Jump to content
Not connected, Your IP: 18.116.63.107
viewer-x

Updating OpenVPN in Eddie

Recommended Posts

Hi,

 

 

I'm using the latest Beta on Win10 and for while now I'm experiencing connection losses with Eddie. I'm not even downloadng anything or have any P2P software installed. just while surfing the web I get disconnected out of the blue. And it happens a lot.

Similar to here: https://airvpn.org/topic/20433-max-speeds-then-complete-drop-off-severed-connection/

 

Now I wanted to try the solution by using OpenVPN 2.4 RC1 or RC2. I know I can just use OpenVPN GUI with the configs from here but is there way to manually update the OpenVPN version used in Eddie?

I tried to simply overwrite the old exe with the new one but that didn't work so I guess threre's a special version needed for Eddie, especially since the version in Eddie is over 3MB while the one from the OpenVPN directory is less than 1MB.

 

Is it possible to update the OpenVPN version used in Eddie?

Thanks

Share this post


Link to post

You can replace the openvpn.exe binary file in it's directory in the portable version, however 99.9% it will not solve your issue.

Connection loss has nothing to do with the OpenVPN software itself, you should check your ISP and home network.


Occasional moderator, sometimes BOFH. Opinions are my own, except when my wife disagrees.

Share this post


Link to post

I doubt it has something to do with my ISP or network setup.

 

When I use the OpenVPN 2.4 RC GUI version with the ,conf from here I have no connection losses. Same, when I don't use any VPN app.

But when I use Eddie I get connection losses. So it rather looks like the problem is either with the OpenVPN version Eddie uses or with Eddie itself.

Share this post


Link to post

Here's the log of a disconnect:

 

