Search the Community
Showing results for tags 'Eddie 2.10.3'.
Found 3 results
Thank you in advance for assistance. Try as we may we are unable to access our local network with 'Network Lock' activated. We have tried countless suggestions gleaned from forum posts and elsewhere that simply have not worked. Our network a very simple home system and our goal to be able to access a Ready NAS attached to the network. We are running Eddie 2.10.3 with network lock set to OS X - PF on Mavericks 10.9.5. ifconfig posted below for reference in case the 'Addresses Allowed' protocol we are using is incorrect although we have tried every conceivable permutation to no avail. Currently set to 22.214.171.124.25 Regards, Seth Last login: Wed Jul 20 22:46:50 on console MacBook:~ ourmac$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1<PERFORMNUD> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV> ether 3c:07:54:43:71:38 media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether b8: :12:37:17:8a inet 10.0.1.12 netmask 0xffffff00 broadcast 10.0.1.255 nd6 options=1<PERFORMNUD> media: autoselect status: active fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr a4:b1:97:ff:fe:a8:fb:de media: autoselect <full-duplex> status: inactive en2: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 options=60<TSO4,TSO6> ether d2:00:1a:8f:bd:e0 media: autoselect <full-duplex> status: inactive bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=63<RXCSUM,TXCSUM,TSO4,TSO6> ether 3e:07:54:34:2f:00 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 nd6 options=1<PERFORMNUD> media: <unknown type> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0a: :12:37:17:8a media: autoselect status: inactive utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.5.3.127 --> 10.5.3.127 netmask 0xffff0000 MacBook:~ ourmac
Hello. I recently purchased subscription to AirVPN services, and thanks to the documentation and the forum, I’ve managed to get the Eddie client (version 2.10.3) running quite well on my Windows 8.1 x64 laptop. My only problem is with the Network Lock function. I always use Network Lock. My one and only firewall is the embedded Windows Firewall. But it appears that Network Lock replace my firewall rules, even if they’re saved and ready to be set back if the Network Lock function is stopped. It is said that this replacement is done « beyond the scene », so that the rules don't seem changed when they actually are. So what if I have firewall rules that I need/want to keep active everytime I connect to the internet ? Could it be possible to merge the Network Lock firewall rules with my own firewall rules ? Great hope that there is a solution.
Hi New to AirVPN. I have set Network Lock mode to Auto but the main screen shows that Network Lock is disabled. I have set Eddie (2.10.3) to run Network Lock at start up but I get the following message "There is no available or enabled Network Lock mode" I am on XP and running the default Windows firewall. Appreciate your help