wireguard windows 10 client - how can i still access my local network / i.e. nas when the vpn is on

[kyrusdemnati 1]

with openvpn client and airvpn running, i can still access my nas on the local network i.e. 192.168.0.80
but when i run wireguard client, i can't access my local network connections - please advise?

thanks

[Flx 76]

13 hours ago, kyrusdemnati said:

but when i run wireguard client, i can't access my local network connections - please advise?

Set your AllowedIPs as this "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1". Now check if you can connect to your NAS-box.
If "Block untunneled traffic" is selected all local network traffic/access will be blocked. As well access to already NAS re-mapped drives.

[kyrusdemnati 1]

On 2/25/2022 at 10:56 PM, Flx said:

Set your AllowedIPs as this "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1". Now check if you can connect to your NAS-box.
If "Block untunneled traffic" is selected all local network traffic/access will be blocked. As well access to already NAS re-mapped drives.

oh brill it worked
i can use wireguard vpn client and access my local network drives/mapped drives from nas.

[Artur1990 0]

On 2/25/2022 at 11:56 PM, Flx said:

Set your AllowedIPs as this "AllowedIPs = 0.0.0.0/1, 128.0.0.0/1". Now check if you can connect to your NAS-box.
If "Block untunneled traffic" is selected all local network traffic/access will be blocked. As well access to already NAS re-mapped drives.

That didn't work out for me. 

[Flx 76]

23 hours ago, Artur1990 said:

That didn't work out for me. 

OK...what part of it didn't work for you?

[Stalinium 44]

@Flx won't 0.0.0.0/1 and 128.0.0.0/1 SEND ALL traffic without the VPN?
see the response below For local networks you want to only add the network you need: AllowedIPs = 192.168.0.0/24  should only add 192.168.0.x Edited ... by Stalinium
Flx's answer

[Flx 76]

1 hour ago, Stalinium said:

you need: AllowedIPs = 192.168.0.0/24  should only add 192.168.0.x

Something like this: "0.0.0.0/1, 128.0.0.0/1, 192.168.2.0/24"?
and then you get this in the log:
2022-06-09 20:32:52.063545: [TUN] [wire1new_Sargas_UDP-47107] Handshake for peer 1 (184.75.223.194:47107) did not complete after 5 seconds, retrying (try 2)
2022-06-09 20:32:52.063545: [TUN] [wire1new_Sargas_UDP-47107] Sending handshake initiation to peer 1 (184.75.223.194:47107)
2022-06-09 20:32:56.945294: [TUN] [wire1new_Sargas_UDP-47107] Retrying handshake with peer 1 (184.75.223.194:47107) because we stopped hearing back after 15 seconds

[Flx 76]

@Stalinium
To unconfuse you'll also need some firewall rule set for Wireguard.exe such as this:
 

[Flx 76]

@StaliniumComodo config files Windows 7 and Windows 10 are already posted(last-link below) @OpenSorcerer request to re-post them. Have a lot of fun