I 2016.12.20 08:04:47 - Eddie client version: 2.11.9 / windows_x64, System: Windows, Name: Microsoft Windows NT 10.0.14393.0, Mono/.Net Framework: v4.0.30319
. 2016.12.20 08:04:47 - Reading options from C:\Users\sucke\AppData\Local\AirVPN\AirVPN.xml
. 2016.12.20 08:04:47 - Data path: C:\Users\sucke\AppData\Local\AirVPN
. 2016.12.20 08:04:47 - Application path: C:\Program Files\AirVPN
. 2016.12.20 08:04:47 - Executable path: C:\Program Files\AirVPN\AirVPN.exe
. 2016.12.20 08:04:47 - Command line arguments (1): path="home"
. 2016.12.20 08:04:47 - Operating System: Microsoft Windows NT 10.0.14393.0
I 2016.12.20 08:04:47 - OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
I 2016.12.20 08:04:47 - OpenVPN - Version: 2.3.13 - OpenSSL 1.0.2j 26 Sep 2016, LZO 2.09 (C:\Program Files\AirVPN\openvpn.exe)
I 2016.12.20 08:04:47 - SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
I 2016.12.20 08:04:47 - SSL - Version: stunnel 5.37 (C:\Program Files\AirVPN\stunnel.exe)
! 2016.12.20 08:04:47 - Ready
. 2016.12.20 08:04:47 - Updating systems & servers data ...
. 2016.12.20 08:04:48 - Systems & servers data update completed
! 2016.12.20 08:05:56 - Activation of Network Lock - Windows Filtering Platform
I 2016.12.20 08:06:29 - Session starting.
. 2016.12.20 08:06:31 - Shell of 'cmd.exe','/c net stop dnscache' done sync in 2594 ms
. 2016.12.20 08:06:33 - Shell of 'cmd.exe','/c net start dnscache' done sync in 2109 ms
. 2016.12.20 08:06:34 - Shell of 'cmd.exe','/c ipconfig /flushdns' done sync in 63 ms
. 2016.12.20 08:06:37 - Shell of 'cmd.exe','/c ipconfig /registerdns' done sync in 3094 ms
. 2016.12.20 08:06:37 - IPv6 disabled with packet filtering.
I 2016.12.20 08:06:37 - Checking authorization ...
! 2016.12.20 08:06:37 - Connecting to Adhara (Germany, Frankfurt)
. 2016.12.20 08:06:37 - OpenVPN > OpenVPN 2.3.13 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [iPv6] built on Nov 10 2016
. 2016.12.20 08:06:37 - OpenVPN > Windows version 6.2 (Windows 8 or greater) 64bit
. 2016.12.20 08:06:37 - OpenVPN > library versions: OpenSSL 1.0.2j 26 Sep 2016, LZO 2.09
. 2016.12.20 08:06:37 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:3100
. 2016.12.20 08:06:37 - OpenVPN > Control Channel Authentication: tls-auth using INLINE static key file
. 2016.12.20 08:06:37 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 08:06:37 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 08:06:37 - OpenVPN > Socket Buffers: R=[65536->262144] S=[65536->262144]
. 2016.12.20 08:06:37 - OpenVPN > UDPv4 link local: [undef]
. 2016.12.20 08:06:37 - OpenVPN > UDPv4 link remote: [AF_INET]185.104.184.42:443
. 2016.12.20 08:06:37 - OpenVPN > TLS: Initial packet from [AF_INET]185.104.184.42:443, sid=2eaa2c86 7d3a25a8
. 2016.12.20 08:06:37 - OpenVPN > VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.org
. 2016.12.20 08:06:37 - OpenVPN > Validating certificate key usage
. 2016.12.20 08:06:37 - OpenVPN > ++ Certificate has key usage 00a0, expects 00a0
. 2016.12.20 08:06:37 - OpenVPN > VERIFY KU OK
. 2016.12.20 08:06:37 - OpenVPN > Validating certificate extended key usage
. 2016.12.20 08:06:37 - OpenVPN > ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
. 2016.12.20 08:06:37 - OpenVPN > VERIFY EKU OK
. 2016.12.20 08:06:37 - OpenVPN > VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.org
. 2016.12.20 08:06:38 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.20 08:06:38 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 08:06:38 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.20 08:06:38 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 08:06:38 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
. 2016.12.20 08:06:38 - OpenVPN > [server] Peer Connection Initiated with [AF_INET]185.104.184.42:443
. 2016.12.20 08:06:40 - OpenVPN > SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
. 2016.12.20 08:06:40 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.0.21 255.255.0.0'
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: LZO parms modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route-related options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
. 2016.12.20 08:06:40 - OpenVPN > ROUTE_GATEWAY 192.168.1.1/255.255.255.0 I=8 HWADDR=24:05:0f:31:1d:45
. 2016.12.20 08:06:40 - OpenVPN > do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
. 2016.12.20 08:06:40 - OpenVPN > open_tun, tt->ipv6=0
. 2016.12.20 08:06:40 - OpenVPN > TAP-WIN32 device [Ethernet 2] opened: \\.\Global\{C45C458F-8565-4D62-B467-AA31470E2B51}.tap
. 2016.12.20 08:06:40 - OpenVPN > TAP-Windows Driver Version 9.21
. 2016.12.20 08:06:40 - OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.0.21/255.255.0.0 [sUCCEEDED]
. 2016.12.20 08:06:40 - OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.0.21/255.255.0.0 on interface {C45C458F-8565-4D62-B467-AA31470E2B51} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
. 2016.12.20 08:06:40 - OpenVPN > Successful ARP Flush on interface [15] {C45C458F-8565-4D62-B467-AA31470E2B51}
. 2016.12.20 08:06:45 - OpenVPN > TEST ROUTES: 1/1 succeeded len=0 ret=1 a=0 u/d=up
