Search the Community

I purchased my first GL.Inet product and first thing I did was setup my AIRVPN OpenVPN on it - works flawlessly. My only question is Wireguard is supported and since the firmware of the router is based on openwrt, it has alot of configuration. Has anybody have success on having AirVPN on Wireguard on this router? If yes, what is the easiest setup to do?

New with VPNs, chose Airvpn, am on Macbook High Sierra. Downloaded Eddie according to the site, launched it but don't seem to be browsing thru it - looking at county specific content which does not appear, even if i specifically chose a server from that country. Then tried to set up a vpn connection through the macbook network preferences (L2TP) but needs a server name i can't find on the airvpn site. I use Firefox normally but also tried with Google Chrome without success. I'm not very tech savvy (maybe i shouldn't have chosen Airvpn because of this) so would appreciate some help to get started. thx!

God, I'm so lost... I just got a Raspberry Pi B+ board and it's my introduction to the world of Linux. I'm attempting to use it as a always on torrent box, with USB storage drive on samba. It will be headless and already running tightvnc. I am absolutely lost and don't even know how to install AirVPN on my Raspberry Pi. I looked in the configuration generator and want to use Cephei server, and know I have to tick the advance box, but what do I select on Advanced -Separate keys/certs from .ovpn file -Bundle executables: No64 bit32 bit -Resolved hosts in .ovpn file -All servers for area region -Filename Prefix: -Custom directives: Then after I download the package, where do I put it and how do I install it on my Raspberry Pi? I'm too much in a Windows state of mind with a setup.exe to wrap my head around it right now. Can someone please give me some dumbed down step by step instructions on installing from beginning to end? I need baby steps and command line commands.... I appreciate any and all help. Thanks PS. I'm running Rasparian on the RPi

Hello, How do i setup AirVPN over Tor, if dont want to use Eddie, but only the ovpn files and Tor? Also, do you have some n00b-friendly help how to do that on Whonix (their article on that https://www.whonix.org/wiki/Tunnels/Connecting_to_Tor_before_a_VPN is frighteningly complicated) Thank you in advance

Hey guys, Im new here as you might guess. Im having difficulties finding a beginner friendly manual on how to get started (Setting up VPN basically) Ive read a few step by step guides but cant seam to get this thing working. Any sources would be more than welcome Im on a macbook pro if that matters. Help!

Hey Everyone, Just learning the ropes with vpn's, got it working on my mac and my android phone, but having a bit of trouble with my arch linux laptop. I feel like I am just missing a step somewhere, but I following the instructions for the terminal setup (couldn't get the app to work, I'll play with it later). I made the config files, run 'openvpn configfile', it does its thing and I get the 'Initialization Sequence Completed'. But thats as far as I got becuase after that I have no internet. I feel like it must be a firewall issue or something isn't configured right. Anyone have any ideas? Thanks,

I am trying to configure AirVPN as per the website instruction. I am running a Netgear R7000 with DD-WRT firmware (DD-WRT v24-sp2 (04/16/14) kongac). I have loaded the settings as pictured, but there are a few additional settings that aren't mentioned in the guide. At any rate, the status page never updates and I do not connect. Settings screenshot attached. Thanks. DD-WRT AirVPN Settings.tiff

