Jump to content
Not connected, Your IP: 54.172.234.236
Sign in to follow this  
Substandard IQ

ANSWERED TAP/TUN Interface won't come up

Recommended Posts

I am attempting to run Eddie the AirVPN client on my Server 2016 box.

 

I have tried version 2.17.2, 2.16.3, 2.15.2, 2.13.6

 

Each version exhibits the same symptoms, the logs show the TAP Adapter is not launching correctly.

 

. 2018.10.24 18:49:26 - Eddie Windows Interface Hack executed (Ethernet 3)
. 2018.10.24 18:49:27 - OpenVPN > TEST ROUTES: 0/0 succeeded len=-1 ret=0 a=0 u/d=down
. 2018.10.24 18:49:27 - OpenVPN > Route: Waiting for TUN/TAP interface to come up..
 

It will loop this error over and over again until it gives up.

 

I have tried uninstalling the TAP drivers and reinstalling them. I have tried uninstalling the client and TAP drivers and rebooting. I have tried multiple versions of the client. I have tried using IPv4 only in Eddie, my NICs, and the TAP NIC.

 

However I can get the tunnel to complete by disabling the TAP adapter ahead of time. The client will force a re-installation of the driver and the tunnel will connect. However I have not internet access even though the tunnel is active, it's like the network locking component is in place like it should be but I can't seem to transmit my traffic through the VPN tunnel.

 

I am out of ideas so I will post my logs here. (Logs Retracted)

 

I have also tried setting the TAP adapter to always be on.

 

I will attach some of the more advanced debugging logs. (Logs Retracted)

 

If anybody can notice anything I am missing, I would appreciate it.

Edited ... by Substandard IQ

Share this post


Link to post

Basically I had no idea what was wrong with my TAP adapter but I knew it was software related. So I just reset all of my NICs. This seems to have corrected my issue

 

netsh winsock reset catalog
netsh int ipv4 reset

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image
Sign in to follow this  

×
×
  • Create New...