. 2016.12.20 08:06:45 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 185.104.184.42 MASK 255.255.255.255 192.168.1.1
. 2016.12.20 08:06:45 - OpenVPN > ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=40 and dwForwardType=4
. 2016.12.20 08:06:45 - OpenVPN > Route addition via IPAPI succeeded [adaptive]
. 2016.12.20 08:06:45 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.4.0.1
. 2016.12.20 08:06:45 - OpenVPN > ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=35 and dwForwardType=4
. 2016.12.20 08:06:45 - OpenVPN > Route addition via IPAPI succeeded [adaptive]
. 2016.12.20 08:06:45 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.4.0.1
. 2016.12.20 08:06:45 - OpenVPN > ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=35 and dwForwardType=4
. 2016.12.20 08:06:45 - OpenVPN > Route addition via IPAPI succeeded [adaptive]
. 2016.12.20 08:06:45 - Starting Management Interface
. 2016.12.20 08:06:45 - OpenVPN > Initialization Sequence Completed
. 2016.12.20 08:06:45 - DNS leak protection with packet filtering enabled.
. 2016.12.20 08:06:46 - DNS of a network adapter forced (Realtek RTL8192CU Wireless LAN 802.11n USB 2.0 Network Adapter, from manual (192.168.1.1,192.168.1.1) to 10.4.0.1)
. 2016.12.20 08:06:46 - DNS of a network adapter forced (TAP-Windows Adapter V9, from automatic (10.4.0.1) to 10.4.0.1)
I 2016.12.20 08:06:46 - Flushing DNS
. 2016.12.20 08:06:51 - Shell of 'cmd.exe','/c net stop dnscache' done sync in 5078 ms
. 2016.12.20 08:06:51 - Shell of 'cmd.exe','/c net start dnscache' done sync in 32 ms
. 2016.12.20 08:06:51 - Shell of 'cmd.exe','/c ipconfig /flushdns' done sync in 62 ms
. 2016.12.20 08:06:54 - Shell of 'cmd.exe','/c ipconfig /registerdns' done sync in 3078 ms
I 2016.12.20 08:06:54 - Checking route
I 2016.12.20 08:06:54 - Checking DNS
! 2016.12.20 08:07:07 - Connected.
. 2016.12.20 08:07:07 - OpenVPN > MANAGEMENT: Client connected from [AF_INET]127.0.0.1:3100
. 2016.12.20 08:07:07 - OpenVpn Management > >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info
. 2016.12.20 08:15:09 - Updating systems & servers data ...
. 2016.12.20 08:15:09 - Systems & servers data update completed
. 2016.12.20 08:25:30 - Updating systems & servers data ...
. 2016.12.20 08:25:30 - Systems & servers data update completed
. 2016.12.20 08:35:35 - Updating systems & servers data ...
. 2016.12.20 08:35:36 - Systems & servers data update completed
. 2016.12.20 08:45:44 - Updating systems & servers data ...
. 2016.12.20 08:45:44 - Systems & servers data update completed
. 2016.12.20 08:55:54 - Updating systems & servers data ...
. 2016.12.20 08:55:55 - Systems & servers data update completed
. 2016.12.20 09:06:11 - Updating systems & servers data ...
. 2016.12.20 09:06:19 - OpenVPN > [server] Inactivity timeout (--ping-restart), restarting
. 2016.12.20 09:06:19 - OpenVPN > SIGUSR1[soft,ping-restart] received, process restarting
. 2016.12.20 09:06:19 - OpenVPN > Restart pause, 2 second(s)
! 2016.12.20 09:06:19 - Disconnecting
. 2016.12.20 09:06:19 - Management - Send 'signal SIGTERM'
. 2016.12.20 09:06:19 - OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'
. 2016.12.20 09:06:19 - OpenVPN > MANAGEMENT: Client disconnected
. 2016.12.20 09:06:19 - OpenVPN > Assertion failed at misc.c:785 (es)
. 2016.12.20 09:06:19 - OpenVPN > Exiting due to fatal error
. 2016.12.20 09:06:19 - Connection terminated.
. 2016.12.20 09:06:19 - DNS of a network adapter restored to original settings (Realtek RTL8192CU Wireless LAN 802.11n USB 2.0 Network Adapter, to 192.168.1.1,192.168.1.1)
. 2016.12.20 09:06:19 - DNS of a network adapter restored to original settings (TAP-Windows Adapter V9, to automatic)
. 2016.12.20 09:06:19 - DNS leak protection with packet filtering disabled.
. 2016.12.20 09:06:21 - Updating systems & servers data ..., 1° try failed (Timeout für Vorgang überschritten)
. 2016.12.20 09:06:22 - Systems & servers data update completed
I 2016.12.20 09:06:25 - Checking authorization ...
! 2016.12.20 09:06:25 - Connecting to Adhara (Germany, Frankfurt)
. 2016.12.20 09:06:25 - OpenVPN > OpenVPN 2.3.13 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [iPv6] built on Nov 10 2016
. 2016.12.20 09:06:25 - OpenVPN > Windows version 6.2 (Windows 8 or greater) 64bit
. 2016.12.20 09:06:25 - OpenVPN > library versions: OpenSSL 1.0.2j 26 Sep 2016, LZO 2.09
. 2016.12.20 09:06:25 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:3100
. 2016.12.20 09:06:25 - OpenVPN > Control Channel Authentication: tls-auth using INLINE static key file
. 2016.12.20 09:06:25 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 09:06:25 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 09:06:25 - OpenVPN > Socket Buffers: R=[65536->262144] S=[65536->262144]
. 2016.12.20 09:06:25 - OpenVPN > UDPv4 link local: [undef]
. 2016.12.20 09:06:25 - OpenVPN > UDPv4 link remote: [AF_INET]185.104.184.42:443
. 2016.12.20 09:06:25 - OpenVPN > TLS: Initial packet from [AF_INET]185.104.184.42:443, sid=9a7b640d be672c4b
. 2016.12.20 09:06:25 - OpenVPN > VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.org
