Apr 2 17:53:31 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4. Apr 2 17:53:31 kernel: Freeing unused kernel memory: 196k freed Apr 2 17:53:31 kernel: Algorithmics/MIPS FPU Emulator v1.5 Apr 2 17:53:31 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel. Apr 2 17:53:31 kernel: APSoC AP Driver version: 2.7.2.0 Apr 2 17:53:31 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002) Apr 2 17:53:31 kernel: RT309x AP Driver version: 2.7.1.5 Apr 2 17:53:31 kernel: usbcore: registered new interface driver usblp Apr 2 17:53:31 kernel: Initializing USB Mass Storage driver... Apr 2 17:53:31 kernel: usbcore: registered new interface driver usb-storage Apr 2 17:53:31 kernel: USB Mass Storage support registered. Apr 2 17:53:31 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 2 17:53:31 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller Apr 2 17:53:31 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 Apr 2 17:53:31 kernel: ehci-platform ehci-platform: irq 18, io mem 0x101c0000 Apr 2 17:53:31 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored Apr 2 17:53:31 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Apr 2 17:53:31 kernel: usb usb1: Product: Generic Platform EHCI Controller Apr 2 17:53:31 kernel: usb usb1: Manufacturer: Linux 3.4.110 ehci_hcd Apr 2 17:53:31 kernel: usb usb1: SerialNumber: ehci-platform Apr 2 17:53:31 kernel: hub 1-0:1.0: USB hub found Apr 2 17:53:31 kernel: hub 1-0:1.0: 2 ports detected Apr 2 17:53:31 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Apr 2 17:53:31 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller Apr 2 17:53:31 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2 Apr 2 17:53:31 kernel: ohci-platform ohci-platform: irq 18, io mem 0x101c1000 Apr 2 17:53:31 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Apr 2 17:53:31 kernel: usb usb2: Product: Generic Platform OHCI Controller Apr 2 17:53:31 kernel: usb usb2: Manufacturer: Linux 3.4.110 ohci_hcd Apr 2 17:53:31 kernel: usb usb2: SerialNumber: ohci-platform Apr 2 17:53:31 kernel: hub 2-0:1.0: USB hub found Apr 2 17:53:31 kernel: hub 2-0:1.0: 2 ports detected Apr 2 17:53:31 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled Apr 2 17:53:31 kernel: raeth: HW VLAN TX offload enabled Apr 2 17:53:31 kernel: raeth: HW Scatter/Gather TX offload enabled Apr 2 17:53:31 kernel: rtl8367 - green ethernet: off Apr 2 17:53:31 kernel: rtl8367 - set broadcast storm control rate as: 10240 kbps Apr 2 17:53:31 kernel: device eth2 entered promiscuous mode Apr 2 17:53:34 kernel: ch40 bssid=b8:3e:59:47:b7:97 Apr 2 17:53:34 kernel: ch40 bssid=12:83:c7:d7:cc:ec Apr 2 17:53:34 kernel: ch40 bssid=d8:50:e6:58:7c:4c Apr 2 17:53:34 kernel: ch40 bssid=00:83:c7:d7:cc:ec Apr 2 17:53:34 kernel: ch44 bssid=f8:e9:03:0c:a1:7b Apr 2 17:53:34 kernel: ch44 bssid=fa:e9:03:0c:a1:7c Apr 2 17:53:34 kernel: ch44 bssid=3c:1e:04:de:f6:65 Apr 2 17:53:34 kernel: ch44 bssid=3e:1e:04:de:f6:66 Apr 2 17:53:34 kernel: ch149 bssid=80:00:6e:f3:d0:15 Apr 2 17:53:34 kernel: ===================================================== Apr 2 17:53:34 kernel: Channel 36 : Dirty = 128, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 40 : Dirty = 408, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 44 : Dirty = 408, False CCA = 2, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 48 : Dirty = 128, False CCA = 9, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 149 : Dirty = 70, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 153 : Dirty = 32, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 161 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: Channel 165 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:34 kernel: ===================================================== Apr 2 17:53:34 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 157 Apr 2 17:53:34 kernel: Min Dirty = 0 Apr 2 17:53:34 kernel: ExChannel = 161 , 0 Apr 2 17:53:34 kernel: BW = 40 Apr 2 17:53:34 kernel: device ra0 entered promiscuous mode Apr 2 17:53:38 kernel: ch1 bssid=48:ee:0c:4c:94:64 Apr 2 17:53:38 kernel: ch1 bssid=4a:ee:0c:4c:94:65 Apr 2 17:53:38 kernel: ch1 bssid=00:b2:8f:63:23:a8 Apr 2 17:53:38 kernel: ch1 bssid=00:83:c7:d7:cc:e4 Apr 2 17:53:38 kernel: ch1 bssid=c2:b2:8f:63:23:a8 Apr 2 17:53:38 kernel: ch1 bssid=48:5d:36:ad:b0:b4 Apr 2 17:53:38 kernel: ch1 bssid=52:83:c7:d7:cc:e4 Apr 2 17:53:38 kernel: ch1 bssid=48:5d:36:36:47:02 Apr 2 17:53:38 kernel: ch1 bssid=48:5d:36:0c:08:2a Apr 2 17:53:38 kernel: ch3 bssid=92:a4:23:e3:74:c5 Apr 2 17:53:38 kernel: ch6 bssid=cc:0d:ec:46:4b:c6 Apr 2 17:53:38 kernel: ch10 bssid=d8:50:e6:58:7c:48 Apr 2 17:53:38 kernel: ch10 bssid=b8:3e:59:4a:99:93 Apr 2 17:53:38 kernel: ch11 bssid=20:aa:4b:38:0c:c2 Apr 2 17:53:38 kernel: ch11 bssid=b2:84:c9:93:6a:28 