Jump to content


Photo

Router config not working

router config openvpn

  • Please log in to reply
3 replies to this topic

#1 rilasofa

rilasofa

    Newbie

  • New Members
  • Pip
  • 2 posts

Posted 22 March 2017 - 01:25 PM

Hello,

 

I've created a router config and set it up on my router, but the traffic is not going through the VPN.

 

Here is a part of the generated router config without the certificates:

clientdev tun
proto udp
remote us.vpn.airdns.org 443
resolv-retry infinite
nobind
persist-key
persist-tun
remote-cert-tls server
cipher AES-256-CBC
comp-lzo no
route-delay 5
verb 3
explicit-exit-notify 5

 

Here is my router log:

Mar 22 09:11:09 RT-N56U: WAN up (eth3)
Mar 22 09:11:09 dnsmasq[397]: read /etc/hosts - 3 addresses
Mar 22 09:11:09 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses
Mar 22 09:11:09 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Mar 22 09:11:09 dnsmasq[397]: using nameserver 167.206.10.178#53
Mar 22 09:11:09 dnsmasq[397]: using nameserver 167.206.10.179#53
Mar 22 09:11:09 miniupnpd[449]: version 1.9 starting UPnP-IGD ext if eth3 BOOTID=1490188269
Mar 22 09:11:09 miniupnpd[449]: HTTP listening on port 17455
Mar 22 09:11:09 httpd[445]: Server listening port 80 (HTTP).
Mar 22 09:11:10 RT-N56U: starting OpenVPN client...
Mar 22 09:11:10 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:11:10 kernel: br0: port 3(rai0) entered forwarding state
Mar 22 09:11:10 kernel: br0: port 2(ra0) entered forwarding state
Mar 22 09:11:10 kernel: br0: port 1(eth2) entered forwarding state
Mar 22 09:11:19 NTP Client: Synchronizing time to pool.ntp.org.
Mar 22 09:11:22 NTP Client: System time changed, offset: 2.135226s
Mar 22 09:12:13 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:13:15 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:14:17 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:15:19 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:16:21 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:17:23 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:18:25 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mar 22 09:19:27 openvpn-cli[476]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts

 

 

Attaching a screenshot from my router admin config:
Screen Shot.png
 
Can you please help me troubleshoot?
 
Thanks!
Jim


#2 go558a83nk

go558a83nk

    Advanced Member

  • Members
  • PipPipPip
  • 1497 posts

Posted 22 March 2017 - 03:06 PM

Is there more to that log?  according to the log you posted there openvpn never actually ran.



#3 rilasofa

rilasofa

    Newbie

  • New Members
  • Pip
  • 2 posts

Posted 02 April 2017 - 09:58 PM

Here's the full log (replaced my IP with -.-.-.-):

 