. 2016.12.20 09:06:25 - OpenVPN > Validating certificate key usage
. 2016.12.20 09:06:25 - OpenVPN > ++ Certificate has key usage 00a0, expects 00a0
. 2016.12.20 09:06:25 - OpenVPN > VERIFY KU OK
. 2016.12.20 09:06:25 - OpenVPN > Validating certificate extended key usage
. 2016.12.20 09:06:25 - OpenVPN > ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
. 2016.12.20 09:06:25 - OpenVPN > VERIFY EKU OK
. 2016.12.20 09:06:25 - OpenVPN > VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.org
. 2016.12.20 09:06:25 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.20 09:06:25 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 09:06:25 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.20 09:06:25 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.20 09:06:25 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
. 2016.12.20 09:06:25 - OpenVPN > [server] Peer Connection Initiated with [AF_INET]185.104.184.42:443
. 2016.12.20 09:06:27 - OpenVPN > SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)
. 2016.12.20 09:06:27 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.0.21 255.255.0.0'
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: LZO parms modified
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: route options modified
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: route-related options modified
. 2016.12.20 09:06:27 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
. 2016.12.20 09:06:27 - OpenVPN > ROUTE_GATEWAY 192.168.1.1/255.255.255.0 I=8 HWADDR=24:05:0f:31:1d:45
. 2016.12.20 09:06:27 - OpenVPN > do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
. 2016.12.20 09:06:27 - OpenVPN > open_tun, tt->ipv6=0
. 2016.12.20 09:06:27 - OpenVPN > TAP-WIN32 device [Ethernet 2] opened: \\.\Global\{C45C458F-8565-4D62-B467-AA31470E2B51}.tap
. 2016.12.20 09:06:27 - OpenVPN > TAP-Windows Driver Version 9.21
. 2016.12.20 09:06:27 - OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.0.21/255.255.0.0 [sUCCEEDED]
. 2016.12.20 09:06:27 - OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.0.21/255.255.0.0 on interface {C45C458F-8565-4D62-B467-AA31470E2B51} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
. 2016.12.20 09:06:27 - OpenVPN > Successful ARP Flush on interface [15] {C45C458F-8565-4D62-B467-AA31470E2B51}
. 2016.12.20 09:06:32 - OpenVPN > TEST ROUTES: 1/1 succeeded len=0 ret=1 a=0 u/d=up
. 2016.12.20 09:06:32 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 185.104.184.42 MASK 255.255.255.255 192.168.1.1
. 2016.12.20 09:06:32 - OpenVPN > ROUTE: route addition failed using CreateIpForwardEntry: Das Objekt ist bereits vorhanden. [status=5010 if_index=8]
. 2016.12.20 09:06:32 - OpenVPN > Route addition via IPAPI failed [adaptive]
. 2016.12.20 09:06:32 - OpenVPN > Route addition fallback to route.exe
. 2016.12.20 09:06:32 - OpenVPN > env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
. 2016.12.20 09:06:32 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.4.0.1
. 2016.12.20 09:06:32 - OpenVPN > ROUTE: route addition failed using CreateIpForwardEntry: Das Objekt ist bereits vorhanden. [status=5010 if_index=15]
. 2016.12.20 09:06:32 - OpenVPN > Route addition via IPAPI failed [adaptive]
. 2016.12.20 09:06:32 - OpenVPN > Route addition fallback to route.exe
. 2016.12.20 09:06:32 - OpenVPN > env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
. 2016.12.20 09:06:32 - OpenVPN > C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.4.0.1
. 2016.12.20 09:06:32 - OpenVPN > ROUTE: route addition failed using CreateIpForwardEntry: Das Objekt ist bereits vorhanden. [status=5010 if_index=15]
. 2016.12.20 09:06:32 - OpenVPN > Route addition via IPAPI failed [adaptive]
. 2016.12.20 09:06:32 - OpenVPN > Route addition fallback to route.exe
. 2016.12.20 09:06:32 - OpenVPN > env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
. 2016.12.20 09:06:32 - Starting Management Interface
. 2016.12.20 09:06:32 - OpenVPN > Initialization Sequence Completed
. 2016.12.20 09:06:32 - DNS leak protection with packet filtering enabled.
. 2016.12.20 09:06:32 - DNS of a network adapter forced (Realtek RTL8192CU Wireless LAN 802.11n USB 2.0 Network Adapter, from manual (192.168.1.1,192.168.1.1) to 10.4.0.1)
. 2016.12.20 09:06:32 - DNS of a network adapter forced (TAP-Windows Adapter V9, from automatic (10.4.0.1) to 10.4.0.1)
I 2016.12.20 09:06:32 - Flushing DNS
. 2016.12.20 09:06:35 - Shell of 'cmd.exe','/c net stop dnscache' done sync in 2593 ms
. 2016.12.20 09:06:35 - Shell of 'cmd.exe','/c net start dnscache' done sync in 79 ms
. 2016.12.20 09:06:35 - Shell of 'cmd.exe','/c ipconfig /flushdns' done sync in 46 ms
. 2016.12.20 09:06:38 - Shell of 'cmd.exe','/c ipconfig /registerdns' done sync in 3079 ms
I 2016.12.20 09:06:38 - Checking route
I 2016.12.20 09:06:38 - Checking DNS
! 2016.12.20 09:06:51 - Connected.
. 2016.12.20 09:06:51 - OpenVPN > MANAGEMENT: Client connected from [AF_INET]127.0.0.1:3100
. 2016.12.20 09:06:51 - OpenVpn Management > >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info