Good day, First of all I am running Ubuntu 14.04 on my laptop. What I want to achiev is to connect to tor via Airvpn. (That's the safest setup way, am I right?). Problems that I occure: To connect to Tor, I need to setup proxy in Airvpn client. Ant then use data in Tor configuration and achieve connection. Airvpn client without proxy setting works flawless. After I turn on proxy (socks5), I cant connect to server, I get reconnect loop, log: I 2015.03.09 11:03:54 - AirVPN client version: 2.8.8, System: Linux, Name: Ubuntu 14.10 \n \l, Architecture: x86 . 2015.03.09 11:03:54 - Reading options from /home/vibe/.airvpn/AirVPN.xml . 2015.03.09 11:03:56 - Data Path: /home/vibe/.airvpn . 2015.03.09 11:03:56 - App Path: /usr/lib/AirVPN . 2015.03.09 11:03:56 - Executable Path: /usr/lib/AirVPN/AirVPN.exe . 2015.03.09 11:03:56 - Command line arguments (1): path="/home/vibe/.airvpn" . 2015.03.09 11:03:57 - Operating System: Unix 3.16.0.23 - Linux Q 3.16.0-23-generic #31-Ubuntu SMP Tue Oct 21 18:00:35 UTC 2014 i686 i686 i686 GNU/Linux . 2015.03.09 11:03:57 - Updating systems & servers data ... I 2015.03.09 11:03:57 - OpenVPN Driver - Found I 2015.03.09 11:03:57 - OpenVPN - Version: OpenVPN 2.3.2 (/usr/sbin/openvpn) I 2015.03.09 11:03:57 - SSH - Version: OpenSSH_6.6.1p1 Ubuntu-8, OpenSSL 1.0.1f 6 Jan 2014 (/usr/bin/ssh) I 2015.03.09 11:03:57 - SSL - Version: stunnel 5.02 (/usr/bin/stunnel4) I 2015.03.09 11:03:57 - IPV6: Available ! 2015.03.09 11:03:57 - Ready . 2015.03.09 11:03:57 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:57 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:03:58 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:03:58 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) I 2015.03.09 11:04:49 - Session starting. I 2015.03.09 11:04:49 - Installing tunnel driver F 2015.03.09 11:04:50 - Only TCP protocol is allowed with a proxy. . 2015.03.09 11:04:58 - Updating systems & servers data ... . 2015.03.09 11:04:58 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:04:58 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:04:58 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) I 2015.03.09 11:05:12 - Session starting. I 2015.03.09 11:05:12 - Installing tunnel driver I 2015.03.09 11:05:12 - Retrieving manifest W 2015.03.09 11:05:12 - Unable to retrieve systems & servers data. Continue anyway with the old data. . 2015.03.09 11:05:12 - Updating systems & servers data ... I 2015.03.09 11:05:12 - Checking authorization ... . 2015.03.09 11:05:12 - Updating systems & servers data ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Checking authorization ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Checking authorization ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:12 - Updating systems & servers data ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Updating systems & servers data ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:13 - Cannot retrieve systems & servers data. Please retry later or contact us for help. (CUrl is not installed on this system, and it's required for SOCKS proxy.) . 2015.03.09 11:05:13 - Checking authorization ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:13 - Checking authorization ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:13 - Authorization check failed, continue anyway ({1]) ! 2015.03.09 11:05:13 - Connecting to Grafias (Netherlands, Amsterdam) I 2015.03.09 11:05:13 - DNS of the system will be updated to VPN DNS (ResolvConf method) . 2015.03.09 11:05:13 - OpenVPN > OpenVPN 2.3.2 i686-pc-linux-gnu [sSL (OpenSSL)] [LZO] [EPOLL] [PKCS11] [eurephia] [MH] [iPv6] built on Dec 1 2014 . 2015.03.09 11:05:13 - OpenVPN > MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:3100 . 2015.03.09 11:05:13 - OpenVPN > NOTE: the current --script-security setting may allow this configuration to call user-defined scripts . 2015.03.09 11:05:13 - OpenVPN > Control Channel Authentication: tls-auth using INLINE static key file . 2015.03.09 11:05:13 - OpenVPN > Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2015.03.09 11:05:13 - OpenVPN > Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication . 2015.03.09 11:05:13 - OpenVPN > Socket Buffers: R=[87380->131072] S=[16384->131072] . 2015.03.09 11:05:13 - OpenVPN > Attempting to establish TCP connection with [AF_INET]127.0.0.1:9150 [nonblock] . 2015.03.09 11:05:13 - OpenVPN > TCP connection established with [AF_INET]127.0.0.1:9150 . 2015.03.09 11:05:13 - OpenVPN > socks_handshake: server asked for username/login auth but we were not provided any credentials . 2015.03.09 11:05:13 - OpenVPN > SIGTERM[soft,init_instance] received, process exiting ! 2015.03.09 11:05:13 - Disconnecting . 2015.03.09 11:05:13 - Connection terminated. I 2015.03.09 11:05:16 - Checking authorization ... . 2015.03.09 11:05:16 - Checking authorization ..., 1° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 2° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 3° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 4° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 5° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 6° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 7° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) . 2015.03.09 11:05:16 - Checking authorization ..., 8° try failed (CUrl is not installed on this system, and it's required for SOCKS proxy., with 'socks' proxy and 'none' auth) W 2015.03.09 11:05:16 - Authorization check failed, continue anyway ({1]) I 2015.03.09 11:05:16 - Cancel requested. ! 2015.03.09 11:05:16 - Session terminated. By the way how to access Tor line in Airvpn->Preferences->Protocols? Off problem topic question - would openvpn increase security or solve problem? (Sorry newbie) Have a nice day, amen1337 P.S.: Sorry for poor English

Hi, I'm trying to setup the VPN on OSX. I already use Tunnelblick for another VPN. I navigated to the 'Config Generator' section to get the Tunnelblick config but all I see is a blank screen. I've tried this on both Safari and Chrome. I wanted to test the setup before making the purchase. Do I need to be a paid subscriber to setup the VPN?