Opnsense wireguard port forward and local network

[steven-seagull 0]

I have selective routing configured on my network using wireguard in opnsense and have the following setup:

• Host A is routed through AirVPN wireguard interface
• Host A is listening to port 56310 which is forwarded on AirVPN
• The port test is working on AirVPN's website
• Host B is not routed through AirVPN, traffic goes through WAN interface

I can connect to Host A from an external network to {airvpnIP}:port. But I can't connect to Host A from Host B (on the same LAN) using {airvpnIP}:port. Am i missing a rule to allow this connection?  Any help would be appreciated.

[go558a83nk 378]

This is typical for VPN networking.  Just connect to Host A at its LAN IP address.

[steven-seagull 0]

Right that works perfectly fine if i use the internal ip address. But i need to connect to the external/airvpn ip. Is this possible?