Share this post


Link to post

what is all this:

 

. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: LZO parms modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route-related options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
 
I don't have that in my logs.  Do you have some kind of custom options put in? 
 
Edit:  I'm stupid, it's of course in my logs because it is pushed by the server.  

Share this post


Link to post

@Khariz

I have no idea what that is.

 

Here are my settings:

settings158jnl.png

 

settings2lujd0.png

 

settings3yajwx.png

 

 

Routes are empty, Proxy/Tor is set to none and Protocols and DNS are set to Automatic.

And the TAP driver setting Media Status is set to Application Controlled since Always Connected won't let me change servers without restarting my PC.

Share this post


Link to post

 

what is all this:

 

. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: LZO parms modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: route-related options modified
. 2016.12.20 08:06:40 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
 
I don't have that in my logs.  Do you have some kind of custom options put in? 

 

I got these lines since day one of my VPN usage on all platforms. I'm not entirely sure what they refer to, either to PUSH_REPLY messages modifying things or to OpenVPN's normal modifications.


NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT.

LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too!

Want to contact me directly? All relevant methods are on my About me page.

Share this post


Link to post

I may be a different verbosity setting somehow, or my brain has always just ignored that.  I'll check again.  Oh yeah, those are clearly the pushed settings.  I was just being dumb when I read this.