Apr  2 17:53:31 syslogd started: BusyBox v1.24.1Apr  2 17:53:31 RT-N56U: firmware version: 3.4.3.9-099
Apr  2 17:53:31 kernel: klogd started: BusyBox v1.24.1 (2016-01-31 21:51:57 KRAT)
Apr  2 17:53:31 kernel: Linux version 3.4.110 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Sun Jan 31 23:21:35 KRAT 2016
Apr  2 17:53:31 kernel: Ralink SoC: RT3883, RevID: 0105, RAM: DDR2, XTAL: 40MHz
Apr  2 17:53:31 kernel: CPU/OCP/SYS frequency: 500/166/166 MHz
Apr  2 17:53:31 kernel: CPU revision is: 0001974c (MIPS 74Kc)
Apr  2 17:53:31 kernel: Determined physical RAM map:
Apr  2 17:53:31 kernel:  memory: 08000000 @ 00000000 (usable)
Apr  2 17:53:31 kernel: Zone PFN ranges:
Apr  2 17:53:31 kernel:   Normal   0x00000000 -> 0x00008000
Apr  2 17:53:31 kernel: Movable zone start PFN for each node
Apr  2 17:53:31 kernel: Early memory PFN ranges
Apr  2 17:53:31 kernel:     0: 0x00000000 -> 0x00008000
Apr  2 17:53:31 kernel: On node 0 totalpages: 32768
Apr  2 17:53:31 kernel: free_area_init_node: node 0, pgdat 8032d9e0, node_mem_map 81000000
Apr  2 17:53:31 kernel:   Normal zone: 256 pages used for memmap
Apr  2 17:53:31 kernel:   Normal zone: 0 pages reserved
Apr  2 17:53:31 kernel:   Normal zone: 32512 pages, LIFO batch:7
Apr  2 17:53:31 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Apr  2 17:53:31 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Apr  2 17:53:31 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Apr  2 17:53:31 kernel: pcpu-alloc: [0] 0 
Apr  2 17:53:31 kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
Apr  2 17:53:31 kernel: Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs
Apr  2 17:53:31 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Apr  2 17:53:31 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Apr  2 17:53:31 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Apr  2 17:53:31 kernel: Writing ErrCtl register=00000040
Apr  2 17:53:31 kernel: Readback ErrCtl register=00000040
Apr  2 17:53:31 kernel: Memory: 126264k/131072k available (2839k kernel code, 4808k reserved, 416k data, 196k init, 0k highmem)
Apr  2 17:53:31 kernel: NR_IRQS:40
Apr  2 17:53:31 kernel: console [ttyS0] enabled
Apr  2 17:53:31 kernel: Calibrating delay loop... 249.34 BogoMIPS (lpj=498688)
Apr  2 17:53:31 kernel: pid_max: default: 32768 minimum: 301
Apr  2 17:53:31 kernel: Mount-cache hash table entries: 512
Apr  2 17:53:31 kernel: NET: Registered protocol family 16
Apr  2 17:53:31 kernel: bio: create slab <bio-0> at 0
Apr  2 17:53:31 kernel: SCSI subsystem initialized
Apr  2 17:53:31 kernel: usbcore: registered new interface driver usbfs
Apr  2 17:53:31 kernel: usbcore: registered new interface driver hub
Apr  2 17:53:31 kernel: usbcore: registered new device driver usb
Apr  2 17:53:31 kernel: PCI host bridge to bus 0000:00
Apr  2 17:53:31 kernel: pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
Apr  2 17:53:31 kernel: pci_bus 0000:00: root bus resource [io  0x10160000-0x1016ffff]
Apr  2 17:53:31 kernel: pci 0000:00:00.0: [1814:0801] type 01 class 0x060400
Apr  2 17:53:31 kernel: pci 0000:00:00.0: reg 0x14: [mem 0x20100000-0x2010ffff]
Apr  2 17:53:31 kernel: pci 0000:00:00.0: supports D1
Apr  2 17:53:31 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Apr  2 17:53:31 kernel: pci 0000:01:00.0: [1814:3091] type 00 class 0x028000
Apr  2 17:53:31 kernel: pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
Apr  2 17:53:31 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot
Apr  2 17:53:31 kernel: pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
Apr  2 17:53:31 kernel: pci 0000:00:00.0: BAR 1: assigned [mem 0x20100000-0x2010ffff]
Apr  2 17:53:31 kernel: pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x2000ffff]
Apr  2 17:53:31 kernel: pci 0000:00:00.0: PCI bridge to [bus 01-01]
Apr  2 17:53:31 kernel: pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
Apr  2 17:53:31 kernel: Switching to clocksource MIPS
Apr  2 17:53:31 kernel: NET: Registered protocol family 2
Apr  2 17:53:31 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Apr  2 17:53:31 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Apr  2 17:53:31 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Apr  2 17:53:31 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Apr  2 17:53:31 kernel: TCP: reno registered
