aquax 1 Posted ... I wanted to install airvpn software on a linux terminal, but I can't find any tutorials or even commands that I should run, I'm a beginner so I don't know how should I do it without tutorial. I searched around and there is nothing that helped. I don't want to mess around through ftp and move .deb packages to linux, is there a way to run one command and do it all? I read some discussions here and I suppose those people who downloaded openvpn configs had graphical interface. The only thing I did was Import our maintainer key for validating signature: wget -qO - https://eddie.website/repository/keys/eddie_maintainer_gpg.key|sudo apt-key add - Couldn't run deb commands because I don't have the deb package. deb http://eddie.website/repository/apt stable main -bash: deb: command not found sudo apt-get install deb Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package deb I tried to download linux > 64bit > portable > command line, but again, it's just a tar.gz file, there are no commands on how to do it via ssh. Tried to download deb package remotely via SSH, but the link is encrypted or dynamic and not a direct link, also showing error 500...It seems in the past there were direct links (https://askubuntu.com/questions/825193/how-can-apt-get-deal-with-dependency-problems-associated-with-a-slightly-problem) /home# wget https://eddie.website/download/?platform=linux&arch=x64&ui=cli&format=portable.tar.gz&version=2.12.4&r=0.8266051129146859 [1] 28514 [2] 28515 [3] 28516 [4] 28517 [5] 28518 [2] Done arch=x64 [3] Done ui=cli [4]- Done format=portable.tar.gz [5]+ Done version=2.12.4 root@...:~/home# --2017-07-04 02:22:53-- https://eddie.website/download/?platform=linux Resolving eddie.website (eddie.website)... 2a03:b0c0:2:d0::11b4:6001, 188.166.41.48 Connecting to eddie.website (eddie.website)|2a03:b0c0:2:d0::11b4:6001|:443... connected. HTTP request sent, awaiting response... 500 Internal Server Error 2017-07-04 02:22:53 ERROR 500: Internal Server Error. There are like 10 dependencies for this to run and not one command or guide on how to install airvpn easily via terminal... I have to waste my time to reupload .deb file on some file hosting now to download it by using wget... Instead of 5 minutes this will take me 1 hour now... ~/home# apt-get install gksu mono-runtime mono-utils libmono-system-runtime2.0-cil libmono-winforms2.0-cil libmono-corlib2.0-cil openvpn stunnel4 Reading package lists... Done Building dependency tree... 50% Building dependency tree Reading state information... Done Package libmono-corlib2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel Package libmono-system-runtime2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel Package libmono-winforms2.0-cil is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: mono-reference-assemblies-2.0 mono-devel E: Package 'libmono-system-runtime2.0-cil' has no installation candidate E: Package 'libmono-winforms2.0-cil' has no installation candidate E: Package 'libmono-corlib2.0-cil' has no installation candidate Doing this from this tutorial https://askubuntu.com/a/80593 /home# tar xvzf eddie-cli_2.12.4_linux_x64_portable.tar.gz eddie-cli_2.12.4_linux_x64_portable/ eddie-cli_2.12.4_linux_x64_portable/libgdiplus.so.0 eddie-cli_2.12.4_linux_x64_portable/openvpn eddie-cli_2.12.4_linux_x64_portable/cacert.pem eddie-cli_2.12.4_linux_x64_portable/update-resolv-conf eddie-cli_2.12.4_linux_x64_portable/stunnel eddie-cli_2.12.4_linux_x64_portable/eddie-cli eddie-cli_2.12.4_linux_x64_portable/libMonoPosixHelper.so root@...:~/home# ./configure -bash: ./configure: No such file or directory root@...:~/home# cd eddie-cli_2.12.4_linux_x64_portable root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# ./configure -bash: ./configure: No such file or directory tar -xzf eddie-cli_2.12.4_linux_x64_portable.tar.gz root@...:~/home# cd eddie-cli_2.12.4_linux_x64_portable root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# ./configure -bash: ./configure: No such file or directory root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# make make: *** No targets specified and no makefile found. Stop. root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# sudo make install make: *** No rule to make target 'install'. Stop. root@...:~/home/eddie-cli_2.12.4_linux_x64_portable# I installed .deb with a UI - there were no .deb without UI, hoping that it also can work only via command line. This is the error I got when running it, I suppose it's only for graphical UI ('Could not open display') sudo dpkg -i --ignore-depends=libmono-system-runtime2.0-cil --ignore-depends=libmono-winforms2.0-cil --ignore-depends=libmono-corlib2.0-cil eddie-ui_2.12.4_linux_x64_debian.deb Selecting previously unselected package airvpn. (Reading database ... 64452 files and directories currently installed.) Preparing to unpack eddie-ui_2.12.4_linux_x64_debian.deb ... Unpacking airvpn (2.12.4) ... Setting up airvpn (2.12.4) ... Processing triggers for man-db (2.7.6.1-2) ... Processing triggers for mime-support (3.60ubuntu1) ... root@...:~/home# airvpn I 2017.07.04 02:47:26 - Eddie client version: 2.12.4 / linux_x64, System: Linux, Name: Ubuntu 17.04 Linux generic #22-Ubuntu SMP Thu Apr 20 09:22:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Server : 546655 IPv4 : IPv6 : ... Hostname : ..., Mono/.Net Framework: v4.0.30319 . 2017.07.04 02:47:26 - Reading options from /root/.airvpn/AirVPN.xml . 2017.07.04 02:47:26 - Profile options not found, using defaults. Unhandled Exception: System.TypeInitializationException: The type initializer for 'System.Windows.Forms.WindowsFormsSynchronizationContext' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Windows.Forms.XplatUI' threw an exception. ---> System.ArgumentNullException: Could not open display (X-Server required. Check your DISPLAY environment variable) Parameter name: Display at System.Windows.Forms.XplatUIX11.SetDisplay (System.IntPtr display_handle) [0x00435] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11..ctor () [0x00077] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11.GetInstance () [0x0001c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUI..cctor () [0x0007d] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at System.Windows.Forms.Theme.get_MenuAccessKeysUnderlined () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.SystemInformation.get_MenuAccessKeysUnderlined () [0x00005] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x000ea] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.Control:.ctor () at System.Windows.Forms.WindowsFormsSynchronizationContext..cctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at (wrapper managed-to-native) System.Object:__icall_wrapper_mono_generic_class_init (intptr) at System.Windows.Forms.WindowsFormsSynchronizationContext.get_AutoInstall () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x00014] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at Eddie.UI.Linux.Program.Main () [0x000c3] in <827d8be374f3486292e08d514075969c>:0 [ERROR] FATAL UNHANDLED EXCEPTION: System.TypeInitializationException: The type initializer for 'System.Windows.Forms.WindowsFormsSynchronizationContext' threw an exception. ---> System.TypeInitializationException: The type initializer for 'System.Windows.Forms.XplatUI' threw an exception. ---> System.ArgumentNullException: Could not open display (X-Server required. Check your DISPLAY environment variable) Parameter name: Display at System.Windows.Forms.XplatUIX11.SetDisplay (System.IntPtr display_handle) [0x00435] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11..ctor () [0x00077] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUIX11.GetInstance () [0x0001c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.XplatUI..cctor () [0x0007d] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at System.Windows.Forms.Theme.get_MenuAccessKeysUnderlined () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.SystemInformation.get_MenuAccessKeysUnderlined () [0x00005] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x000ea] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.Control:.ctor () at