umbeVPN 0 Posted ... Hi all, I'm new to Linux and I'm trying to install Eddie for desktop on a machine with architecture arm64 and Armbian Linux. So, after many troubles with the dependencies, I managed to install the Eddie experimental version 2.20.0 (providing the commands in the terminal). I can see the Eddie icon between the installed software, but when I click on it, it does not start. I tried to write eddie-ui in the terminal, but it provides this umbe@arm-64:~$ eddie-ui Gtk-Message: 16:19:37.648: Failed to load module "gail" ** (mono:45754): WARNING **: 16:19:37.713: (../atk-adaptor/bridge.c:1018):atk_bridge_adaptor_init: runtime check failed: (root) at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <728fbd68fe594062895e1f819791e76a>:0 at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap..ctor(System.Drawing.Image,System.Drawing.Size) at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip..ctor(System.Windows.Forms.Control) at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at Eddie.Forms.Form..ctor () [0x00000] in <46cc029634384b5c94f6b3babb3eff47>:0 at Eddie.Forms.Forms.WindowSplash..ctor () [0x00000] in <46cc029634384b5c94f6b3babb3eff47>:0 at (wrapper remoting-invoke-with-check) Eddie.Forms.Forms.WindowSplash..ctor() at Eddie.Forms.UiClient.Init (System.String environmentCommandLine) [0x0001e] in <46cc029634384b5c94f6b3babb3eff47>:0 at Eddie.Forms.Linux.Program.Main () [0x00089] in <fa7df81f0a8b4782926a44fe63f1975f>:0 [ERROR] FATAL UNHANDLED EXCEPTION: System.ArgumentException: A null reference or invalid value was found [GDI+ status: InvalidParameter] at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <728fbd68fe594062895e1f819791e76a>:0 at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap..ctor(System.Drawing.Image,System.Drawing.Size) at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip..ctor(System.Windows.Forms.Control) at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm..ctor(System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at Eddie.Forms.Linux.Program.Main () [0x000a1] in <fa7df81f0a8b4782926a44fe63f1975f>:0 Unluckily, I have no idea of what it means... Can anyone help me, please? Quote Share this post Link to post
OpenSourcerer 1435 Posted ... 5 hours ago, umbeVPN said: umbe@arm-64:~$ eddie-ui Gtk-Message: 16:19:37.648: Failed to load module "gail" ** (mono:45754): WARNING **: 16:19:37.713: (../atk-adaptor/bridge.c:1018):atk_bridge_adaptor_init: runtime check failed: (root) First, did you run Eddie as root? Doesn't look like it, and both the warning message and the $ in the prompt without at least a sudo hint at this. Second, are you running a graphical environment? If not, eddie-ui --cli is the only option you have. Calling eddie-ui launches Eddie with GUI. Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
umbeVPN 0 Posted ... (edited) 17 hours ago, OpenSourcerer said: Second, are you running a graphical environment? If not, eddie-ui --cli is the only option you have. Calling eddie-ui launches Eddie with GUI. Thanks for your answer, I'm running armbian on a tv box connected to a monitor. Moving to root and writing eddie-ui in the terminal provides a similar error root@arm-64:~# eddie-ui at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <728fbd68fe594062895e1f819791e76a>:0 at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap..ctor(System.Drawing.Image,System.Drawing.Size) at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip..ctor(System.Windows.Forms.Control) at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at Eddie.Forms.Form..ctor () [0x00000] in <46cc029634384b5c94f6b3babb3eff47>:0 at Eddie.Forms.Forms.WindowSplash..ctor () [0x00000] in <46cc029634384b5c94f6b3babb3eff47>:0 at (wrapper remoting-invoke-with-check) Eddie.Forms.Forms.WindowSplash..ctor() at Eddie.Forms.UiClient.Init (System.String environmentCommandLine) [0x0001e] in <46cc029634384b5c94f6b3babb3eff47>:0 at Eddie.Forms.Linux.Program.Main () [0x00089] in <fa7df81f0a8b4782926a44fe63f1975f>:0 [ERROR] FATAL UNHANDLED EXCEPTION: System.ArgumentException: A null reference or invalid value was found [GDI+ status: InvalidParameter] at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x0009b] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Int32 width, System.Int32 height, System.Drawing.Imaging.PixelFormat format) [0x00017] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Int32 width, System.Int32 height) [0x00000] in <728fbd68fe594062895e1f819791e76a>:0 at System.Drawing.Bitmap..ctor (System.Drawing.Image original, System.Drawing.Size newSize) [0x00010] in <728fbd68fe594062895e1f819791e76a>:0 at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap..ctor(System.Drawing.Image,System.Drawing.Size) at System.Windows.Forms.XplatUIX11.