 

I actually want to try something.  I wonder what happens if you replace the openvpn.exe in the Eddie subfolder with the 2.4rc1 executable and try to run Eddie (sort of tricking it into using 2.4).  I wonder if that would break it completely, or make it work better, or if will just error out.  I'm going to try that and find out.  I'm special like that.

Share this post


Link to post

I actually want to try something.  I wonder what happens if you replace the openvpn.exe in the Eddie subfolder with the 2.4rc1 executable and try to run Eddie (sort of tricking it into using 2.4).  I wonder if that would break it completely, or make it work better, or if will just error out.  I'm going to try that and find out.  I'm special like that.

 

Updated to 2.4-rc2 on Linux. The results are not promising.

. 2016.12.22 08:10:56 - OpenVPN > OpenVPN 2.4_rc2 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Dec 16 2016
. 2016.12.22 08:10:56 - OpenVPN > library versions: OpenSSL 1.0.1t  3 May 2016, LZO 2.08
. 2016.12.22 08:10:56 - OpenVPN > setsockopt(IPV6_V6ONLY=0)
. 2016.12.22 08:10:56 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET6]::1:3100
. 2016.12.22 08:10:56 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.22 08:10:56 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.22 08:10:56 - OpenVPN > TCP/UDP: Preserving recently used remote address: [AF_INET]10.190.1.119:3124
. 2016.12.22 08:10:56 - OpenVPN > Socket Buffers: R=[87380->87380] S=[16384->16384]
. 2016.12.22 08:10:56 - OpenVPN > Attempting to establish TCP connection with [AF_INET]10.190.1.119:3124 [nonblock]
. 2016.12.22 08:10:57 - OpenVPN > TCP connection established with [AF_INET]10.190.1.119:3124
. 2016.12.22 08:10:57 - OpenVPN > Send to HTTP proxy: 'CONNECT 185.9.19.106:443 HTTP/1.0'
. 2016.12.22 08:10:57 - OpenVPN > Send to HTTP proxy: 'Host: 185.9.19.106'
. 2016.12.22 08:10:57 - OpenVPN > HTTP proxy returned: 'HTTP/1.0 200 Connection established'
. 2016.12.22 08:10:59 - OpenVPN > TCP_CLIENT link local: (not bound)
. 2016.12.22 08:10:59 - OpenVPN > TCP_CLIENT link remote: [AF_INET]10.190.1.119:3124
. 2016.12.22 08:10:59 - OpenVPN > TLS: Initial packet from [AF_INET]10.190.1.119:3124, sid=2da85783 022cda5a
. 2016.12.22 08:10:59 - OpenVPN > VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.org
. 2016.12.22 08:10:59 - OpenVPN > Validating certificate key usage
. 2016.12.22 08:10:59 - OpenVPN > ++ Certificate has key usage  00a0, expects 00a0
. 2016.12.22 08:10:59 - OpenVPN > VERIFY KU OK
. 2016.12.22 08:10:59 - OpenVPN > Validating certificate extended key usage
. 2016.12.22 08:10:59 - OpenVPN > ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
. 2016.12.22 08:10:59 - OpenVPN > VERIFY EKU OK
. 2016.12.22 08:10:59 - OpenVPN > VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=Alderamin, emailAddress=info@airvpn.org
. 2016.12.22 08:10:59 - OpenVPN > Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSA
. 2016.12.22 08:10:59 - OpenVPN > [Alderamin] Peer Connection Initiated with [AF_INET]10.190.1.119:3124
. 2016.12.22 08:11:00 - OpenVPN > SENT CONTROL [Alderamin]: 'PUSH_REQUEST' (status=1)
. 2016.12.22 08:11:00 - OpenVPN > PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.5.0.1,comp-lzo no,route-gateway 10.5.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.5.0.57 255.255.0.0'
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: timers and/or timeouts modified
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: compression parms modified
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: --ifconfig/up options modified
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: route options modified
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: route-related options modified
. 2016.12.22 08:11:00 - OpenVPN > OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
. 2016.12.22 08:11:00 - OpenVPN > Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.22 08:11:00 - OpenVPN > Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.22 08:11:00 - OpenVPN > Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key
. 2016.12.22 08:11:00 - OpenVPN > Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
. 2016.12.22 08:11:00 - OpenVPN > ROUTE_GATEWAY 192.168.137.1/255.255.255.0 IFACE=wlan0 HWADDR=60:67:20:3d:21:2c
. 2016.12.22 08:11:00 - OpenVPN > TUN/TAP device tun0 opened
. 2016.12.22 08:11:00 - OpenVPN > TUN/TAP TX queue length set to 100
. 2016.12.22 08:11:00 - OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
. 2016.12.22 08:11:00 - OpenVPN > /sbin/ip link set dev tun0 up mtu 1500
. 2016.12.22 08:11:00 - OpenVPN > /sbin/ip addr add dev tun0 10.5.0.57/16 broadcast 10.5.255.255
. 2016.12.22 08:11:06 - OpenVPN > /sbin/ip route add 10.190.1.119/32 via 192.168.137.1
. 2016.12.22 08:11:06 - OpenVPN > /sbin/ip route add 0.0.0.0/1 via 10.5.0.1
. 2016.12.22 08:11:06 - OpenVPN > /sbin/ip route add 128.0.0.0/1 via 10.5.0.1
. 2016.12.22 08:11:06 - OpenVPN > /sbin/ip route add 192.168.137.0/24 via 192.168.137.1
. 2016.12.22 08:11:06 - OpenVPN > /sbin/ip route add 10.190.1.119/32 via 192.168.137.1
. 2016.12.22 08:11:06 - OpenVPN > ERROR: Linux route add command failed: external program exited with error status: 2
. 2016.12.22 08:11:06 - Starting Management Interface
. 2016.12.22 08:11:06 - OpenVPN > RTNETLINK answers: File exists
W 2016.12.22 08:11:06 - Connection refused
! 2016.12.22 08:11:06 - Disconnecting
. 2016.12.22 08:11:06 - Connection terminated.

