AirVPN with DD-WRT and access point

[bitcoinivtu 0]

Hello,

 

I have one problem. I am using airvpn on dd-wrt router and that works like a charm. I also setup some policies as you suggested in previous posts, and some machines are on VPN and some are not.

Now I have problem to setup access point. I do not want to use wireless repeater, because it is slow if many devices are connected...

 

I want to wire access point (not wiereless) and use the same SSID as main router has...

 

My configuration:

 

DSL model (10.10.2.1) <-LAN-------WAN-> DD-WRT router (10.10.3.1) <-LAN-------LAN-> access point [non-dd-wrt] (?.?.?.?)

 

 

DD-WRT 'sees' DSL modem (via routing), but DSL modem doesn't know for 10.10.3.1/24 network.

 

 

What I did:

1. Disabled DHCP on access point

2. Connected router's LAN with access point's LAN (not WAN)

3. Set access point's IP address to 10.10.3.2...

4. Set router's channel to 6

5. Set access point's channel to 11

6. Set access point's SSID to the same SSID as router has

and at the end I cannot establish IP anymore if I use access point's wireless network.

 

I tried to leave on DHCP on access point..., but in that case I do not have access to the internet but I can connect to the access point's wireless...

 

 

I suppose AirVPN's firewall commands are problem:

iptables -I FORWARD -i br0 -o tun1 -j ACCEPT
iptables -I FORWARD -i tun1 -o br0 -j ACCEPT
iptables -I INPUT -i tun1 -j REJECT
iptables -t nat -A POSTROUTING -o tun1 -j MASQUERADE

iptables -I FORWARD -s 10.10.2.0/24 -j ACCEPT
 

 

 

 

Can someone help me with this?

 

Thanks in advance.

[bitcoinivtu 0]

No solution?

[MrConducter 11]

I probably can't help you very much, but where did you do this and why? 

  Quote

3. Set access point's IP address to 10.10.3.2...

 

I have a similar setup kinda.... modem -> non-ddwrt router (to broadcast wireless outside VPN) -> PFSENSE with AirVPN -> DDWRT Wireless Access Point.   

 

I set the local address to 192.168.1.2.  Does your AP router have these options?

  Quote

Use DNSMasq for DHCP or DNS?

I disabled those and disabled the WAN.

 

 

Hope this helps somewhat...

[MrConducter 11]

Also did you change the Wireless Mode to AP?

[bitcoinivtu 0]

My access point does not have ddwrt and cannot install it. So there is no DnsMask option. Access point is dodocool...

Yes, it is set to be access point.

[MrConducter 11]

Have you tried it without the firewall rules?