using stunnel ssl linux

[Vucnu 1]

Hi,

I have just installed stunnel. I have generated the config file using ssl tunnelling.

 

As ssl page I have run the command

stunnel "AirVPN <..> - SSL <..>.ssl" (of course I have launched it with the .ssl file from the generator.

I Have this output

 

 

Clients allowed=500
stunnel 4.53 on x86_64-pc-linux-gnu platform
Compiled with OpenSSL 1.0.1e 11 Feb 2013
Running  with OpenSSL 1.0.1f 6 Jan 2014
Update OpenSSL shared libraries or rebuild stunnel
Threading:PTHREAD SSL:+ENGINE+OCSP Auth:LIBWRAP Sockets:POLL+IPv6
Reading configuration from descriptor 3
Compression not enabled
PRNG seeded successfully
Initializing inetd mode configuration
Section stunnel: SSL server needs a certificate
str_stats: 2 block(s), 10 data byte(s), 116 control byte(s)
 

 

The command openvpn return me

 

TCP: connect to [AF_INET]127.0.0.1:1413 failed, will try again in 5 seconds: Connection refused
 

So, probably the problem are something in stunnel?

 

Please can you help?

 

Thanks

 

[Staff 9758]

Hello!

 

Which server are you connecting stunnel to?

 

From this line:

Section stunnel: SSL server needs a certificate

 

it might be a server-side problem.

 

Also, try with "stunnel4" instead of "stunnel"

 

Kind regards

[Vucnu 1]

stunnel4 solve the problem, but I have a dns problem. Ping just works but I can't use dns server.

 

Any solution please?

 

Thanks.

[Vucnu 1]

I have to manually set my own dns server?