Jump to content
Not connected, Your IP: 3.149.24.70
swampdog

Exception when closing Eddie (debian 10) - possibly nftables syntax

Recommended Posts

Hi,

When I close Eddie (just clicking the x in the top-right), I get an exception: See log excerpt below

This happens with 2.19.7 and the new 2.20.0, but seems ok if iptables in 'network lock' is selected. Looks like it is an nftables issue.

. 2021.03.19 08:19:49 - Shutdown in progress
. 2021.03.19 08:19:51 - Deactivation of Network Lock
E 2021.03.19 08:19:51 - Exception: nft issue: exit:1; out:; err:/tmp/eddie_tmp_netlock_nftables_backup.nft:70:57-64: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp icmpv6 type  ip6 hoplimit 255 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:71:57-64: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp icmpv6 type  ip6 hoplimit 255 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:72:73-79: Error: syntax error, unexpected counter
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:73:73-79: Error: syntax error, unexpected counter
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:74:73-79: Error: syntax error, unexpected counter
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:75:73-79: Error: syntax error, unexpected counter
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:76:57-64: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp icmpv6 type  ip6 hoplimit 255 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:77:57-64: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp icmpv6 type  ip6 hoplimit 255 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:78:77-84: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  ip6 hoplimit 1 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
E 2021.03.19 08:19:51 -     /tmp/eddie_tmp_netlock_nftables_backup.nft:79:77-84: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp ip6 saddr fe80::/10 icmpv6 type  ip6 hoplimit 1 counter packets 0 bytes 0 accept
E 2021.03.19 08:19:51 -     ^^^^^^^^
. 2021.03.19 08:19:51 - Shutdown complete
. 2021.03.19 08:19:53 - Issue with the tray icon: Thread was being aborted.

Thanks.

Share this post


Link to post

Hello to all,

I am getting the same exception when I deactivate Network Lock.
My system is MX21 / Kernel 5.10.12 / Init: systemd / Debian 11 base code.

E 2021.03.19 08:19:51 - Exception: nft issue: exit:1; out:; err:/tmp/eddie_tmp_netlock_nftables_backup.nft:70:57-64: Error: syntax error, unexpected hoplimit, expecting newline or semicolon
E 2021.03.19 08:19:51 -     meta l4proto ipv6-icmp icmpv6 type  ip6 hoplimit 255 counter packets 0 bytes 0 accept

Checking UFW status shows "disabled" after deactivating Network Lock. It should show "enabled" when Network Lock is disabled assuming I have enabled UFW before running Eddie.


 

Share this post


Link to post

Cannot reproduce with 2.21.5 beta on Arch Linux. Activation and deactivation with both options, nftables and iptables-legacy, works as intended. Can you try that?


NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT.

LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too!

Want to contact me directly? All relevant methods are on my About me page.

Share this post


Link to post

Tried with 2.21.5 but had same issues.

The solution for me was to completely disable ufw and enable nftables at boot. Then set my default firewall rules as I like using only nftables.
Now, eddie ver 2.20.0 works as expected.
 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...