PFSense Port Forwarding & Plex

[chuckhammerberry 2]

I read the other postings and followed the instructions but cannot get Plex to be reachable online

 

Here is what i have

 

Airvpn

Port 14041 Protocol TCP/UDP to Local port 32400

 

in Pfsense

 

under firewall Rules

 

AIRVPN_WAN

 

ID Proto Source Port Destination Port Gateway Queue Schedule Description   IPv4 TCP/UDP AIRVPN_WAN address 32400 192.168.0.20 32400 * none   plex 

​

 

Under NAT Port Forward

 

If Proto Src. addr Src. ports Dest. addr Dest. ports NAT IP NAT Ports Description WAN TCP/UDP * * * 14041 192.168.0.20 32400 plex_32400 

​

 

 

Plex is set to 32400 but still unreachable

[chuckhammerberry 2]

just noticed also that utorrent speeds are slow. I forwarded a adifferent port , didnt use local port, enetered the port into uTorrent which shows its reachable but speeds are nothing more than 1Mbps

[chuckhammerberry 2]

i didnt change any settings and now its working,,,.. but that probably means it will also stop working too

[Wolf666 17]

Here my working Plex configuration

 

 

Sent from my iPad using Tapatalk

[knicker 11]

Hi wolf666,

 

I have that exact same setup... Not working though... No outside connection in Plex. I've set the port in Plex manual and used the port from airvpn....

 

Some help please?

 

Best regards,

 

KniCKER

[Hobedei 0]

Was having the same issues with port forwarding within pfSense for Plex. I have the exact same configuration you guys referenced and found that the one thing that made it all work .. make sure to put 32400 inside the airvpn local port that you have set up as well. Maybe you are doing that and it still doesn't work, just thought I'd add that here. Hope it continues to work, lol. I don't want to toil for hours trying to figure it out again.