hershey81 0 Posted ... Anyone else having speed issues on this server? I had to stop using Alkaid due to maintenence and switched to Metallah. Here are speedtest results from airvpn internal test. Im in the northeast testing with a wired connection Down: 13.033 Mbit/s Out, 0.868 Mbit/s In (6%), 20MB - Up: 3.092 Mbit/s Out, 2.596 Mbit/s In (83%), 20MB - Date: Fri, 23 Oct 2015 14:50:19 GMT - Buffers: 20MB/20MB - Laps: 3, Time: 472.57 secs Im on a 45/5Mbit/s connection and would max it out on Alkaid before it went down. Im using the same server config on 443 UDP Quote Share this post Link to post
go558a83nk 364 Posted ... try some other servers. your ISP transit/peering to Metallah may only allow for slow speeds. I know with my ISP most routes seem subject to throttling but a few are wide open. maybe you were/are lucky with the Chicago servers. Quote Share this post Link to post
BDK2015 2 Posted ... It's unlikely it your ISP is throttling you, but you can try connecting via SSL or SSH, this will slow your connection down a little but it will ensure you do not get throttled and your ISP will be unable to see that you are connected to a VPN (I'd reccomend SSL over SSH as it looks like normal HTTPS traffic). However, try Canada servers as they are not too far from the North East (you should have a 50-75ms ping). Quote Share this post Link to post
go558a83nk 364 Posted ... It's unlikely it your ISP is throttling you, but you can try connecting via SSL or SSH, this will slow your connection down a little but it will ensure you do not get throttled and your ISP will be unable to see that you are connected to a VPN (I'd reccomend SSL over SSH as it looks like normal HTTPS traffic). However, try Canada servers as they are not too far from the North East (you should have a 50-75ms ping). it's quite common for ISPs to throttle openvpn and will be more common in the future. and like I said it may depend on the route. ISPs negotiate routing onto the different networks thus not all network traversal is equal. Quote Share this post Link to post