Jump to content
Not connected, Your IP: 18.227.49.73
Jommes

ANSWERED AirVPN with Gluetun docker and OpenVPN, certificate error

Recommended Posts

Yesterday i set up a docker container with Gluetun en QBittorrent on my DS920+
I tried it with Wireguard over UDP and it works. But my Ubuntu test torrent had very slow download speeds. I saw that when i use the VPN on my laptop via UDP that my connection had hickups. It wasn't stable an very slow. I remembered that my ISP has an issue with UDP and OpenVPN. When i use OpenVPN with TCP it works fine.
But AirVPN only works with UDP in combination with Wireguard. So i have no other option to use OpenVPN with tcp.
I changed my compose-file, but when i start Gluetun i get this errors:
 
2023-04-03T13:52:36+02:00 INFO [openvpn] OpenSSL: error:05800074:x509 certificate routines::key values mismatch
2023-04-03T13:52:36+02:00 INFO [openvpn] Cannot load private key file [[INLINE]]
2023-04-03T13:52:36+02:00 INFO [openvpn] SIGUSR1[soft,private-key-password-failure] received, process restarting
2023-04-03T13:52:42+02:00 INFO [healthcheck] program has been unhealthy for 6s: restarting VPN (see https://github.com/qdm12/gluetun/wiki/Healthcheck)
2023-04-03T13:52:42+02:00 INFO [vpn] stopping
 
This is my compose:
 
#gluetun
gluetun:
image: qmcgaw/gluetun
container_name: gluetun
cap_add:
- NET_ADMIN
devices:
- /dev/net/tun:/dev/net/tun
ports:
- 8888:8888/tcp # HTTP proxy
- 8388:8388/tcp # Shadowsocks
- 8388:8388/udp # Shadowsocks
- 8090:8090 # port for qbittorrent
- 34671:34671
volumes:
- /volume1/docker/gluetun:/gluetun
environment:
- VPN_SERVICE_PROVIDER=airvpn
- VPN_TYPE=openvpn
- PROTOCOL=tcp
- OPENVPN_USER=username
- OPENVPN_PASSWORD=password
- FIREWALL_VPN_INPUT_PORTS=34671
- SERVER_REGIONS=Europe
- TZ=Europe/Paris
- HTTPPROXY=on
- SHADOWSOCKS=on
- FIREWALL_OUTBOUND_SUBNETS=172.19.0.0/16,192.168.1.0/24
network_mode: vpn-stack
restart: unless-stopped
 
In /volume1/docker/gluetun:/gluetun i placed a client.crt and client.key file from this instructions: https://github.com/qdm12/gluetun/wiki/OpenVPN-client-key and  and i extracted them from the OVPN config file a generated from the config generator.
client.key contents:
 
-----BEGIN PRIVATE KEY-----
Very long key
-----END PRIVATE KEY-----
 
client.crt contents (in my AirVPN OVPN file i saw 2 certificates):
 
 
-----BEGIN CERTIFICATE-----
Very long key
-----END CERTIFICATE-----
</ca>
<cert>
-----BEGIN CERTIFICATE-----
Very long key 2
-----END CERTIFICATE-----
 
When i use one certificate, i get the same error. Can somebody help me out?

Share this post


Link to post
4 hours ago, Jommes said:

But AirVPN only works with UDP in combination with Wireguard


Correction: Wireguard itself works UDP-only. It's independent from the VPN provider.
 
4 hours ago, Jommes said:

client.crt contents (in my AirVPN OVPN file i saw 2 certificates):


I think this is where it hiccups. The instructions ask for the <cert> part only but you included the <ca> part, too. Moreover, <ca> is the first key appearing, so OpenVPN likely tries to use that as the <cert>, and logically fails because of a modulus mismatch. The instructions for AirVPN don't mention the CA cert being used.
 
4 hours ago, Jommes said:

When i use one certificate, i get the same error. Can somebody help me out?


Now it only depends which one you used. Can you make sure you used the <cert>?

NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT.

LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too!

Want to contact me directly? All relevant methods are on my About me page.

Share this post


Link to post

Okay, it's in Wireguard itself.
Many thanks! I had selected the <ca> and i need the <cert> after changing everything works!
I had to look in the logs to see if Gluetun uses TCP, and it does. A test-torrent go's very slow, when i test another Linux test-torrent it go's with almost the max of my downloadspeed.

Share this post


Link to post
Guest
This topic is now closed to further replies.

×
×
  • Create New...