Jump to content


Photo

Network Lock failure, Eddie 2.13.6

Network Lock WFP

  • Please log in to reply
9 replies to this topic

#1 oroboros

oroboros

    Newbie

  • New Members
  • Pip
  • 3 posts

Posted 29 March 2018 - 01:53 AM

I have been using Eddie 2.11.5 (Windows 10, portable, 64bit) for a while now, and Network Lock works fine.
 
I just installed Eddie 2.13.6 (Windows 10, portable, 64bit), and Network Lock no longer works. Instead I get the error message (see attached screenshot):

 

Windows WFP, Add rule failed: App not found: <rule name="NetLock - Allow Eddie" layer="ale_auth_recv_accept_v4" ... etc.

 

Settings on both versions are the same: Mode Automatic, Allow lan/private, Allow ping, no Addresses allowed. I even tried swaping AirVPN.xml files to see if that would work, but it still doesn't.

 

 

Attached Thumbnails

  • AirVpn_SSCapture_2.png


#2 LZ1

LZ1

    It's nice to be nice to nice people

  • Moderators
  • 1829 posts

Posted 29 March 2018 - 08:04 AM

Hello!

 

Then please try the experimental client, as that error looks similar to one which got fixed in 2.14.2. :)

 

Instructions on where to find it can be found in my signature.


Hi there, are you new to AirVPN? Many of your questions are already answered in this guide. Its Guides Section has guides on Linux/Torrenting/Blocked sites & many other topics too.
Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please read the First Questions section in the link above for more details, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.

Tired of Windows? Why Linux Is Better.

#3 oroboros

oroboros

    Newbie

  • New Members
  • Pip
  • 3 posts

Posted 29 March 2018 - 10:56 PM

I installed Eddie 2.14.2 (Windows10, portable, 64bit), but now get the following error:

 

Cannot login. (curl is required.)

 

... even though, as you can see in the screen shot below, curl.exe is in the folder where it usually is.

 

Logfile

. 2018.03.29 18:59:17 - Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
. 2018.03.29 18:59:17 - Reading options from \\N5550\xxxxx\Internet Downloads\_Security_\AirVPN\airvpn_current\AirVPN.xml
. 2018.03.29 18:59:18 - Command line arguments (0):
. 2018.03.29 18:59:19 - OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
E 2018.03.29 18:59:19 - OpenVPN - Not available
W 2018.03.29 18:59:19 - SSH - Not available
W 2018.03.29 18:59:19 - SSL - Not available
W 2018.03.29 18:59:19 - curl - Not available
W 2018.03.29 18:59:19 - Certification Authorities - Not available
. 2018.03.29 18:59:19 - Updating systems & servers data ...
I 2018.03.29 18:59:19 - Ready
. 2018.03.29 18:59:19 - Cannot retrieve systems & servers data. (curl is required.)
I 2018.03.29 18:59:36 - Checking login ...
F 2018.03.29 18:59:36 - Cannot login. (curl is required.)

Attached Thumbnails

  • AirVpn_SSCapture_3.PNG


#4 LZ1

LZ1

    It's nice to be nice to nice people

  • Moderators
  • 1829 posts

Posted 29 March 2018 - 11:19 PM

Strange. Did you try un-installing, restart and then going with the installer instead?


Hi there, are you new to AirVPN? Many of your questions are already answered in this guide. Its Guides Section has guides on Linux/Torrenting/Blocked sites & many other topics too.
Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please read the First Questions section in the link above for more details, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.

Tired of Windows? Why Linux Is Better.

#5 oroboros

oroboros

    Newbie

  • New Members
  • Pip
  • 3 posts

Posted 31 March 2018 - 01:31 AM

I'm using the portable version, from a network drive. 