System.Windows.Forms.WindowsFormsSynchronizationContext..cctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 --- End of inner exception stack trace --- at (wrapper managed-to-native) System.Object:__icall_wrapper_mono_generic_class_init (intptr) at System.Windows.Forms.WindowsFormsSynchronizationContext.get_AutoInstall () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Control..ctor () [0x00014] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ScrollableControl..ctor () [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.ContainerControl..ctor () [0x0000e] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.Form..ctor () [0x00012] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Boolean displayHelpButton) [0x0000c] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at System.Windows.Forms.MessageBox+MessageBoxForm..ctor (System.Windows.Forms.IWin32Window owner, System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at (wrapper remoting-invoke-with-check) System.Windows.Forms.MessageBox+MessageBoxForm:.ctor (System.Windows.Forms.IWin32Window,string,string,System.Windows.Forms.MessageBoxButtons,System.Windows.Forms.MessageBoxIcon) at System.Windows.Forms.MessageBox.Show (System.String text, System.String caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) [0x00000] in <d5b72d15d4f7424c8a1538e3f19ec2e3>:0 at Eddie.UI.Linux.Program.Main () [0x000c3] in <827d8be374f3486292e08d514075969c>:0 Edit: Just figured out that if I want to use command-line I have to add -cli... Under Linux, run airvpn with -cli option. https://airvpn.org/topic/11541-command-line-edition-and-syntax Edit2: After connecting to best available server, linux crashed.. Now can't connect. 17:40:55.181 Key exchange #36 started by client. 17:40:55.744 Key exchange #36 completed. 18:11:01.036 The SSH2 session has terminated with error. Reason: FlowSocketReader: Error receiving bytes. Windows error 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. 18:11:01.041 Automatic reconnection started. Reconnection attempt is scheduled at 18:11:03. This is the last log before crashing . 2017.07.04 03:16:39 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA . 2017.07.04 03:16:39 - OpenVPN > [server] Peer Connection Initiated with [AF_INET]... . 2017.07.04 03:16:40 - OpenVPN > SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) . 2017.07.04 03:16:40 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.113.245 255.255.0.0' . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: compression parms modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: route options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: route-related options modified . 2017.07.04 03:16:40 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified . 2017.07.04 03:16:40 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.07.04 03:16:40 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.07.04 03:16:40 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key . 2017.07.04 03:16:40 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication . 2017.07.04 03:16:40 - OpenVPN > ROUTE_GATEWAY .../255.255.255.0 IFACE=eth0 HWADDR=... . 2017.07.04 03:16:40 - OpenVPN > TUN/TAP device tun0 opened . 2017.07.04 03:16:40 - OpenVPN > TUN/TAP TX queue length set to 100 . 2017.07.04 03:16:40 - OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0 . 2017.07.04 03:16:40 - OpenVPN > /sbin/ip link set dev tun0 up mtu 1500 . 2017.07.04 03:16:40 - OpenVPN > /sbin/ip addr add dev tun0 .../16 broadcast ... . 2017.07.04 03:16:45 - OpenVPN > /sbin/ip route add .../32 via ... . 2017.07.04 03:16:45 - OpenVPN > /sbin/ip route add 0.0.0.0/1 via 10.4.0.1 Quote Share this post Link to post
cm0s 118 Posted ... hey aquax if you are wanting to do as much as you can through the terminal i'd suggest arch linuxit is basically 'generic linux'here's some notes i put together: https://splif.me/nstlz.html have a good one splif Quote Share this post Link to post
