Can I use any VPN Client IP when configuring Wireguard in QNAP Client

[DarkKman 2]

Hi folks. I don't know if this is a silly question but I am already using a WireGuard custom config generated file for use in my QNAP VPN. I filter only on Netherlands servers for my purposes however I would like to set up the same again for UK specific VPN but the IP provided in the config file comes up as "already in use" e.g. 10.x.x.x/32. Can I just change the IP to something else or is this specific to AirVPN (I had assumed this was an internal IP so surely I can use another range if its available?).

I'm not so Network savvy so apologies if this is obvious or if there is a simple workaround.

Hope you can help.

Thanks,
Happy AirVPN user

[SurprisedItWorks 53]

That "internal IP" is part of the data contained in the "device" you chose when you created the config file you are using for your NL setup. You need a different one for your UK setup, so the thing to do is to go into the AirVPN website Client Area, go to the VPN Devices page, add a new device with a name that makes sense to you. Then create your UK wireguard config again but this time specifying the new device name at the appropriate step.