Jump to content
Not connected, Your IP: 34.229.151.87

Recommended Posts

Thank you in advance for assistance.

Try as we may we are unable to access our local network with 'Network Lock' activated. We have tried countless suggestions gleaned from forum posts and elsewhere that simply have not worked.

Our network a very simple home system and our goal to be able to access a Ready NAS attached to the network.

We are running Eddie 2.10.3  with network lock set to OS X - PF on Mavericks 10.9.5.

ifconfig posted below for reference in case the 'Addresses Allowed' protocol we are using is incorrect although we have tried every conceivable permutation to no avail.  Currently set to 1.10.0.1.25

 

 

Regards,

 

 

Seth

 

 

 

Last login: Wed Jul 20 22:46:50 on console
MacBook:~ ourmac$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    options=3<RXCSUM,TXCSUM>
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    nd6 options=1<PERFORMNUD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether 3c:07:54:43:71:38
    media: autoselect (none)
    status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether b8: :12:37:17:8a
    inet 10.0.1.12 netmask 0xffffff00 broadcast 10.0.1.255
    nd6 options=1<PERFORMNUD>
    media: autoselect
    status: active
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
    lladdr a4:b1:97:ff:fe:a8:fb:de
    media: autoselect <full-duplex>
    status: inactive
en2: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether d2:00:1a:8f:bd:e0
    media: autoselect <full-duplex>
    status: inactive
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=63<RXCSUM,TXCSUM,TSO4,TSO6>
    ether 3e:07:54:34:2f:00
    Configuration:
        id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
        maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
        root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
        ipfilter disabled flags 0x2
    nd6 options=1<PERFORMNUD>
    media: <unknown type>
    status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
    ether 0a: :12:37:17:8a
    media: autoselect
    status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
    inet 10.5.3.127 --> 10.5.3.127 netmask 0xffff0000
MacBook:~ ourmac
 

Share this post


Link to post

Staff,
Given the inordinate amount of man hours we have dedicated in an attempt to resolve this issue we would appreciate a response from you.
With our a functioning lock the value of this service diminishes substantially.
At the very least please review the ifconfig file and advise weather our ‘address allowed’ entry is the correct format.

Also inadvertently we entered the following IP address into this field by mistake and it has broken the lock. In other words with this string of numbers entered into the ‘addresses allowed’ not only makes the LAN network available but when AirVPN is DISCONNECTED the entire operating system has open unfettered access to the internet. Please explain what is transiting here.

Thank you.


Seth

Share this post


Link to post

Staff,

Given the inordinate amount of man hours we have dedicated in an attempt to resolve this issue we would appreciate a response from you.

With our a functioning lock the value of this service diminishes substantially.

At the very least please review the ifconfig file and advise weather our ‘address allowed’ entry is the correct format.

 

 

Hello!

 

You all forgot to include the "ifconfig file" you cite. In any case, we would recommend that one, some or all of you open a ticket (please open just one ticket in total) to receive proper support from the Air support team. Here, anyway, you will receive support from the community, which is usually excellent.

 

Kind regards

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Security Check
    Play CAPTCHA Audio
    Refresh Image

×
×
  • Create New...