Jump to content
Not connected, Your IP: 18.117.70.64
metalbew

im trying to buy router for dd-wrt help?

Recommended Posts

So i installed dd-wrt on my old router i had laying around, sad to say open vpn wasnt on it.

 

so i am looking for a cheap router that is capable of the mega dd-wrt firmware or just the openvpn firmware.

 

i am only going to be using the openvpn client but i seen a lot of router that dont have just the openvpn but the mega.

 

can anyone tell me a cheap price on a router that is capable of ddwrt with at least 8mb flash.

 

And also a good internet speed while using the vpn

Share this post


Link to post

But you know vpn is Slower on Router on ac68u i get 2.200-2.800kbs max

Share this post


Link to post

But you know vpn is Slower on Router on ac68u i get 2.200-2.800kbs max

 

what?  you're doing something wrong then.  my AC68 can do 50mbit/s with merlin-asus firmware.

Share this post


Link to post

this is something sim to what i would ruin if i wanted cheap:

http://www.ebay.com/itm/Dell-Poweredge-R200-Xeon-E3110-Dual-Core-3-0GHz-4GB-250GB-7-2K-SATA-HDD-Rails-/111397768721?pt=COMP_EN_Servers&hash=item19efd30e11

 

i would slap OpenBSD or Hardened BSD on it.if your not up for the learning curve pfsense and or opensence might be your best opp. id kill my self over using a old router for a fw just my opinion

 

if u go with pfsense i would advise not using the guide on air its meh any way take care hope u fig it out

 

<br>

Edit:

<br>

i see that this is not the server i would use there was one i seen with ecc ram i would look for that one i dont have time to find it my self atm sorry this server is still good though. (i think its even cheaper then that server sorry i ran out of time)

Share this post


Link to post

you could use tp link routers ,,, see ddwrt page, some start at 25+ at amazon. i use ie wdr3600 np noticed so far,,,,

Share this post


Link to post

this is something sim to what i would ruin if i wanted cheap:

http://www.ebay.com/itm/Dell-Poweredge-R200-Xeon-E3110-Dual-Core-3-0GHz-4GB-250GB-7-2K-SATA-HDD-Rails-/111397768721?pt=COMP_EN_Servers&amp;hash=item19efd30e11

 

i would slap OpenBSD or Hardened BSD on it.if your not up for the learning curve pfsense and or opensence might be your best opp. id kill my self over using a old router for a fw just my opinion

 

if u go with pfsense i would advise not using the guide on air its meh any way take care hope u fig it out

 

<br>

Edit:

<br>

i see that this is not the server i would use there was one i seen with ecc ram i would look for that one i dont have time to find it my self atm sorry this server is still good though. (i think its even cheaper then that server sorry i ran out of time)

thanks i just got a linksys e2500 it has 5ghz wifi and im the only one that uses wired and we have fire tv stick so it would make streaming even better

 

yea i thought pf sense would help more but i dont have an old pc to put it on and im saving up money instead of buy a router from pfsense

 

thank you for you advice though i really appreciate it

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...