aquax 1 Posted ... hey aquax if you are wanting to do as much as you can through the terminal i'd suggest arch linuxit is basically 'generic linux'here's some notes i put together: https://splif.me/nstlz.html have a good one splif Everything is working now - I can launch airvpn, but when I connect to a server it crashes or blocks connection, so I have to restart completely. + Another problem because of this airvpn installation is this, even though I uninstalled airvpn, it caused some problems because of it's dependencies, it seems connection is not working anymore to anything outside the server... (Failed to establish a new connection: [Errno -3] Temporary failure in name resolution) Traceback (most recent call last): File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connection.py", line 138, in _new_conn (self.host, self.port), self.timeout, **extra_kw) File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/util/connection.py", line 75, in create_connection for res in socket.getaddrinfo(host, port, family, socket.SOCK_STREAM): File "/usr/lib/python3.5/socket.py", line 733, in getaddrinfo for res in _socket.getaddrinfo(host, port, family, type, proto, flags): socket.gaierror: [Errno -3] Temporary failure in name resolution During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connectionpool.py", line 594, in urlopen chunked=chunked) File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connectionpool.py", line 350, in _make_request self._validate_conn(conn) File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connectionpool.py", line 837, in _validate_conn conn.connect() File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connection.py", line 281, in connect conn = self._new_conn() File "/usr/share/python-wheels/urllib3-1.19.1-py2.py3-none-any.whl/urllib3/connection.py", line 147, in _new_conn self, "Failed to establish a new connection: %s" % e) requests.packages.urllib3.exceptions.NewConnectionError: <requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7f1169038208>: Failed to establish a new connection: [Errno -3] Temporary failure in name resolution Currently trying to uninstall every dependency that was installed for airvpn... sudo apt-get purge fontconfig libexif12 libgnome-keyring-common libgnome-keyring0 stunnel4 libjbig0 libxmuu1 psmisc xauth hicolor-icon-theme libtiff5 libgdk-pixbuf2.0-common libgdk-pixbuf2.0-0 gtk-update-icon-cache libcroco3 libthai-data libdatrie1 libthai0 libpango-1.0-0 libpangoft2-1.0-0 libpangocairo-1.0-0 librsvg2-2 librsvg2-common humanity-icon-theme ubuntu-mono adwaita-icon-theme libatspi2.0-0 libxtst6 at-spi2-core binfmt-support libmono-corlib4.5-cil libmono-system-xml4.0-cil libmono-system-security4.0-cil libmono-system-configuration4.0-cil libmono-system4.0-cil libmono-security4.0-cil mono-4.0-gac mono-gac mono-runtime-common mono-runtime-sgen mono-runtime ca-certificates-mono cli-common dbus-user-session libdconf1 dconf-service dconf-gsettings-backend gconf2-common libgconf-2-4 gconf-service-backend gconf-service gconf2 libgck-1-0 libgcr-3-common libgcr-base-3-1 libgtk-3-common libatk1.0-data libatk1.0-0 libatk-bridge2.0-0 libcairo-gobject2 liblcms2-2 libcolord2 libcontent-hub-glib0 libavahi-common-data libavahi-common3 libavahi-client3 libcups2 libepoxy0 libjson-glib-1.0-common libjson-glib-1.0-0 libproxy1v5 glib-networking-common glib-networking-services gsettings-desktop-schemas glib-networking libsoup2.4-1 libsoup-gnome2.4-1 librest-0.7-0 libxcomposite1 libgtk-3-0 libgcr-ui-3-1 gcr libgtk2.0-common libgtk2.0-0 libgtop2-common libgtop-2.0-10 libxcb-util1 libstartup-notification0 libgksu2-0 gksu p11-kit-modules p11-kit libsecret-common libsecret-1-0 pinentry-gnome3 gnome-keyring libgail18 libgail-common libgif7 libgdiplus libgdk-pixbuf2.0-bin libgtk-3-bin libgtk2.0-bin libmonosgen-2.0-1 libmonosgen-2.0-dev libmono-2.0-dev libmono-accessibility4.0-cil libmono-cairo4.0-cil libmono-cecil-private-cil libmono-posix4.0-cil libmono-system-core4.0-cil libmono-codecontracts4.0-cil libmono-compilerservices-symbolwriter4.0-cil libmono-cscompmgd0.0-cil libmono-csharp4.0c-cil libmono-custommarshalers4.0-cil libmono-data-tds4.0-cil libmono-system-transactions4.0-cil libmono-system-enterpriseservices4.0-cil libmono-system-numerics4.0-cil