magnet2 0 Posted ... Hello, I downloaded and installed OpenVPN, and was trying to connect with the config file generated on airvpn site. However I was unable to connect. Here is the log: Sun Aug 28 18:42:12 2016 OpenVPN 2.3.12 x86_64-w64-mingw32 [sSL (OpenSSL)] [LZO] [PKCS11] [iPv6] built on Aug 23 2016Sun Aug 28 18:42:12 2016 Windows version 6.2 (Windows 8 or greater) 64bitSun Aug 28 18:42:12 2016 library versions: OpenSSL 1.0.1t 3 May 2016, LZO 2.09Sun Aug 28 18:42:12 2016 Control Channel Authentication: tls-auth using INLINE static key fileSun Aug 28 18:42:12 2016 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authenticationSun Aug 28 18:42:12 2016 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authenticationSun Aug 28 18:42:12 2016 Socket Buffers: R=[65536->262144] S=[65536->262144]Sun Aug 28 18:42:12 2016 UDPv4 link local: [undef]Sun Aug 28 18:42:12 2016 UDPv4 link remote: [AF_INET]62.102.148.142:443Sun Aug 28 18:42:12 2016 TLS: Initial packet from [AF_INET]62.102.148.142:443, sid=19e99b40 0c01f078Sun Aug 28 18:42:12 2016 VERIFY OK: depth=1, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=airvpn.org CA, emailAddress=info@airvpn.orgSun Aug 28 18:42:12 2016 Validating certificate key usageSun Aug 28 18:42:12 2016 ++ Certificate has key usage 00a0, expects 00a0Sun Aug 28 18:42:12 2016 VERIFY KU OKSun Aug 28 18:42:12 2016 Validating certificate extended key usageSun Aug 28 18:42:12 2016 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server AuthenticationSun Aug 28 18:42:12 2016 VERIFY EKU OKSun Aug 28 18:42:12 2016 VERIFY OK: depth=0, C=IT, ST=IT, L=Perugia, O=airvpn.org, CN=server, emailAddress=info@airvpn.orgSun Aug 28 18:42:12 2016 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySun Aug 28 18:42:12 2016 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSun Aug 28 18:42:12 2016 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit keySun Aug 28 18:42:12 2016 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authenticationSun Aug 28 18:42:12 2016 Control Channel: TLSv1.2, cipher TLSv1/SSLv3 DHE-RSA-AES256-GCM-SHA384, 4096 bit RSASun Aug 28 18:42:12 2016 [server] Peer Connection Initiated with [AF_INET]62.102.148.142:443Sun Aug 28 18:42:14 2016 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1)Sun Aug 28 18:42:14 2016 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 10.4.0.1,comp-lzo no,route-gateway 10.4.0.1,topology subnet,ping 10,ping-restart 60,ifconfig 10.4.24.212 255.255.0.0'Sun Aug 28 18:42:14 2016 OPTIONS IMPORT: timers and/or timeouts modifiedSun Aug 28 18:42:14 2016 OPTIONS IMPORT: LZO parms modifiedSun Aug 28 18:42:14 2016 OPTIONS IMPORT: --ifconfig/up options modifiedSun Aug 28 18:42:14 2016 OPTIONS IMPORT: route options modifiedSun Aug 28 18:42:14 2016 OPTIONS IMPORT: route-related options modifiedSun Aug 28 18:42:14 2016 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modifiedSun Aug 28 18:42:14 2016 ROUTE_GATEWAY 192.168.0.1/255.255.255.0 I=2 HWADDR=c8:f7:33:c0:63:7cSun Aug 28 18:42:14 2016 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0Sun Aug 28 18:42:14 2016 open_tun, tt->ipv6=0Sun Aug 28 18:42:14 2016 TAP-WIN32 device [Ethernet 3] opened: \\.