Jump to content
Not connected, Your IP: 3.238.195.81
Tommie

Connect to a recommended server...

Recommended Posts

"Connect to a recommended server" always, without fail, 100% of the time, will connect me to servers in Toronto, Canada. I'm in the US, not anywhere remotely near Toronto. If the speeds I were getting from being connected to the Canadian AirVPN servers were impressive then I might not mind it, but they're anything but impressive (for me). So what gives with this?

 

Doing some experimentation with this I've found it weird that I can't even prevent Eddie from doing this. Under Countries I've whitelisted United States. I even went to so far as to blacklist Canada. And still "Connect to a recommended server" always connects me to Canada. What exactly is the point of whitelisting and blacklisting? Eddie does not work as I would logically expect it to, at least as far as it concerns connecting to a server which is best for me, in my country, and with low latency and good speeds. In selecting servers Eddie does not appear to be making a determination based on quickest ping times.

 

I'll speculate that AirVPN is doing this for load balancing reasons. But in forcing me outside my own country, and forcing poor performance on me, it's really just forcing me to have to manually select a server in my own country, and one which may impinge on AirVPN's objectives of load balancing. There has to be a better way.

Share this post


Link to post

"Connect to a recommended server" always, without fail, 100% of the time, will connect me to servers in Toronto, Canada. I'm in the US, not anywhere remotely near Toronto. If the speeds I were getting from being connected to the Canadian AirVPN servers were impressive then I might not mind it, but they're anything but impressive (for me). So what gives with this?

 

That's caused by higher rating of Canada servers than USA servers. However:

 

Doing some experimentation with this I've found it weird that I can't even prevent Eddie from doing this. Under Countries I've whitelisted United States. I even went to so far as to blacklist Canada. And still "Connect to a recommended server" always connects me to Canada.

 

That's unexpected. We can't reproduce the issue. Maybe you have ticked "Show all" in the "Servers" window, or you have a white list for servers too (in this case, servers white list takes precedence over country white list). Can you check?

 

Kind regards

Share this post


Link to post

When in the USA if Eddie is set to Speed scoring then you will connect to Canada servers. If scoring is set to latency, then you will connect to USA servers.

 

That's default behavior. If you've customized the white and black list, your experience may be different.

Share this post


Link to post

Maybe you have ticked "Show all" in the "Servers" window, or you have a white list for servers too (in this case, servers white list takes precedence over country white list). Can you check?

Show All is not ticked and never was..

 

The only servers I have white listed are US servers.

 

Furthermore, I have all other country servers blacklisted.

 

Still, without fail, 100% of the time, Connect to a recommended server connects me to Canadian servers. This is incredibly annoying. It shouldn't be this difficult.

Share this post


Link to post

When in the USA if Eddie is set to Speed scoring then you will connect to Canada servers. If scoring is set to latency, then you will connect to USA servers.

 

That indeed proved to be the problem. Setting "Scoring Rule" to "Latency" finally allows Eddie to select servers in my native land and actually makes Eddie obey the blacklist.

 

As much as I like AirVPN I'll have to say this is one idiotic issue. It needs to be fixed. What exactly is the point of a black list and a white list if it can be totally ignored by the app and overridden by a function that, from the user perspective, is less than obvious/intuitive as to everything it does? Obviously it does far more than merely prioritize server selection based on just server speed and latency. It also completely bypasses the blacklist, which is no minor issue. Blacklisting and whitelisting should take precedent over EVERYTHING else.

Share this post


Link to post

As much as I like AirVPN I'll have to say this is one idiotic issue. It needs to be fixed. What exactly is the point of a black list and a white list if it can be totally ignored by the app and

 

It sounds like a bug, can you help us reproduce it? Describe a step by step procedure to reproduce the bug with Eddie 2.14.2beta please at your convenience.

 

Remember, though, from your description it looks like you have white listed a country, and then black listed a series of servers. When you define two lists, one for the countries and one for the servers, the servers list takes precedence over the countries list. That's intended (we prefer this logic now: older Eddie versions performed an intersection of the lists and this caused a lot of confusion on users).

 

Kind regards

Share this post


Link to post

 

As much as I like AirVPN I'll have to say this is one idiotic issue. It needs to be fixed. What exactly is the point of a black list and a white list if it can be totally ignored by the app and

 

It sounds like a bug, can you help us reproduce it? Describe a step by step procedure to reproduce the bug with Eddie 2.14.2beta please at your convenience.

 

Remember, though, from your description it looks like you have white listed a country, and then black listed a series of servers. When you define two lists, one for the countries and one for the servers, the servers list takes precedence over the countries list. That's intended (we prefer this logic now: older Eddie versions performed an intersection of the lists and this caused a lot of confusion on users).

 

Kind regards

I'm running Eddie 2.13.6 on OSX Sierra 10.12.6

 

I think I've already explained, in quite some detail, the problem and how I've got Eddie configured, to wit:

 

 

Show All is not ticked and never was..

Maybe you have ticked "Show all" in the "Servers" window, or you have a white list for servers too (in this case, servers white list takes precedence over country white list). Can you check?

 

The only servers I have white listed are US servers.

 

Furthermore, I have all other countries blacklisted.

 

Not sure what else I can add, but if you need more specifics just ask away.

 

What was causing the problem was having "Speed" selected rather than "Latency." In every case "Connect to a recommended server" connected me to Canada every single time without fail, even though Canada is blacklisted.

Share this post


Link to post

Hello!

 

Note that the fact that Canada is black listed is irrelevant in your case, because according to your description you have defined lists for the servers.

 

Try this:

- delete any list both on servers and countries

- white list United States

- test again

 

If the problem persists with the above list (i.e. Eddie connects to a Canada server) please send us a system report.

 

Kind regards

Share this post


Link to post

Weird, Im pretty sure I had "speed" set in mine (I never touched the option so its whatever the default is) and mine ONLY picks the servers I have in my list (I do have the Show All box unchecked as well). I have the six California ones listed, 3 Texas ones, and the two experimental IPv6 servers. And thats all it chooses from when it disconnects and tries to reconnect. More often than not, it just goes through the California ones first, and THEN will try to go to either Texas or like Belgium next. I hate it when it connects me automatically to Castor and the other IPv6 one though. Being in California, my internet goes down to DSL speeds coming all the way back from Belgium or The Netherlands hehe. Going to Google is a shock when you get there and its in Dutch or whatever language its in or when looking at a stores website for stock/locations and it thinks you're in Europe and cant find the nearest Target hahaha.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...