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x0004e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.XplatUI.DefineCursor (System.Drawing.Bitmap bitmap, System.Drawing.Bitmap mask, System.Drawing.Color cursor_pixel, System.Drawing.Color mask_pixel, System.Int32 xHotSpot, System.Int32 yHotSpot) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor.CreateCursor (System.IO.Stream stream) [0x00058] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursor..ctor (System.Type type, System.String resource) [0x00021] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Cursors.get_SizeNWSE () [0x0001a] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.SizeGrip..ctor (System.Windows.Forms.Control CapturedControl) [0x00006] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.SizeGrip..ctor(System.Windows.Forms.Control) at System.Windows.Forms.ScrollableControl.CreateScrollbars () [0x000c2] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x000b0] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm..ctor(System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <a3daa9b84fd241a497578a25f68bc3c7>:0 at Eddie.Forms.Linux.Program.Main () [0x000a1] in <fa7df81f0a8b4782926a44fe63f1975f>:0 while if I type eddie-ui --cli it suggest to write eddie-ui --cli -login=mynick -password=mypassword with my credentials. I tried and, at least on the terminal, eddie manage to start. As suggested in the terminal, I wrote N and the connection was established (tested with ipleaks.net). However, I'd rather to run eddie with the GUI, especially for setting the preferences...is there any way to do that? As I mentioned, there is no response when I press on the icon and I have no idea of what I should do... Edited ... by umbeVPN Quote Share this post Link to post
OpenSourcerer 1435 Posted ... $ mono --version 2 hours ago, umbeVPN said: Thanks for your answer, I'm running armbian on a tv box connected to a monitor. That doesn't really answer the question. A headless system will be able to use the monitor, too, that doesn't mean it can draw windows. Are you running a desktop environment like xfce or not? Or asked this way: When you flashed Armbian, did you choose an ISO with "desktop" in its name or one without? Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
umbeVPN 0 Posted ... 2 hours ago, OpenSourcerer said: $ mono --version Mono JIT compiler version 6.8.0.105 (Debian 6.8.0.105+dfsg-3 Wed Apr 8 15:21:28 UTC 2020) Copyright (C) 2002-2014 Novell, Inc, Xamarin Inc and Contributors. www.mono-project.com TLS: __thread SIGSEGV: normal Notifications: epoll Architecture: arm64 Disabled: none Misc: softdebug Interpreter: yes LLVM: supported, not enabled. Suspend: preemptive GC: sgen (concurrent by default) I'm sorry, I still have everything to learn about Linux and I'm grateful for your help. The iso that I used is named "Arbian_20.10_Arm-64_bullseye_current_5.9.0_desktop", and the command echo $XDG_CURRENT_DESKTOP returns XFCE, so I'd say that I have a graphical environment running. Quote Share this post Link to post
OpenSourcerer 1435 Posted ... 13 hours ago, umbeVPN said: The iso that I used is named "Arbian_20.10_Arm-64_bullseye_current_5.9.0_desktop", and the command echo $XDG_CURRENT_DESKTOP returns XFCE, so I'd say that I have a graphical environment running. Perfect, this answers the question perfectly. Can you please execute this: $ mono-test-install . Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
