DD-WRT users, has anyone used IPTABLES to open ports on router firewall?

[3vSIMdRVv6Q1TmbFsIiP8QV8 1]

My hardward/firmware:

Router ModelLinksys WRT 1200AC

Firmware Version

DD-WRT v3.0-r28788 std (01/13/16)

Kernel Version

Linux 3.18.25 #59 SMP Mon Jan 11 11:48:34 CET 2016 armv7l

 

My goal:

To open ports 8000 and 8001 on my router to allow shoutcast server to livestream from static ip 192.168.10.172 on the network.

 

 

Hi,

After reading https://airvpn.org/external_link/?url=https%3A%2F%2Fwww.dd-wrt.com%2Fwiki%2Findex.php%2FIptables_command%23Port_Forwarding_to_a_specific_LAN_IP and also being told that the GUI interface only forwards from WAN to LAN and not from TUN to LAN... it seems this is my last obstacle to streaming with Shoutcast.

I still haven't been able to get IPTABLES to work for me yet. I tried different variations of the commands, but nothing worked for me... then I didn't know if I was putting the right information into the variables.

 

Has anyone with this or similar dd-wrt set up successfully added open ports to your router firewall using IPTABLES? If so, can I see how your commands look?

Currently, all I have for my firewall commands are,

 

Firewall

iptables -I FORWARD -i br0 -o tun0 -j ACCEPT
iptables -I FORWARD -i tun0 -o br0 -j ACCEPT
iptables -I INPUT -i tun0 -j REJECT
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE

What else should be there to open port 8000 and 8001 to the static IP listed above?

Thanks for any help and directions.

 

 

 

[zhang888 1066]

Who is going to connect to your 192.168.10.172, and from which interface and subnet(s)?

You can only make iptables rules when you have an answer to that.

[NaDre 157]

I am familiar with Linux, but not DD-WRT.

 

Have you tried something like this?

/sbin/iptables -t nat -A PREROUTING -i tun0 -p tcp --dport 8000 -j DNAT --to-destination 192.168.10.172:8000
/sbin/iptables -t nat -A PREROUTING -i tun0 -p udp --dport 8000 -j DNAT --to-destination 192.168.10.172:8000
/sbin/iptables -t nat -A PREROUTING -i tun0 -p tcp --dport 8001 -j DNAT --to-destination 192.168.10.172:8001
/sbin/iptables -t nat -A PREROUTING -i tun0 -p udp --dport 8001 -j DNAT --to-destination 192.168.10.172:8001

 

This assumes you have configured two ports on AirVPN servers for forwarding to you using the AirVPN web GUI, and forward them to your router ports 8000 and 8001. But 8000 and 8001 may not be available. So you would have to use two other ports to receive connections on the AirVPN server.

 

If the stuff above does not work, maybe set up forwarding from WAN to LAN using the DD-WRT GUI and see what it does. You may only have to replace "eth0" with "tun0".