Apr  2 17:53:31 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Apr  2 17:53:31 kernel: NET: Registered protocol family 1
Apr  2 17:53:31 kernel: PCI: CLS 32 bytes, default 32
Apr  2 17:53:31 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Apr  2 17:53:31 kernel: msgmni has been set to 246
Apr  2 17:53:31 kernel: io scheduler noop registered (default)
Apr  2 17:53:31 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Apr  2 17:53:31 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A
Apr  2 17:53:31 kernel: Ralink GPIO driver initialized. Number of GPIO: 96, GPIO mode: 0000185D
Apr  2 17:53:31 kernel: loop: module loaded
Apr  2 17:53:31 kernel: ralink flash device: 0x1000000 at 0x1c000000
Apr  2 17:53:31 kernel: Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
Apr  2 17:53:31 kernel: Ralink SoC physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Apr  2 17:53:31 kernel: Amd/Fujitsu Extended Query Table at 0x0040
Apr  2 17:53:31 kernel:   Amd/Fujitsu Extended Query version 1.1.
Apr  2 17:53:31 kernel: number of CFI chips: 1
Apr  2 17:53:31 kernel: Creating 7 MTD partitions on "Ralink SoC physically mapped flash":
Apr  2 17:53:31 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Apr  2 17:53:31 kernel: 0x000000030000-0x000000040000 : "Config"
Apr  2 17:53:31 kernel: 0x000000040000-0x000000050000 : "Factory"
Apr  2 17:53:31 kernel: 0x000000050000-0x0000001787e0 : "Kernel"
Apr  2 17:53:31 kernel: 0x0000001787e0-0x0000007f0000 : "RootFS"
Apr  2 17:53:31 kernel: 0x0000007f0000-0x000000800000 : "Storage"
Apr  2 17:53:31 kernel: 0x000000050000-0x000000800000 : "Firmware_Stub"
Apr  2 17:53:31 kernel: tun: Universal TUN/TAP device driver, 1.6
Apr  2 17:53:31 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Apr  2 17:53:31 kernel: Ralink APSoC Ethernet Driver v3.2.2 (raeth)
Apr  2 17:53:31 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
Apr  2 17:53:31 kernel: raeth: NAPI support, weight 32
Apr  2 17:53:31 kernel: raeth: Byte Queue Limits (BQL) support
Apr  2 17:53:31 kernel: PPP generic driver version 2.4.2
Apr  2 17:53:31 kernel: PPP MPPE Compression module registered
Apr  2 17:53:31 kernel: NET: Registered protocol family 24
Apr  2 17:53:31 kernel: PPTP driver version 0.8.5
Apr  2 17:53:31 kernel: Realtek RTL8367 GigaPHY Switch Driver v2.9.
Apr  2 17:53:31 kernel: rtl8367 - hw bridge: W|LLLL
Apr  2 17:53:31 kernel: usbcore: registered new interface driver libusual
Apr  2 17:53:31 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
Apr  2 17:53:31 kernel: xt_time: kernel timezone is -0000
Apr  2 17:53:31 kernel: Bridge firewalling registered
Apr  2 17:53:31 kernel: gre: GRE over IPv4 demultiplexor driver
Apr  2 17:53:31 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Apr  2 17:53:31 kernel: TCP: cubic registered
Apr  2 17:53:31 kernel: NET: Registered protocol family 10
Apr  2 17:53:31 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Apr  2 17:53:31 kernel: IPv6 over IPv4 tunneling driver
Apr  2 17:53:31 kernel: NET: Registered protocol family 17
Apr  2 17:53:31 kernel: L2TP core driver, V2.0
Apr  2 17:53:31 kernel: PPPoL2TP kernel driver, V2.0
Apr  2 17:53:31 kernel: 8021q: 802.1Q VLAN Support v1.8
Apr  2 17:53:31 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Apr  2 17:53:31 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Apr  2 17:53:31 kernel: Freeing unused kernel memory: 196k freed
Apr  2 17:53:31 kernel: Algorithmics/MIPS FPU Emulator v1.5
Apr  2 17:53:31 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
Apr  2 17:53:31 kernel: APSoC AP Driver version: 2.7.2.0
Apr  2 17:53:31 kernel: PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
Apr  2 17:53:31 kernel: RT309x AP Driver version: 2.7.1.5
Apr  2 17:53:31 kernel: usbcore: registered new interface driver usblp
Apr  2 17:53:31 kernel: Initializing USB Mass Storage driver...
Apr  2 17:53:31 kernel: usbcore: registered new interface driver usb-storage
Apr  2 17:53:31 kernel: USB Mass Storage support registered.
Apr  2 17:53:31 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr  2 17:53:31 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller
Apr  2 17:53:31 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Apr  2 17:53:31 kernel: ehci-platform ehci-platform: irq 18, io mem 0x101c0000