Apr 2 17:53:38 kernel: ch11 bssid=d8:9d:67:c4:e0:ee Apr 2 17:53:38 kernel: ch11 bssid=32:20:c7:a7:76:38 Apr 2 17:53:38 kernel: ch11 bssid=20:aa:4b:38:0c:c1 Apr 2 17:53:38 kernel: ch11 bssid=f8:e4:fb:15:90:b0 Apr 2 17:53:38 kernel: ch11 bssid=4c:60:de:34:89:85 Apr 2 17:53:38 kernel: ch11 bssid=4e:60:de:34:89:86 Apr 2 17:53:38 kernel: ch11 bssid=c8:a7:0a:c2:25:f8 Apr 2 17:53:38 kernel: ch11 bssid=00:20:c7:a7:76:38 Apr 2 17:53:38 kernel: ===================================================== Apr 2 17:53:38 kernel: Channel 1 : Dirty = 658, False CCA = 103, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 2 : Dirty = 340, False CCA = 767, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 3 : Dirty = 346, False CCA = 182, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 4 : Dirty = 276, False CCA = 179, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 5 : Dirty = 240, False CCA = 225, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 6 : Dirty = 134, False CCA = 859, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 7 : Dirty = 300, False CCA = 711, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 8 : Dirty = 324, False CCA = 463, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 9 : Dirty = 368, False CCA = 136, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 10 : Dirty = 480, False CCA = 166, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: Channel 11 : Dirty = 764, False CCA = 625, Busy Time = 0, Skip Channel = FALSE Apr 2 17:53:38 kernel: ===================================================== Apr 2 17:53:38 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 6 Apr 2 17:53:38 kernel: Min Dirty = 134 Apr 2 17:53:38 kernel: ExChannel = 2 , 10 Apr 2 17:53:38 kernel: BW = 40 Apr 2 17:53:38 kernel: device rai0 entered promiscuous mode Apr 2 17:53:39 kernel: br0: port 3(rai0) entered forwarding state Apr 2 17:53:39 kernel: br0: port 2(ra0) entered forwarding state Apr 2 17:53:39 kernel: br0: port 1(eth2) entered forwarding state Apr 2 17:53:39 kernel: rtl8367 - IGMP/MLD snooping: 1 Apr 2 17:53:39 dnsmasq[397]: started, version 2.75 cachesize 1024 Apr 2 17:53:39 dnsmasq[397]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify Apr 2 17:53:39 dnsmasq-dhcp[397]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d Apr 2 17:53:39 dnsmasq-dhcp[397]: DHCP, sockets bound exclusively to interface br0 Apr 2 17:53:39 dnsmasq[397]: read /etc/hosts - 3 addresses Apr 2 17:53:39 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses Apr 2 17:53:39 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc Apr 2 17:53:39 kernel: eth3: ===> VirtualIF_open Apr 2 17:53:39 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384 Apr 2 17:53:39 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN] Apr 2 17:53:39 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - OFF Apr 2 17:53:39 DHCP WAN Client: starting on eth3 ... Apr 2 17:53:40 DHCP WAN Client: bound (eth3), IP: —.—.—.—, GW: —.—.—.—, lease time: 21600 Apr 2 17:53:40 RT-N56U: WAN up (eth3) Apr 2 17:53:40 dnsmasq[397]: read /etc/hosts - 3 addresses Apr 2 17:53:40 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses Apr 2 17:53:40 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc Apr 2 17:53:40 dnsmasq[397]: using nameserver 167.206.10.178#53 Apr 2 17:53:40 dnsmasq[397]: using nameserver 167.206.10.179#53 Apr 2 17:53:40 miniupnpd[447]: version 1.9 starting UPnP-IGD ext if eth3 BOOTID=1491170020 Apr 2 17:53:40 miniupnpd[447]: HTTP listening on port 45851 Apr 2 17:53:40 httpd[445]: Server listening port 80 (HTTP). Apr 2 17:53:41 RT-N56U: starting OpenVPN client... Apr 2 17:53:41 openvpn-cli[474]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Apr 2 17:53:41 kernel: br0: port 3(rai0) entered forwarding state Apr 2 17:53:41 kernel: br0: port 2(ra0) entered forwarding state Apr 2 17:53:41 kernel: br0: port 1(eth2) entered forwarding state Apr 2 17:53:50 NTP Client: Synchronizing time to pool.ntp.org. Apr 2 17:54:20 NTP Client: Synchronizing time to time.nist.gov. Apr 2 17:54:24 NTP Client: System time changed, offset: 3.217247s Apr 2 17:54:43 openvpn-cli[474]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts) Thanks Quote Share this post Link to post
ulmwind 6 Posted ... In you log there is no final line tun0 up showing successful connection.Please, follow my guide: https://airvpn.org/topic/20315-airvpn-configuration-on-xrmwrt-padavan-preventing-traffic-leakage-outside-tunnel/ If you encounter difficulties, please, change verb 0 to verb 9 comment #mute 0 in OpenVPN Extended Configuration, and bring just OpenVPN-log, not total log from router. Quote Share this post Link to post
Not connected, Your IP: 3.145.99.221
Online: 26279 users - 308050 Mbit/s total BW