Solex1 2 Posted ... hello All,Are any of you having trouble connecting to port 443?53 works good, have not tried 80 yet.Many thanks in advance, Solex1 Quote Share this post Link to post
rainmakerraw 94 Posted ... (edited) Yes. See this thread. At first it seemed to be Google DNS issues but I'm on OpenDNS and now having problems again. I am also connecting over port 443 (UDP) and I was just disconnected and can't reconnect. The logs always say TLS negotiation/authentication failed after 60 seconds inactivity (no response received). It seems maybe something bigger is going on. Edit for logs showing an .ovpn for all NL servers (made in Air's config generator) connecting over 443 UDP timing out: 2014-06-03 01:54:22 *Tunnelblick: openvpnstart starting OpenVPN 2014-06-03 01:55:22 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) 2014-06-03 01:55:22 TLS Error: TLS handshake failed 2014-06-03 01:55:22 SIGUSR1[soft,tls-error] received, process restarting 2014-06-03 01:55:22 MANAGEMENT: >STATE:1401756922,RECONNECTING,tls-error,, 2014-06-03 01:55:22 MANAGEMENT: CMD 'hold release' 2014-06-03 01:55:22 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2014-06-03 01:55:22 Socket Buffers: R=[196724->65536] S=[9216->65536] 2014-06-03 01:55:22 MANAGEMENT: >STATE:1401756922,RESOLVE,,, 2014-06-03 01:55:22 UDPv4 link local: [undef] 2014-06-03 01:55:22 UDPv4 link remote: [AF_INET]62.212.72.175:443 2014-06-03 01:55:22 MANAGEMENT: >STATE:1401756922,WAIT,,, 2014-06-03 01:55:42 *Tunnelblick: Disconnecting; notification window disconnect button pressed 2014-06-03 01:55:42 *Tunnelblick: Disconnecting using 'kill' 2014-06-03 01:55:42 event_wait : Interrupted system call (code=4) 2014-06-03 01:55:42 SIGTERM received, sending exit notification to peer 2014-06-03 01:55:47 *Tunnelblick: No 'post-disconnect.sh' script to execute 2014-06-03 01:55:47 *Tunnelblick: Expected disconnection occurred. 2014-06-03 01:55:47 SIGTERM[soft,exit-with-notification] received, process exiting 2014-06-03 01:55:47 MANAGEMENT: >STATE:1401756947,EXITING,exit-with-notification,, Edited ... by rainmakerraw Quote Share this post Link to post
rainmakerraw 94 Posted ... I can confirm that port 80 works OK (NL servers over UDP) where port 443 is currently timing out. Tested on a MacBook Pro using the latest Tunnelblick beta and the latest openvpn v4.3.2. Quote Share this post Link to post
Staff 9973 Posted ... I can confirm that port 80 works OK (NL servers over UDP) where port 443 is currently timing out. Tested on a MacBook Pro using the latest Tunnelblick beta and the latest openvpn v4.3.2. Hi, this is some other problem, it's not related to DNS: from your logs the resolution is correct. At the moment we can only confirm you that there are no problems at all to connect to port 443, in UDP, to the NL servers (including Grafias, whose entry-IP is showed in your logs). Might it be a block by your ISP or by some system firewall to port 443 UDP? Kind regards Quote Share this post Link to post
rainmakerraw 94 Posted ... (edited) I can confirm that port 80 works OK (NL servers over UDP) where port 443 is currently timing out. Tested on a MacBook Pro using the latest Tunnelblick beta and the latest openvpn v4.3.2. Hi, this is some other problem, it's not related to DNS: from your logs the resolution is correct. At the moment we can only confirm you that there are no problems at all to connect to port 443, in UDP, to the NL servers (including Grafias, whose entry-IP is showed in your logs). Might it be a block by your ISP or by some system firewall to port 443 UDP? Kind regards It isn't a firewall issue as the problem is replicated across two devices running Linux and Mac OS X Mavericks respectively. I can connect sometimes and not at other times (it just disconnects then refuses to reconnect for a while). Also two other users are suggesting the exact same issue today, so it's not just me. I find it highly unlikely Virgin Media would be blocking access to some AirVPN servers, only some times. Plus I have now experienced a disconnection and failure to reconnect over port 80 also. Strange. EDIT: I have now managed to reconnect to NL over port 443 UDP. It would seem that an ISP block is very unlikely. Remember I didn't start this thread, I only replied to it. Currently the top two threads listed in the applet at the side of the forum are both about this issue, from two other different users. Edited ... by rainmakerraw Quote Share this post Link to post