Apr  2 17:53:31 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Apr  2 17:53:31 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr  2 17:53:31 kernel: usb usb1: Product: Generic Platform EHCI Controller
Apr  2 17:53:31 kernel: usb usb1: Manufacturer: Linux 3.4.110 ehci_hcd
Apr  2 17:53:31 kernel: usb usb1: SerialNumber: ehci-platform
Apr  2 17:53:31 kernel: hub 1-0:1.0: USB hub found
Apr  2 17:53:31 kernel: hub 1-0:1.0: 2 ports detected
Apr  2 17:53:31 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr  2 17:53:31 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller
Apr  2 17:53:31 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Apr  2 17:53:31 kernel: ohci-platform ohci-platform: irq 18, io mem 0x101c1000
Apr  2 17:53:31 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Apr  2 17:53:31 kernel: usb usb2: Product: Generic Platform OHCI Controller
Apr  2 17:53:31 kernel: usb usb2: Manufacturer: Linux 3.4.110 ohci_hcd
Apr  2 17:53:31 kernel: usb usb2: SerialNumber: ohci-platform
Apr  2 17:53:31 kernel: hub 2-0:1.0: USB hub found
Apr  2 17:53:31 kernel: hub 2-0:1.0: 2 ports detected
Apr  2 17:53:31 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Apr  2 17:53:31 kernel: raeth: HW VLAN TX offload enabled
Apr  2 17:53:31 kernel: raeth: HW Scatter/Gather TX offload enabled
Apr  2 17:53:31 kernel: rtl8367 - green ethernet: off
Apr  2 17:53:31 kernel: rtl8367 - set broadcast storm control rate as: 10240 kbps
Apr  2 17:53:31 kernel: device eth2 entered promiscuous mode
Apr  2 17:53:34 kernel:  ch40 bssid=b8:3e:59:47:b7:97
Apr  2 17:53:34 kernel:  ch40 bssid=12:83:c7:d7:cc:ec
Apr  2 17:53:34 kernel:  ch40 bssid=d8:50:e6:58:7c:4c
Apr  2 17:53:34 kernel:  ch40 bssid=00:83:c7:d7:cc:ec
Apr  2 17:53:34 kernel:  ch44 bssid=f8:e9:03:0c:a1:7b
Apr  2 17:53:34 kernel:  ch44 bssid=fa:e9:03:0c:a1:7c
Apr  2 17:53:34 kernel:  ch44 bssid=3c:1e:04:de:f6:65
Apr  2 17:53:34 kernel:  ch44 bssid=3e:1e:04:de:f6:66
Apr  2 17:53:34 kernel:  ch149 bssid=80:00:6e:f3:d0:15
Apr  2 17:53:34 kernel: =====================================================
Apr  2 17:53:34 kernel: Channel 36 : Dirty = 128, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 40 : Dirty = 408, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 44 : Dirty = 408, False CCA = 2, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 48 : Dirty = 128, False CCA = 9, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 149 : Dirty = 70, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 153 : Dirty = 32, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 161 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: Channel 165 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:34 kernel: =====================================================
Apr  2 17:53:34 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 157 
Apr  2 17:53:34 kernel: Min Dirty = 0
Apr  2 17:53:34 kernel: ExChannel = 161 , 0
Apr  2 17:53:34 kernel: BW        = 40
Apr  2 17:53:34 kernel: device ra0 entered promiscuous mode
Apr  2 17:53:38 kernel:  ch1 bssid=48:ee:0c:4c:94:64
Apr  2 17:53:38 kernel:  ch1 bssid=4a:ee:0c:4c:94:65
Apr  2 17:53:38 kernel:  ch1 bssid=00:b2:8f:63:23:a8
Apr  2 17:53:38 kernel:  ch1 bssid=00:83:c7:d7:cc:e4
Apr  2 17:53:38 kernel:  ch1 bssid=c2:b2:8f:63:23:a8
Apr  2 17:53:38 kernel:  ch1 bssid=48:5d:36:ad:b0:b4
Apr  2 17:53:38 kernel:  ch1 bssid=52:83:c7:d7:cc:e4
Apr  2 17:53:38 kernel:  ch1 bssid=48:5d:36:36:47:02
Apr  2 17:53:38 kernel:  ch1 bssid=48:5d:36:0c:08:2a
Apr  2 17:53:38 kernel:  ch3 bssid=92:a4:23:e3:74:c5
Apr  2 17:53:38 kernel:  ch6 bssid=cc:0d:ec:46:4b:c6
Apr  2 17:53:38 kernel:  ch10 bssid=d8:50:e6:58:7c:48
Apr  2 17:53:38 kernel:  ch10 bssid=b8:3e:59:4a:99:93
Apr  2 17:53:38 kernel:  ch11 bssid=20:aa:4b:38:0c:c2
Apr  2 17:53:38 kernel:  ch11 bssid=b2:84:c9:93:6a:28
Apr  2 17:53:38 kernel:  ch11 bssid=d8:9d:67:c4:e0:ee
Apr  2 17:53:38 kernel:  ch11 bssid=32:20:c7:a7:76:38
Apr  2 17:53:38 kernel:  ch11 bssid=20:aa:4b:38:0c:c1
Apr  2 17:53:38 kernel:  ch11 bssid=f8:e4:fb:15:90:b0
Apr  2 17:53:38 kernel:  ch11 bssid=4c:60:de:34:89:85
Apr  2 17:53:38 kernel:  ch11 bssid=4e:60:de:34:89:86
Apr  2 17:53:38 kernel:  ch11 bssid=c8:a7:0a:c2:25:f8
Apr  2 17:53:38 kernel:  ch11 bssid=00:20:c7:a7:76:38
Apr  2 17:53:38 kernel: =====================================================