\Global\{3B5251B0-000A-481D-875B-0E6C3C710727}.tapSun Aug 28 18:42:14 2016 TAP-Windows Driver Version 9.21Sun Aug 28 18:42:14 2016 Set TAP-Windows TUN subnet mode network/local/netmask = 10.4.0.0/10.4.24.212/255.255.0.0 [sUCCEEDED]Sun Aug 28 18:42:14 2016 Notified TAP-Windows driver to set a DHCP IP/netmask of 10.4.24.212/255.255.0.0 on interface {3B5251B0-000A-481D-875B-0E6C3C710727} [DHCP-serv: 10.4.255.254, lease-time: 31536000]Sun Aug 28 18:42:14 2016 NOTE: FlushIpNetTable failed on interface [7] {3B5251B0-000A-481D-875B-0E6C3C710727} (status=5) : Accesso negato.Sun Aug 28 18:42:19 2016 TEST ROUTES: 1/1 succeeded len=0 ret=1 a=0 u/d=upSun Aug 28 18:42:19 2016 C:\WINDOWS\system32\route.exe ADD 62.102.148.142 MASK 255.255.255.255 192.168.0.1Sun Aug 28 18:42:19 2016 ROUTE: route addition failed using CreateIpForwardEntry: Accesso negato. [status=5 if_index=2]Sun Aug 28 18:42:19 2016 Route addition via IPAPI failed [adaptive]Sun Aug 28 18:42:19 2016 Route addition fallback to route.exeSun Aug 28 18:42:19 2016 env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSun Aug 28 18:42:19 2016 ERROR: Windows route add command failed [adaptive]: returned error code 1Sun Aug 28 18:42:19 2016 C:\WINDOWS\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 10.4.0.1Sun Aug 28 18:42:19 2016 ROUTE: route addition failed using CreateIpForwardEntry: Accesso negato. [status=5 if_index=7]Sun Aug 28 18:42:19 2016 Route addition via IPAPI failed [adaptive]Sun Aug 28 18:42:19 2016 Route addition fallback to route.exeSun Aug 28 18:42:19 2016 env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSun Aug 28 18:42:19 2016 ERROR: Windows route add command failed [adaptive]: returned error code 1Sun Aug 28 18:42:19 2016 C:\WINDOWS\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 10.4.0.1Sun Aug 28 18:42:19 2016 ROUTE: route addition failed using CreateIpForwardEntry: Accesso negato. [status=5 if_index=7]Sun Aug 28 18:42:19 2016 Route addition via IPAPI failed [adaptive]Sun Aug 28 18:42:19 2016 Route addition fallback to route.exeSun Aug 28 18:42:19 2016 env_block: add PATH=C:\WINDOWS\System32;C:\WINDOWS;C:\WINDOWS\System32\WbemSun Aug 28 18:42:19 2016 ERROR: Windows route add command failed [adaptive]: returned error code 1Sun Aug 28 18:42:19 2016 Initialization Sequence Completed What went wrong? Quote Share this post Link to post
OpenSourcerer 1435 Posted ... Sun Aug 28 18:42:14 2016 NOTE: FlushIpNetTable failed on interface [7] {3B5251B0-000A-481D-875B-0E6C3C710727} (status=5) : Accesso negato. Access denied, I believe? Try running as admin. 1 magnet2 reacted to this Quote Hide OpenSourcerer's signature Hide all signatures NOT AN AIRVPN TEAM MEMBER. USE TICKETS FOR PROFESSIONAL SUPPORT. LZ1's New User Guide to AirVPN « Plenty of stuff for advanced users, too! Want to contact me directly? All relevant methods are on my About me page. Share this post Link to post
magnet2 0 Posted ... Sweet, it is working now! Thank you for pointing me in the right direction, I am still pretty new to all things VPN. Quote Share this post Link to post
LZ1 672 Posted ... Hello! Didn't you try AirVPNs own Eddie client? Just curious . Welcome to AirVPN. Sent to you from me with datalove Quote Hide LZ1's signature Hide all signatures Hi there, are you new to AirVPN? Many of your questions are already answered in this guide. You may also read the Eddie Android FAQ. Moderators do not speak on behalf of AirVPN. Only the Official Staff account does. Please also do not run Tor Exit Servers behind AirVPN, thank you. Did you make a guide or how-to for something? Then contact me to get it listed in my new user guide's Guides Section, so that the community can find it more easily. Share this post Link to post
Not connected, Your IP: 3.142.156.58
Online: 26526 users - 342251 Mbit/s total BW