 

Works as always via Terminal.


NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT.

LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too!

Want to contact me directly? All relevant methods are on my About me page.

Share this post


Link to post

As I said I tried to replace the OpenVPN.exe on Windows with a simliar result. It just won't work.

Any idea why Eddie disconnects so often?

Share this post


Link to post

Eddie literally never disconnects for me on Windows 10.  I can't replicate the issue.  So I really can't explain what's going on for you.  I don't disconnect using either OpenVPN or Eddie.

Share this post


Link to post

1. I can confirm giganerd's observation that openvpn 2.4rc1~2 (in debian stretch/testing) fails in the same manner as he/she reported.

 

2. I'd also like to report that if SSL is selected in Eddie (using latest experimental v2.11.9), it doesn't work with the latest stunnel4 (5.38-1) in debian stretch/testing. From my Eddie Log: "options = NO_SSLv2" Illegal SSL option

Share this post


Link to post

Hey guys,

 

I'm not at all technically skilled when it comes to VPN's, but I can confirm the same problem as giganerd and elwango74. I was actually connected through the AirVPN client when I popped in the update(like a hour ago, max), and noticed that openVPN was one of the packages being updated. Ever since connections keep getting refused.

I could dump the terminal log if it's of any use? They're alot like giganerds though, same 'Connection refused'-stuff.

 

Running kali-rolling 2016.2, and coincidentally finished a clean re-install this morning. So there isn't much else that could be wrong. ;p

 

openvpn/kali-rolling,now 2.4~rc1-2 amd64 [installed,automatic]

 

^ current package in the kali-rolling repository.. not sure if that makes it the one for all debian-derivatives, though.

 

Hope it helps!

Share this post


Link to post

^ current package in the kali-rolling repository.. not sure if that makes it the one for all debian-derivatives, though.

 

Debian-testing and openvpn-stable are both on 2.3.x. It's 2.4.x on Debian-sid and openvpn-testing.

 

I'd say, right now supporting 2.4.x is not mandatory for the client, just use 2.3.x until OpenVPN decides to move 2.4.x to stable.


NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT.

LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too!

Want to contact me directly? All relevant methods are on my About me page.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...