Search the Community

Hello, I have one problem. I am using airvpn on dd-wrt router and that works like a charm. I also setup some policies as you suggested in previous posts, and some machines are on VPN and some are not. Now I have problem to setup access point. I do not want to use wireless repeater, because it is slow if many devices are connected... I want to wire access point (not wiereless) and use the same SSID as main router has... My configuration: DSL model (10.10.2.1) <-LAN-------WAN-> DD-WRT router (10.10.3.1) <-LAN-------LAN-> access point [non-dd-wrt] (?.?.?.?) DD-WRT 'sees' DSL modem (via routing), but DSL modem doesn't know for 10.10.3.1/24 network. What I did: 1. Disabled DHCP on access point 2. Connected router's LAN with access point's LAN (not WAN) 3. Set access point's IP address to 10.10.3.2... 4. Set router's channel to 6 5. Set access point's channel to 11 6. Set access point's SSID to the same SSID as router has and at the end I cannot establish IP anymore if I use access point's wireless network. I tried to leave on DHCP on access point..., but in that case I do not have access to the internet but I can connect to the access point's wireless... I suppose AirVPN's firewall commands are problem: iptables -I FORWARD -i br0 -o tun1 -j ACCEPT iptables -I FORWARD -i tun1 -o br0 -j ACCEPT iptables -I INPUT -i tun1 -j REJECT iptables -t nat -A POSTROUTING -o tun1 -j MASQUERADE iptables -I FORWARD -s 10.10.2.0/24 -j ACCEPT Can someone help me with this? Thanks in advance.