curhen57 2 Posted ... Lately, I've been unable to get Eddie to connect to any server on my Linux operation system. It's always stuck while doing latency tests and I get this following error message. E 2021.12.27 13:47:45 - Exception: nft issue: exit:1; out:; err:Error: syntax error, unexpected rule, expecting string E 2021.12.27 13:47:45 - del rule ip filter OUTPUT ip daddr 52.48.66.85 counter accept E 2021.12.27 13:47:45 - ^^^^ If you need info on my OS... System: Host: <filter> Kernel: 5.14.0-4mx-amd64 x86_64 bits: 64 compiler: N/A parameters: BOOT_IMAGE=/vmlinuz-5.14.0-4mx-amd64 root=UUID=<filter> ro quiet splash slab_nomerge slub_debug=FZ init_on_alloc=1 init_on_free=1 page_alloc.shuffle=1 pti=on vsyscall=none debugfs=off oops=panic loglevel=0 spectre_v2=on spec_store_bypass_disable=on tsx=off tsx_async_abort=full,nosmt mds=full,nosmt l1tf=full,force nosmt=force kvm.nx_huge_pages=force ipv6.disable=1 apparmor=1 security=apparmor random.trust_cpu=off intel_iommu=on amd_iommu=on efi=disable_early_pci_dma kaslr pti=on slab_nomerge page_poison=1 slub_debug=FPZ nosmt Desktop: Xfce 4.16.0 tk: Gtk 3.24.24 info: xfce4-panel wm: xfwm4 dm: LightDM 1.26.0 Distro: MX-21_ahs_x64 Wildflower November 22 2021 base: Debian GNU/Linux 11 (bullseye) Machine: Type: Laptop System: ASUSTeK product: ROG Strix G713QM_G713QM v: 1.0 serial: <filter> Mobo: ASUSTeK model: G713QM v: 1.0 serial: <filter> UEFI: American Megatrends LLC. v: G713QM.314 date: 09/03/2021 Battery: ID-1: BAT0 charge: 87.5 Wh condition: 87.5/90.0 Wh (97%) volts: 17.2/15.9 model: AS3GWAF3KC GA50358 type: Li-ion serial: <filter> status: Full Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard K270 serial: <filter> charge: 100% (should be ignored) rechargeable: yes status: Discharging Device-2: hidpp_battery_1 model: Logitech M585/M590 Multi-Device Mouse serial: <filter> charge: 55% (should be ignored) rechargeable: yes status: Discharging CPU: Topology: 8-Core model: AMD Ryzen 9 5900HX with Radeon Graphics bits: 64 type: MCP arch: N/A family: 19 (25) model-id: 50 (80) stepping: N/A microcode: A50000B L2 cache: 4096 KiB flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 52703 Speed: 2857 MHz min/max: 1200/3300 MHz boost: enabled Core speeds (MHz): 1: 3370 2: 2728 3: 3567 4: 3239 5: 2523 6: 1916 7: 2650 8: 4126 Vulnerabilities: Type: itlb_multihit status: Not affected Type: l1tf status: Not affected Type: mds status: Not affected Type: meltdown status: Not affected Type: spec_store_bypass mitigation: Speculative Store Bypass disabled Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: always-on, IBRS_FW, STIBP: disabled, RSB filling Type: srbds status: Not affected Type: tsx_async_abort status: Not affected Graphics: Device-1: NVIDIA GA106M [GeForce RTX 3060 Mobile / Max-Q] vendor: ASUSTeK driver: N/A bus ID: 01:00.0 chip ID: 10de:2520 Device-2: AMD Cezanne vendor: ASUSTeK driver: amdgpu v: kernel bus ID: 06:00.0 chip ID: 1002:1638 Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz OpenGL: renderer: AMD RENOIR (DRM 3.42.0 5.14.0-4mx-amd64 LLVM 12.0.1) v: 4.6 Mesa 21.2.5 direct render: Yes Audio: Device-1: NVIDIA vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 01:00.1 chip ID: 10de:228e Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 06:00.1 chip ID: 1002:1637 Device-3: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: ASUSTeK driver: N/A bus ID: 06:00.5 chip ID: 1022:15e2 Device-4: AMD Family 17h HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus ID: 06:00.6 chip ID: 1022:15e3 Sound Server: ALSA v: k5.14.0-4mx-amd64 Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169 v: kernel port: e000 bus ID: 02:00.0 chip ID: 10ec:8168 IF: eth0 state: down mac: <filter> Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel port: e000 bus ID: 03:00.0 chip ID: 8086:2723 IF: wlan0 state: up mac: <filter> IF-ID-1: tun0 state: unknown speed: 10 Mbps duplex: full mac: N/A Drives: Local Storage: total: 7.50 TiB used: 3.22 TiB (43.0%) ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLQ1T0HBLB-00B00 size: 953.87 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: FXM7201Q scheme: GPT ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 970 EVO Plus 250GB size: 232.89 GiB block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: 2B2QEXM7 scheme: GPT ID-3: /dev/sda type: USB vendor: Seagate model: Backup+ Hub BK size: 7.28 TiB block size: physical: 4096 B logical: 512 B serial: <filter> rev: D781 scheme: GPT Partition: ID-1: / raw size: 63.98 GiB size: 62.68 GiB (97.96%) used: 13.97 GiB (22.3%) fs: ext4 dev: /dev/dm-0 ID-2: /boot raw size: 256.0 MiB size: 237.9 MiB (92.93%) used: 104.7 MiB (44.0%) fs: ext4 dev: /dev/nvme1n1p2 Sensors: System Temperatures: cpu: 51.0 C mobo: N/A gpu: amdgpu temp: 46 C Fan Speeds (RPM): cpu: 0 Repos: No active apt repos in: /etc/apt/sources.list Active apt repos in: /etc/apt/sources.list.d/airvpn-stable.list 1: deb http://eddie.website/repository/apt stable main Active apt repos in: /etc/apt/sources.list.d/atom.list 1: deb [arch=amd64] https://packagecloud.io/AtomEditor/atom/any/ any main Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list 1: deb http://deb.debian.org/debian bullseye-updates main contrib non-free Active apt repos in: /etc/apt/sources.list.d/debian.list 1: deb http://deb.debian.org/debian bullseye main contrib non-free 2: deb http://security.debian.org/debian-security bullseye-security main contrib non-free Active apt repos in: /etc/apt/sources.list.d/mx.list 1: deb https://mirror.us.oneandone.net/linux/distributions/mx/packages/mx/repo/ bullseye main non-free 2: deb https://mirror.us.oneandone.net/linux/distributions/mx/packages/mx/repo/ bullseye ahs Active apt repos in: /etc/apt/sources.list.d/whonix.list 1: deb [signed-by=/usr/share/keyrings/derivative.asc] https://deb.whonix.org bullseye main contrib non-free Info: Processes: 376 Uptime: 1h 32m Memory: 62.24 GiB used: 5.99 GiB (9.6%) Init: SysVinit v: N/A runlevel: 5 default: 5 Compilers: gcc: 10.2.1 alt: 10 Shell: quick-system-in running in: quick-system-in inxi: 3.0.36 Any help would be much appreciated. Thanks. Eddie_20211227_134819.txt Quote Share this post Link to post
OpenSourcerer 1359 Posted ... When it happens, in Eddie Logs tab, click the lifebelt icon and upload/paste the output here. There was a related issue with nft on Debian and others but it only appeared on kernels >=5.15. Does MX Linux backport kernel changes from newer kernels? Props to you for having used inxi by the way, but the info is way too verbose. I would've asked only for -SxxxiIz as the most relevant info bits for Eddie. Maybe -Gxx, too, if we're troubleshooting the UI. Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
curhen57 2 Posted ... I booted up Linux again just to what you told me but, all of a sudden, Eddie started working properly again... Huh... Quote Share this post Link to post
OpenSourcerer 1359 Posted ... All of a sudden Next time it happens, do post the support file. Thanks in advance. Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
Not connected, Your IP: 13.58.82.79
Online: 23361 users - 244830 Mbit/s total BW