libmono-system-data4.0-cil libmono-db2-1.0-cil libmono-debugger-soft4.0a-cil libmono-sharpzip4.84-cil libmono-sqlite4.0-cil libmono-system-componentmodel-dataannotations4.0-cil libmono-system-drawing4.0-cil libmono-system-runtime-serialization-formatters-soap4.0-cil libmono-system-web-applicationservices4.0-cil libmono-webbrowser4.0-cil libmono-i18n4.0-cil libmono-i18n-west4.0-cil libmono-system-windows-forms4.0-cil libmono-system-design4.0-cil libmono-ldap4.0-cil libmono-system-ldap4.0-cil libmono-system-web-services4.0-cil libmono-system-web4.0-cil libmono-http4.0-cil libmono-i18n-cjk4.0-cil libmono-i18n-mideast4.0-cil libmono-i18n-other4.0-cil libmono-i18n-rare4.0-cil libmono-i18n4.0-all libmono-management4.0-cil libmono-messaging4.0-cil libmono-rabbitmq4.0-cil libmono-messaging-rabbitmq4.0-cil libmono-microsoft-build-framework4.0-cil libmono-microsoft-build4.0-cil libmono-microsoft-build-utilities-v4.0-4.0-cil libmono-microsoft-build-engine4.0-cil libmono-xbuild-tasks4.0-cil libmono-microsoft-build-tasks-v4.0-4.0-cil libmono-microsoft-csharp4.0-cil libmono-microsoft-visualc10.0-cil libmono-microsoft-web-infrastructure1.0-cil libmono-oracle4.0-cil libmono-parallel4.0-cil libmono-peapi4.0a-cil libmono-relaxng4.0-cil libmono-simd4.0-cil libmono-system-servicemodel-internals0.0-cil libmono-smdiagnostics0.0-cil libmono-system-componentmodel-composition4.0-cil libmono-system-configuration-install4.0-cil libmono-system-data-datasetextensions4.0-cil libmono-system-runtime-serialization4.0-cil libmono-system-xml-linq4.0-cil libmono-system-data-entity4.0-cil libmono-system-data-linq4.0-cil libmono-system-data-services-client4.0-cil libmono-system-identitymodel4.0-cil libmono-system-identitymodel-selectors4.0-cil libmono-system-messaging4.0-cil libmono-system-servicemodel4.0a-cil libmono-system-servicemodel-activation4.0-cil libmono-system-web-extensions4.0-cil libmono-system-servicemodel-web4.0-cil libmono-system-data-services4.0-cil libmono-system-deployment4.0-cil libmono-system-drawing-design4.0-cil libmono-system-dynamic4.0-cil libmono-system-io-compression4.0-cil libmono-system-io-compression-filesystem4.0-cil libmono-system-json4.0-cil libmono-system-json-microsoft4.0-cil libmono-system-ldap-protocols4.0-cil libmono-system-management4.0-cil libmono-system-net4.0-cil libmono-system-net-http4.0-cil libmono-system-net-http-formatting4.0-cil libmono-system-net-http-webrequest4.0-cil libmono-system-numerics-vectors4.0-cil libmono-system-reactive-interfaces2.2-cil libmono-system-reactive-core2.2-cil libmono-system-reactive-linq2.2-cil libmono-system-reactive-debugger2.2-cil libmono-system-reactive-experimental2.2-cil libmono-system-reactive-providers2.2-cil libmono-system-reactive-observable-aliases0.0-cil libmono-system-reactive-platformservices2.2-cil libmono-system-reactive-runtime-remoting2.2-cil libmono-system-reactive-windows-forms2.2-cil libmono-system-xaml4.0-cil libmono-windowsbase4.0-cil libmono-system-reactive-windows-threading2.2-cil libmono-system-reflection-context4.0-cil libmono-system-runtime4.0-cil libmono-system-runtime-caching4.0-cil libmono-system-runtime-durableinstancing4.0-cil libmono-system-runtime-interopservices-runtimeinformation4.0-cil libmono-system-servicemodel-discovery4.0-cil libmono-system-servicemodel-routing4.0-cil libmono-system-serviceprocess4.0-cil libmono-system-threading-tasks-dataflow4.0-cil libmono-system-web-abstractions4.0-cil libmono-system-web-dynamicdata4.0-cil libmono-system-web-extensions-design4.0-cil libmono-system-web-http4.0-cil libmono-system-web-http-selfhost4.0-cil libmono-system-web-http-webhost4.0-cil libmono-system-web-mobile4.0-cil libmono-system-web-razor2.0-cil libmono-system-web-webpages-deployment2.0-cil libmono-system-web-webpages2.0-cil libmono-system-web-webpages-razor2.0-cil libmono-system-web-mvc3.0-cil libmono-system-web-regularexpressions4.0-cil libmono-system-web-routing4.0-cil libmono-system-windows4.0-cil libmono-system-windows-forms-datavisualization4.0a-cil libmono-system-workflow-activities4.0-cil libmono-system-workflow-componentmodel4.0-cil