AirVPN with AdvancedTomato

[iPerineum 0]

After trying for hours I just can't get OpenVPN running on my AdvancedTomato Access Point (ASUS RT-N18U).

 

Network Setup

Primary Router and DHCP Server: 192.168.2.1
Access Point: 192.168.2.2 | DHCP Disabled, Latest Firmware (3.3-138-AIO), 1st DNS 10.4.0.1, 2nd DNS 192.168.2.1

 

I am using Port 2018 which I opened on my primary router for the AP.

I then followed this guide https://airvpn.org/tomato/ to set everything up.

In the Client Area I can see that the AP connects to the server, but the connection drops every few minutes.

 

However as soon as I start the VPN Client on my AP I have no internet connection at all, until I stop the VPN Client. (Using the AP as my PCs gateway)

 

See below my advanced settings and status page.

 

[iPerineum 0]

No one here with the same problem or at least some help?

[go558a83nk 371]

I'm thinking it's because you can't run an openvpn client while the device is in access point mode.  Usually routers have to be in gateway/router mode to run an openvpn client as they must be able to NAT.