Jump to content
Not connected, Your IP: 18.191.28.200
kjc0109

Ethernet Adapter DNS is 10.4.0.1 after disconnecting from AirVPN

Recommended Posts

I have been running AirVPN on this machine without issue for over 2 years.  I have my Wireless adapter disabled and only use my Ethernet adapter.

 

Today, when I disconnected from AirVPN, my Ethernet adapter could see everything on my network but could not access the Internet.

 

After troubleshooting, it I've found that the DNS is set to 10.4.0.1 even when disconnected from AirVPN.

 

If I manually change it in the Adapter IPv4 settings (to either dynamic or 8.8.8.8), it does not take effect.  I perform an ipconfig /all and the DNS is still 10.4.0.1.  If I reboot the computer, same thing.

 

Again, this just started happening today and I made no changes to my machine.

 

 

Share this post


Link to post

I've rebooted everything.  Also tried flushing DNS cache.  But for whatever reason the 10.4.0.1 DNS is "stuck" on my Ethernet adapter.  No matter what I set it to in the IPv4 settings, it doesn't change.

Share this post


Link to post

You have to contact your ISP to automatically re-set your modem.

Just tell them you can not make a connection and the ISP will re-set your modem properties.

 

Then do the ipconfig and write down the ISP's DNS(s).

Share this post


Link to post

"Resetting the modem" does not make any sense.  I can connect fine through my wireless connection.  It is only the ethernet connection which has the DNS "stuck" at 10.4.0.1.  

Share this post


Link to post

The Problem is you never mentioned your wireless adapter works in your first statement.

You mentoned  that your Ethernet adapter ONLY WAS NOT WORKING.

If you WOULD have mentioned your wireless adapter was working; I would not have made that statement.

Then something wrong with your Ethernet adapter to where it will not correct itself.

As for analyzing your Ethernet adapter; I do not have the technical skills to advise on how to use the device manager on fixing your Ethernet adapter.

Share this post


Link to post

just manually change the DNS back to automatic if you are not connected to VPN at the time.  it should revert back to automatic (from 10.4.0.1) when Eddie disconnects but sometimes there's a hiccup.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...