libmono-system-workflow-runtime4.0-cil libmono-system-xml-serialization4.0-cil libmono-tasklets4.0-cil libmono-webmatrix-data4.0-cil libnunit-core-interfaces2.6.3-cil libnunit-core2.6.3-cil libnunit-util2.6.3-cil libnunit-console-runner2.6.3-cil libnunit-framework2.6.3-cil libnunit-mocks2.6.3-cil libnunit-cil-dev libmono-cil-dev libmonoboehm-2.0-1 libp11-kit-gnome-keyring libpam-gnome-keyring libpkcs11-helper1 mono-csharp-shell mono-mcs mono-xbuild mono-devel mono-reference-assemblies-2.0 mono-utils openvpn airvpn Still having this problem, it seems that the only option is to reinstall the linux. Quote Share this post Link to post
cm0s 118 Posted ... run your network from terminal you are on kali anyway remove network-manager, eddie, set eth0 to down upon boot, edit resolve.conf, set your iptables to airvpn and push your dns 10.5.0.1, use ssl/stunnel config you might need to fix stunnel with this: # rm /usr/bin/stunnel # ln -s /usr/bin/stunnel4 /usr/bin/stunnel # cd /etc/stunnel # touch stunnel.conf # nano stunnel.conf cert=/path/to/pem key=/path/to/key ctrl+o, ctrl+x ################################ have some tablez: iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -t nat -X iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # connectionz iptables -A INPUT -p tcp -m state --state NEW -m multiport --dports 80,443 -j ACCEPT # net, ssl iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT #allow loopback access iptables -A OUTPUT -d 255.255.255.255 -j ACCEPT #communicate with any DHCP server/router iptables -A INPUT -s 255.255.255.255 -j ACCEPT #communicate with any DHCP server/router iptables -A INPUT -s 192.168.0.0/16 -d 192.168.0.0/16 -j ACCEPT #communicate within lan iptables -A OUTPUT -s 192.168.0.0/16 -d 192.168.0.0/16 -j ACCEPT iptables -A FORWARD -i eth0 -o tun0 -j ACCEPT iptables -A FORWARD -i tun0 -o eth0 -j ACCEPT # make sure eth0/tun0 can communicate iptables -t nat -A PREROUTING -s 0/0 -p udp --dport 53 -j DNAT --to 10.5.0.1 #use vpn dns iptables -t nat -A PREROUTING -s 0/0 -p tcp --dport 53 -j DNAT --to 10.5.0.1 # use vpn dns iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE # map tun0 outgoing IP addy iptables -A OUTPUT -o eth0 ! -d 127.0.0.1 -p tcp --dport 1413 -j DROP # if traffic isn't vpn ####################### # ifup eth0 # stunnel "awesomeairvpnserver.ssl" --auth-nocache # openvpn --config "awesomeairvpnserver.ovpn" --auth-nocache # ping -c 1 duckduckgo.com i set my iface like this adjust for your needs: # The loopback network interface auto lo iface lo inet loopback # the static shit for eth0 auto eth0 iface eth0 inet static address 192.168.1.xxx gateway 192.168.1.1 dns-nameservers 10.5.0.1 in the router i shut off dhcp on my side leave it on for my isp on their side keeps me off the business account rates yet i still get the benefits of static on my local, had the same damn external ip on 'dhcp' from them for years anyway run my website on standalone box no problems, so anyone tells ya diff, i dunno works for me anyway, plus do your mac filter shit if needed, hide yer essid if wifi if this is a wifi config lemme know i'll post notes up on that that i got, how to connect with hidden essid or not hidden assign your hostname if needed in the router don't forget you can 'nohup' say you boot debian old school right and want to see how much you can do just from the prompt you can cd, ls, cd .., cp, cp -r, everything from there also and hit the net and have openvpn/stunnel goin from same window tho you need to use the command 'nohup' and put a '&' at the end i figured this out coz yeah, locked myself out of my vps many times so say yer wanting to get stuff goin you up your eth0/enp2s2 then when you get to the stunnel part: # nohup stunnel "airvpnserver.ssl" --auth-nocache & then do your openvpn command now you won't see stuff 'finish' but you'll know yer connected do a nslookup and traceroute curl etc hope this helps i don't always explain stuff best way 1 jetpack1 reacted to this Quote Share this post Link to post
Not connected, Your IP: 3.144.248.150
Online: 26846 users - 349025 Mbit/s total BW