Apr  2 17:53:38 kernel: Channel 1 : Dirty = 658, False CCA = 103, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 2 : Dirty = 340, False CCA = 767, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 3 : Dirty = 346, False CCA = 182, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 4 : Dirty = 276, False CCA = 179, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 5 : Dirty = 240, False CCA = 225, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 6 : Dirty = 134, False CCA = 859, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 7 : Dirty = 300, False CCA = 711, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 8 : Dirty = 324, False CCA = 463, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 9 : Dirty = 368, False CCA = 136, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 10 : Dirty = 480, False CCA = 166, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: Channel 11 : Dirty = 764, False CCA = 625, Busy Time = 0, Skip Channel = FALSE
Apr  2 17:53:38 kernel: =====================================================
Apr  2 17:53:38 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 6 
Apr  2 17:53:38 kernel: Min Dirty = 134
Apr  2 17:53:38 kernel: ExChannel = 2 , 10
Apr  2 17:53:38 kernel: BW        = 40
Apr  2 17:53:38 kernel: device rai0 entered promiscuous mode
Apr  2 17:53:39 kernel: br0: port 3(rai0) entered forwarding state
Apr  2 17:53:39 kernel: br0: port 2(ra0) entered forwarding state
Apr  2 17:53:39 kernel: br0: port 1(eth2) entered forwarding state
Apr  2 17:53:39 kernel: rtl8367 - IGMP/MLD snooping: 1
Apr  2 17:53:39 dnsmasq[397]: started, version 2.75 cachesize 1024
Apr  2 17:53:39 dnsmasq[397]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Apr  2 17:53:39 dnsmasq-dhcp[397]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Apr  2 17:53:39 dnsmasq-dhcp[397]: DHCP, sockets bound exclusively to interface br0
Apr  2 17:53:39 dnsmasq[397]: read /etc/hosts - 3 addresses
Apr  2 17:53:39 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses
Apr  2 17:53:39 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Apr  2 17:53:39 kernel: eth3: ===> VirtualIF_open
Apr  2 17:53:39 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Apr  2 17:53:39 RT-N56U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Apr  2 17:53:39 RT-N56U: Hardware NAT/Routing: IPv4 UDP flow offload - OFF
Apr  2 17:53:39 DHCP WAN Client: starting on eth3 ...
Apr  2 17:53:40 DHCP WAN Client: bound (eth3), IP: —.—.—.—, GW: —.—.—.—, lease time: 21600
Apr  2 17:53:40 RT-N56U: WAN up (eth3)
Apr  2 17:53:40 dnsmasq[397]: read /etc/hosts - 3 addresses
Apr  2 17:53:40 dnsmasq[397]: read /etc/storage/dnsmasq/hosts - 0 addresses
Apr  2 17:53:40 dnsmasq-dhcp[397]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Apr  2 17:53:40 dnsmasq[397]: using nameserver 167.206.10.178#53
Apr  2 17:53:40 dnsmasq[397]: using nameserver 167.206.10.179#53
Apr  2 17:53:40 miniupnpd[447]: version 1.9 starting UPnP-IGD ext if eth3 BOOTID=1491170020
Apr  2 17:53:40 miniupnpd[447]: HTTP listening on port 45851
Apr  2 17:53:40 httpd[445]: Server listening port 80 (HTTP).
Apr  2 17:53:41 RT-N56U: starting OpenVPN client...
Apr  2 17:53:41 openvpn-cli[474]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Apr  2 17:53:41 kernel: br0: port 3(rai0) entered forwarding state
Apr  2 17:53:41 kernel: br0: port 2(ra0) entered forwarding state
Apr  2 17:53:41 kernel: br0: port 1(eth2) entered forwarding state
Apr  2 17:53:50 NTP Client: Synchronizing time to pool.ntp.org.
Apr  2 17:54:20 NTP Client: Synchronizing time to time.nist.gov.
Apr  2 17:54:24 NTP Client: System time changed, offset: 3.217247s
Apr  2 17:54:43 openvpn-cli[474]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts)

 

Thanks



#4 ulmwind

ulmwind

    Member

  • Members
  • PipPip
  • 22 posts

Posted 30 May 2017 - 10:37 PM

In you log there is no final line

 

tun0 up
 

 

showing successful connection.

Please, follow my guide: https://airvpn.org/topic/20315-airvpn-configuration-on-xrmwrt-padavan-preventing-traffic-leakage-outside-tunnel/

 

If you encounter difficulties, please, change

 

verb 0
 

 

to

 

verb 9
 

 

comment

 

#mute 0
 

 

in OpenVPN Extended Configuration, and bring just OpenVPN-log, not total log from router.







Similar Topics Collapse


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Servers online. Online Sessions: 14009 - BW: 35287 Mbit/sYour IP: 54.162.227.37Guest Access.