umbeVPN 0 Posted ... 9 hours ago, OpenSourcerer said: $ mono-test-install The terminal does not return an answer but suggests to execute instead sudo apt install mono-devel which is what I successively wrote. It returned a very long report with many messages of "no space left on the device", despite I still have a lot of free memory. This is the last part of the report: 129 new root certificates were added to your trust store. Import process completed. Done done. dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device Setting up mono-devel (6.8.0.105+dfsg-3) ... dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device update-alternatives: using /usr/bin/mono-csc to provide /usr/bin/cli-csc (c-shar p-compiler) in auto mode update-alternatives: using /usr/bin/resgen to provide /usr/bin/cli-resgen (resou rce-file-generator) in auto mode update-alternatives: using /usr/bin/al to provide /usr/bin/cli-al (assembly-link er) in auto mode update-alternatives: using /usr/bin/sn to provide /usr/bin/cli-sn (strong-name-t ool) in auto mode dpkg: cannot write to log file '/var/log/dpkg.log': No space left on device E: Write error - ~LZMAFILE (28: No space left on device) Now, when I write mono-test-install the terminal returns Active Mono: /usr/bin/mono Other Mono executables: /bin/mono You have a working System.Drawing setup Unhandled Exception: System.NullReferenceException: Object reference not set to an instance of an object at Program.Main () [0x00016] in <1af6cc060e10455b9c2cdf1d311b5539>:0 [ERROR] FATAL UNHANDLED EXCEPTION: System.NullReferenceException: Object reference not set to an instance of an object at Program.Main () [0x00016] in <1af6cc060e10455b9c2cdf1d311b5539>:0 I'm sorry to bother you with these problems... Do you think that the issue that I'm encountering with eddie is something that can be solved or I should try to use another linux distro? Quote Share this post Link to post
OpenSourcerer 1435 Posted ... Neither. Install the complete Mono framework to be sure it's not a matter of missing libraries: # apt-get install mono-complete . Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
umbeVPN 0 Posted ... On 4/8/2021 at 11:41 AM, OpenSourcerer said: # apt-get install mono-complete Ok, I installed the complete framework but mono-test-install returns the same answer. Anyway, I red the eddie-cli manual and I managed to provide on the terminal the settings that I intended to set through the GUI, therefore the situation right now is not so bad for my needs. If you have other suggestions I'll be happy to give them a try, otherwise I thank you very much for your help, I discovered another way to get the VPN working thanks to you! Quote Share this post Link to post
OpenSourcerer 1435 Posted ... Interestingly, I get a similar error when I run the test tool… might be a bug with it. Does eddie-ui work now after installation of the complete framework? Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
umbeVPN 0 Posted ... I got great news! At the beginning eddie-ui did not work even after the installation of the complete framework. For other reasons, I executed sudo apt --fix-broken install and installed xrdp (I was looking for remore control) following these instructions. Now, I don't know which is the reason between these two, but now eddie-ui starts simply by clicking on the icon! I managed to login, insert my settings and everything else through the GUI. Finally the problem is solved. Again, thank you very much for your help @OpenSourcerer, I'm very grateful for the support provided. Quote Share this post Link to post
OpenSourcerer 1435 Posted ... Oh. This comes closest to what it might have been: install xserver-xorg-core package Install xsrever-xorg-input-all package install xorgxrdp package The core package missing is the most probable cause – and also the most improbable, because how can xfce start without Xorg core files? Input files missing doesn't make sense, the stack trace above points at a problem drawing the window, not accepting input. xorgxrdp is only for xrdp support, and why should Eddie use that. Riddles in the dark… Glad that it works for you now. Enjoy Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
Not connected, Your IP: 18.220.112.210
Online: 25931 users - 328641 Mbit/s total BW