I have a QNAP NAS and am connected to AirVPN on the QNAP itself (NOT using Eddie or Router config) using "kradsith" guide here (AirVPN instructions at bottom of page 2);
All good! Connected fine and getting good speeds etc.
I have also set up two Port Forwards; 1 for plex (working fine - green TCP Test) and one for the QTS Admin console which by default uses port 8080. However the port forwarding for this port shows as yellow. I have removed the port forwarding to this port in my router but unsure why this shows as yellow. The port forwarding works fine i.e. I can use my own DDNS name with the AirVPN generated port and see my console but concerned that I have a leak as it currently is.
I guess I could try amending the console port from 8080 from within QNAP QTS Console and try fort forwarding again but reluctant to do that until I know why the TCP test shows as yellow.
Some other information which may be pertinent is I have port forwarding in my router for Sickrage, NZBGet, Couchpotato, Headphones, Transmission, (I'm not actually sure if I need ANY of these to be accessible from the internet as suspect they working fine together on the LAN as they are all hosted on my NAS/QNAP).
Could anyone provide me with any pointers, ideas, solutions?
Thanks in advance!