 

 

Attached Thumbnails

  • AirVpn_SSCapture_4.PNG


#6 hugomueller

hugomueller

    Advanced Member

  • Members
  • PipPipPip
  • 128 posts

Posted 02 April 2018 - 11:36 PM

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'



#7 Staff

Staff

    Advanced Member

  • Staff
  • PipPipPip
  • 7457 posts

Posted 02 April 2018 - 11:41 PM

@hugomueller

 

Hi,

 

can you please publish a full system report as well? "Logs" > click the life belt icon > copy all > paste in the message

 

Kind regards



#8 LZ1

LZ1

    It's nice to be nice to nice people

  • Moderators
  • 1829 posts

Posted 02 April 2018 - 11:49 PM

Network Lock failed for me in 2.14.2 

 

Eddie version: 2.14.2 / windows_x64, System: Windows, Name: Windows 10 Pro, Version: Microsoft Windows NT 10.0.16299.0, Mono/.Net Framework: v4.0.30319
Reading options from C:\Users\Admin\AppData\Local\AirVPN\AirVPN.xml
Profile options not found, using defaults.
Command line arguments (1): path="home"
OpenVPN Driver - TAP-Windows Adapter V9, version 9.21.2
OpenVPN - Version: 2.4.4 - OpenSSL 1.0.2l  25 May 2017, LZO 2.10 (C:\Program Files\AirVPN\openvpn.exe)
SSH - Version: plink 0.67 (C:\Program Files\AirVPN\plink.exe)
SSL - Version: stunnel 5.40 (C:\Program Files\AirVPN\stunnel.exe)
curl - Version: 7.54.1 (C:\Program Files\AirVPN\curl.exe)
Certification Authorities: C:\Program Files\AirVPN\res\cacert.pem

 

OpenVPN > OPTIONS IMPORT: adjusting link_mtu to 1625
OpenVPN > OPTIONS IMPORT: data channel crypto options modified
OpenVPN > Data Channel: using negotiated cipher 'AES-256-GCM'
OpenVPN > Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
OpenVPN > interactive service msg_channel=0
OpenVPN > ROUTE_GATEWAY 172.18.0.1/255.255.0.0 I=11 HWADDR=xxx
OpenVPN > open_tun
Windows WFP, Add rule failed: Interface ID 'xxx' unknown or disabled for the layer.:<rule name="NetLock - Interface - Allow xxx - IPv6" layer="ale_auth_recv_accept_v6" action="permit" weight="1000"><if field="ip_local_interface" match="equal" interface="xxx" /></rule>
OpenVPN > TAP-Windows Driver Version 9.21
OpenVPN > Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.3.85/255.255.0.0 [SUCCEEDED]
OpenVPN > Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.3.85/255.255.0.0 on interface {AF1A7881-8351-44C9-A8A1-4B6DF562670F} [DHCP-serv: 10.4.255.254, lease-time: 31536000]
OpenVPN > Successful ARP Flush on interface [2] xxx
OpenVPN > do_ifconfig, tt->did_ifconfig_ipv6_setup=0
Disconnecting
Sending management termination signal
Management - Send 'signal SIGTERM'
OpenVPN > MANAGEMENT: CMD 'signal SIGTERM'

 

I got that as well. After supplying Staff with the requested solution, you can try what worked for me.

 

The same goes for the OP :).


Hi there, are you new to AirVPN? Many of your questions are already answered in this guide. Its Guides Section has guides on Linux/Torrenting/Blocked sites & many other topics too.
Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please read the First Questions section in the link above for more details, thank you.
Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily.

Tired of Windows? Why Linux Is Better.

#9 Clodo

Clodo

    AirVPN Team

  • Staff
  • PipPipPip
  • 288 posts
  • LocationItaly

Posted 05 April 2018 - 12:12 PM

I'm using the portable version, from a network drive.

Confirmed bug. Eddie have some issue on network \\ path.
Copy to local disk, or map the network path on a disk letter, or wait a new release that fix this issue.
Thanks for the report.

#10 MersennePrime

MersennePrime

    Member

  • Members
  • PipPip
  • 13 posts

Posted 12 May 2018 - 11:03 AM

Since I had similar problems that I could finally solve: Do you use the Bitdefender engine (any Bitdefender security product, Bullguard, and probably some more)?

 

Once I uninstalled Bitdefender, any error messages I received concerning Eddie went away!

 

Everything works fine with Windows Defender/Firewall or ESET Internet Security or Avast free antivirus + Voodooshield.







Similar Topics Collapse


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

Servers online. Online Sessions: 13952 - BW: 50569 Mbit/sYour IP: 54.198.96.198Guest Access.