multiple split network configuration

[Ausfahrt 1]

I'm using a 4 port RT-N16 Toastman build VPN, VLAN version router. 

Netgear 24port switch

Linux machines

2 streaming media players, playstations

 

 

I want to split the network up into 3 segments.  192.168.1.x, 192.168.2.x, 192.68.3.x

 

*Important* - I don't want any segment on the network to be able to speak to each other. 

 

Segment 1 and 2 - I want to Tunnel through the VPN via network manager on the Linux machines using SSL Port 443.  These connections have 13 ports to connect through on the switch. 0/01, 0/02, 0/03.....0/013

 

On 1 segment -  I want to go through the VPN to America via the a Tomato router configuration using Client 1.  I don't care what port I use.  These connections will have 6 ports to connect through the switch. 0/14, 0/15, 0/16......0/19, 0/20

 

 

 

I've been at this for a 2 good solid days manipulating scripts, manual configurations through the GUI on tomato, etc. I like to figure things out myself, and I've learned alot, but i think it's time I asked for some help.  Anyone have an idea how to do this? 

 

Greatly appreciate your input! 

 

 

 

 

 

[Ausfahrt 1]

****STATUS UPDATE********  Iguess I should of mentioned what I did.

 

I got the network divided up into 3 segments on 3 seperate VLANS

 

bro-192.168.1.1/24 dhcp enabled Port 1 on Vlan 1

 

br1-192.168.2.1/24 dhcp enabled Port 2 on on Vlan2

 

br2-192.168.3.1/24 dhcp enabled Port 3 on Vlan3

 

vlan4 WAN

 

Id did a ifconfig on all ports on the router and Im getting the correct IP addresses

 

 

Heres the problem:  I can connect to the VPN through Tomato on the default Br0 192.168.1.1 LAN BUT  I can't connect to the VPN or get internet access from 192.168.2.1 or 192.168.3.1.

 

 

 It's as if I need some kind of route from 192.168.2.1 and 192.168.3.1 to the default gateway.  I played around with static routes destination 192.168.2.1 to gateway, but I couldnt get internet access. Obiously im doing something wrong..lol

 

 

Also, I have no problem connecting to the VPN from those ip addresss, as long as I turn VPN off on the router and  connect directly from openvpn on my linux machines

 

So obviously, this is a Tomato Router configuration error.....

 

ANyone, know how to configure Tomato -  br1 and br2 to connect to the internet?   or possibly a script?  this is driving me insane.

[Ausfahrt 1]

Update:  Havent figured it out....

 

Anyone know how to do this?

[PsychoWolf 16]

See my reply to your other thread here: https://airvpn.org/topic/11963-how-do-you-get-vlan2-br1-to-connect-to-the-vpn/?p=24411

 

Old thread I know, but answers are good to have on these threads for other people searching to do similar things.