Staff 9973 Posted ... I can confirm that port 80 works OK (NL servers over UDP) where port 443 is currently timing out. Tested on a MacBook Pro using the latest Tunnelblick beta and the latest openvpn v4.3.2. Hi, this is some other problem, it's not related to DNS: from your logs the resolution is correct. At the moment we can only confirm you that there are no problems at all to connect to port 443, in UDP, to the NL servers (including Grafias, whose entry-IP is showed in your logs). Might it be a block by your ISP or by some system firewall to port 443 UDP? Kind regards It isn't a firewall issue as the problem is replicated across two devices running Linux and Mac OS X Mavericks respectively. I can connect sometimes and not at other times (it just disconnects then refuses to reconnect for a while). Also two other users are suggesting the exact same issue today, so it's not just me. I find it highly unlikely Virgin Media would be blocking access to some AirVPN servers, only some times. Plus I have now experienced a disconnection and failure to reconnect over port 80 also. Strange. EDIT: I have now managed to reconnect to NL over port 443 UDP. It would seem that an ISP block is very unlikely. Remember I didn't start this thread, I only replied to it. Currently the top two threads listed in the applet at the side of the forum are both about this issue, from two other different users. Hello! There are around 800 clients currently connected to port 443 UDP of some NL server, globally. We have performed connections to 443 UDP from different ISPs (from Italy) to all the NL servers. No problem on our side has been detected. Maybe it's just a routing problem or some other problem between Virgin and Leaseweb (and optionally from the Solex1's ISP). Hopefully momentary. It must be said that this problem may overlap with the DNS issue. They might be two different problems that sometimes overlap, giving the feeling of erratic behavior. Kind regards Quote Share this post Link to post
rainmakerraw 94 Posted ... OK so I just got disconnected again after 15 mins 44 seconds, and I can't reconnect because the domain can't resolve. It's a weird issue, I agree. Although the log says inactivity timeout, the connection was active the whole time (downloading a torrent). Here is the log again from tunnelblick: 2014-06-03 03:14:12 *Tunnelblick: This computer's apparent public IP address changed from xx.xx.xxx.xxx before connection to 37.48.81.42 after connection 2014-06-03 03:28:31 *Tunnelblick: No 'reconnecting.sh' script to execute 2014-06-03 03:28:31 [server] Inactivity timeout (--ping-restart), restarting 2014-06-03 03:28:31 SIGUSR1[soft,ping-restart] received, process restarting 2014-06-03 03:28:31 MANAGEMENT: >STATE:1401762511,RECONNECTING,ping-restart,, 2014-06-03 03:28:31 MANAGEMENT: CMD 'hold release' 2014-06-03 03:28:31 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts 2014-06-03 03:28:31 Socket Buffers: R=[196724->65536] S=[9216->65536] 2014-06-03 03:28:31 MANAGEMENT: >STATE:1401762511,RESOLVE,,, 2014-06-03 03:29:01 RESOLVE: Cannot resolve host address: nl.vpn.airdns.org: nodename nor servname provided, or not known 2014-06-03 03:29:01 MANAGEMENT: >STATE:1401762541,RESOLVE,,, 2014-06-03 03:29:31 RESOLVE: Cannot resolve host address: nl.vpn.airdns.org: nodename nor servname provided, or not known Quote Share this post Link to post
Solex1 2 Posted ... Hello All,Strange, but i thought you all should know. Its not my isp. Im finding it has to do copyrights some country have and enforce them and other counties don't. Not sure so i will stop rambling.Many thanks in advance again, Solex1 Quote Share this post Link to post
Solex1 2 Posted ... Thanks for you input rainmakerraw and Staff.Regards. Solex1 Quote Share this post Link to post